Effect of molecular weight on synthesis and surface morphology of high-density poly(ethylene glycol) grafted layers

This work describes studying the permanent grafting of carboxylic acid end-functionalized poly(ethylene glycol) methyl ether (PEG) chains of different molecular weights from the melt onto a surface employing poly(glycidyl methacrylate) ultrathin film as an anchoring layer. The grafting led to the synthesis of the complete PEG brushes possessing exceptionally high grafting density. The maximum thickness of the attached PEG films was strongly dependent on the length of the polymer chains being grafted. The maximum grafting efficiency was close to the critical entanglement molecular weight region for PEG. All grafted PEG layers were in the "brush regime", since the distance between grafting sites for the layers was lower than the end-to-end distance for the anchored macromolecules. Scanning probe microscopy revealed that the grafting process led to complete PEG layers with surface smoothness on a nanometric scale. Practically all samples were partly or fully covered with crystalline domains that disappeared when samples were scanned under water. Due to the PEG hydrophilic nature, the surface with the grafted layer exhibited a low (up to 21 degrees ) water contact angle.     

Biosensors based on highly sensitive acetylcholinesterases for enhanced carbamate insecticides detection

This paper presents the construction of amperometric biosensors for the highly sensitive detection of carbamate insecticides based on the inhibition of acetylcholinesterase (AChE). This enzyme was immobilised by entrapment in an optimised sol-gel matrix on TCNQ-modified screen-printed electrodes. The enzyme activity was estimated by measuring the thiocholine produced by the enzymatic hydrolysis of the acetylthiocholine using TCNQ as mediator. Wild and genetically engineered AChEs from Drosophila melanogaster (Dm) were chosen for their high sensitivity towards insecticides, which substantially improves the LOD compared with cholinesterases from other sources. The wild type and three mutant enzymes were tested against three carbamate insecticides: carbaryl, carbofuran and pirimicard. The best LOD were obtained with the Y370A mutant for carbaryl (1 × 10⁻⁸ M), the E69W mutant for pirimicarb (2 × 10⁻⁸ M) and the I161V mutant for carbofuran (8 × 10⁻¹⁰ M). The biosensors were applied to the analysis of two potable water samples.     

Oxidatively truncated docosahexaenoate phospholipids: total synthesis,generation, and Peptide adduction chemistry

The recent immunological detection of extraordinarily high levels of carboxyethylpyrrole (CEP) modifications of proteins from the retinas of individuals with age-related macular degeneration provided presumptive evidence for the involvement of docosahexaenoate-derived oxidatively truncated phospholipids in retinal pathology. To facilitate the in vivo detection and characterization of the chemistry and biological activities of these postulated naturally occurring molecules, a family of oxidatively truncated phospholipids was prepared by total syntheses. Their formation in oxidation reactions of a docosahexaenoate ester of 2-lysophosphatidylcholine (DHA-PC) was also demonstrated. Free radical-induced oxidative cleavage of DHA-PC promoted by myeloperoxidase or copper ions generates similar mixtures of these phospholipids. The most abundant products were 1-palmitoyl-2-succinoyl-sn-glycero-3-phosphatidylcholine (4.7%) and 2-(6-carboxy-4-oxohex-5-enoyl)-1-palmitoyl-sn-glycero-3-phosphatidylcholine (1.7%). Both of these oxidatively truncated phospholipids are homologues of biologically active arachidonate-derived phospholipids. A minor product from DHA-PC, 2-(4-hydroxy-7-oxohept-5-enoyl)-1-palmitoyl-sn-glycero-3-phosphatidylcholine (0.4% yield), reacted with the epsilon-amino group of a peptide lysyl residue to produce a CEP derivative in 0.7% yield. These observations support the previous conclusion, based on immunological evidence, that CEPs are generated by the reaction of an oxidatively truncated phospholipid with proteins in the retina and further indicate that CEP protein modifications probably represent only a tiny fraction of the products generated upon oxidative damage of DHA-PC in photoreceptor disk membranes.     

{(Mo)Mo5O21(H2O)3(SO4)}12(VO)30(H2O)20]36-: a molecular quantum spin icosidodecahedron

Self-assembly of aqueous solutions of molybdate and vanadate under reducing, mildly acidic conditions results in a polyoxomolybdate-based {Mo72V30} cluster compound Na8K16(VO)(H2O)5[K10 subset{(Mo)Mo5O21(H2O)3(SO4)}12(VO)30(H2O)20].150H2O, 1, a quantum spin-based Keplerate structure.     

Thermal isomerization of cis,anti,cis-tricyclo[6.3.0.0(2,7)]undec-3-ene to endo-tricyclo[5.2.2.0(2,6)]undec-8-ene

[reaction: see text] The gas-phase thermal isomerization of cis,anti,cis-tricyclo[6.3.0.0(2,7)]undec-3-ene (1) to endo-tricyclo[5.2.2.0(2,6)]undec-8-ene (2) at 315 degrees C occurs cleanly through a symmetry-forbidden [1,3] suprafacial,retention (sr) pathway.     

Sequence-specific fluorescence detection of DNA by polyamide-thiazole orange conjugates

Fluorescent methods to detect specific double-stranded DNA sequences without the need for denaturation may be useful in the field of genetics. Three hairpin pyrrole-imidazole polyamides 2-4 that target their respective sequences 5'-WGGGWW-3', 5'-WGGCCW-3', and 5'-WGWWCW-3' (W = A or T) were conjugated to thiazole orange dye at the C-termini to examine their fluorescence properties in the presence and absence of match duplex DNA. The conjugates fluoresce weakly in the absence of DNA but showed significant enhancement (>1000-fold) upon the addition of 1 equiv of match DNA and only slight enhancement with the addition of mismatch DNA. The polyamide-dye conjugates bound specific DNA sequences with high affinity (Ka > 10(8) M(-1)) and unwound the DNA duplex through intercalation (unwinding angle, phi, approximately 8 degrees). This new class of polyamides provides a method to specifically detect DNA sequences without denaturation.     

Hydrodynamic voltammetry at the liquid|liquid interface: facilitated ion transfer and the rotating diffusion cell

A new approach to the voltammetric investigation of facilitated ion transfer processes is reported. The technique uses a rotating diffusion cell approach to induce laminar flow in the organic phase of a liquid|liquid electrochemical cell. The interface between two immiscible electrolyte solutions (ITIES) was stabilised against rotation with either γ-alumina or a track-etched polyester membrane. The resultant voltammetry is shown to be consistent with the Koutecký–Levich equation enabling kinetic parameters associated with facilitated transfer of sodium by dibenzo-18-crown-6 across the water|1,2-dichloroethane interface to be evaluated. In particular, the use of the more hydrophilic alumina membrane permits the uncertainties regarding the use of the membrane-stabilised ITIES, namely the interfacial position, to be eliminated.     

Characterization of a new qQq-FTICR mass spectrometer for post-translational modification analysis and top-down tandem mass spectrometry of whole proteins

The use of a new electrospray qQq Fourier transform ion cyclotron mass spectrometer (qQq-FTICR MS) instrument for biologic applications is described. This qQq-FTICR mass spectrometer was designed for the study of post-translationally modified proteins and for top-down analysis of biologically relevant protein samples. The utility of the instrument for the analysis of phosphorylation, a common and important post-translational modification, was investigated. Phosphorylation was chosen as an example because it is ubiquitous and challenging to analyze. In addition, the use of the instrument for top-down sequencing of proteins was explored since this instrument offers particular advantages to this approach. Top-down sequencing was performed on different proteins, including commercially available proteins and biologically derived samples such as the human E2 ubiquitin conjugating enzyme, UbCH10. A good sequence tag was obtained for the human UbCH10, allowing the unambiguous identification of the protein. The instrument was built with a commercially produced front end: a focusing rf-only quadrupole (Q0), followed by a resolving quadrupole (Q1), and a LINAC quadrupole collision cell (Q2), in combination with an FTICR mass analyzer. It has utility in the analysis of samples found in substoichiometric concentrations, as ions can be isolated in the mass resolving Q1 and accumulated in Q2 before analysis in the ICR cell. The speed and efficacy of the Q2 cooling and fragmentation was demonstrated on an LCMS-compatible time scale, and detection limits for phosphopeptides in the 10 amol/muL range (pM) were demonstrated. The instrument was designed to make several fragmentation methods available, including nozzle-skimmer fragmentation, Q2 collisionally activated dissociation (Q2 CAD), multipole storage assisted dissociation (MSAD), electron capture dissociation (ECD), infrared multiphoton induced dissociation (IRMPD), and sustained off resonance irradiation (SORI) CAD, thus allowing a variety of MS(n) experiments. A particularly useful aspect of the system was the use of Q1 to isolate ions from complex mixtures with narrow windows of isolation less than 1 m/z. These features enable top-down protein analysis experiments as well structural characterization of minor components of complex mixtures.     

Effect of substituents at silicon on the oxidative addition of trisubstituted silanes to [RhCl(cod)PPh3]

Summary Trisubstituted silanes, HSiR_3–n X _n (R = Me, Et, Pr or Bu; X = Cl, OEt or Ph; and n = 0–3) readily undergo oxidative addition to complex [RhCl(cod)PPh₃] (where cod = cycloocta-1,5-diene).The quantitative correlation between rate constants, k ₁, of the reaction, followed spectrophotometrically at 20 °C in benzene solutions, and the structure of tri-substituted silanes represented by stereoelectronic parameters , and E of the substituents, was established: logk ₁ = a + b + c + dE. The reaction rate is accelerated by electron-withdrawing substituents at silicon and retarded by the bulk and pd donation of nonalkyl substituents.Author to whom all correspondence should be directed.     

Diffusion coefficients of the monomer and oligomers in hydroxyethyl methacrylate

The diffusion coefficients are reported of rubbery ternary systems consisting of the polymer, its monomer analogue (i.e., the saturated equivalent of the monomer), and trace quantities of oligomers (dimer, trimer, tetramer and hexamer) for 2‐hydroxyethyl methacrylate (HEMA). These have been obtained with pulsed‐field‐gradient NMR spectroscopy with a polymer weight fraction (f_p) of 0 ≤ f_p ≤ 0.4. The oligomers are macromonomers synthesized with a cobalt catalytic chain‐transfer agent. The diffusion coefficients are about an order of magnitude smaller than those for monomers such as methyl methacrylate; this effect is ascribed to hydrogen bonding in HEMA. The diffusion coefficient D_i of an i‐meric oligomer has been fitted with moderate accuracy by an empirical universal scaling relation, D_i(f_p)/D₁(f_p) ≈ i, previously found to provide an adequate fit to corresponding data for styrene and for methyl and butyl methacrylates. The approximate empirical scaling relation seems to hold for a remarkably wide range of types of monomer/polymer systems. These results are of use in modeling rates and molecular weight distributions in free‐radical polymerization, particularly for termination (which is chain‐length‐dependent and is controlled by the diffusion coefficient of chains of the low degrees of polymerization studied here). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2491–2501, 2003