Use of SPE—TLC for Quality Control of Rhodiola rosea Extracts

SPE and TLC have been used for qualitative and quantitative analysis of salidroside, rosavin, rosarin, and rosin in commercially available dry extracts from Rhodiola rosea roots. The best separation of all the compounds was achieved on silica gel TLC plates with ethyl acetate—methanol—water, 77 + 13 + 10 (v/v), as mobile phase. UV detection was performed at λ = 215 nm for salidroside and at λ= 245 nm for the rosavins (rosavin, rosarin, and rosin). Detection limits for salidroside and the rosavins were 90 ng and 60 ng per spot, respectively. Results from quantitative analysis confirmed the manufacturer’s declaration of the amounts of salidroside and the rosavins in the extracts.

     

Aggregation des menschlichen Serumalbumins unter den Bedingungen der W ärmedenaturierung

Ohne Zusammenfassung     

Phase Analysis of the Binary System of Cryolite (Na3AlF6) and Sodium Metasilicate (Na2SiO3)

The phase analysis of cryolite (Na₃AlF₆) and sodium metasilicate (Na₂SiO₃) was performed by thermal analysis. The eutectic system with a region of two immiscible substances at a concentration of Na₂SiO₃ between 42.8 and 46.3 mol‐% was identified and the eutectic temperature determined to (886±2) °C. Based on the results of mass‐loss measurements, it was assumed that the introduced Na₂SiO₃ reacts with Na₃AlF₆ due to the formation of some nonvolatile stable compounds. The stable reaction products were identified by X‐ray diffraction analysis and IR spectroscopy of the spontaneously cooled samples, which established the formation of NaF and stable amorphous aluminosilicate compounds.     

Ab-initio molecular dynamics based on non-local density functional procedure with Gaussian basis; study of structural and temperature behaviour of metallic clusters

An ab-initio molecular dynamics procedure without precalculation of the Born-Oppenheimer energy surface based on an iterative non-local density functional method employing Gaussian atomic basis has been developed. Analytical gradients are calculated and used for the propagation of nuclei. Sufficiently long trajectories can be calculated at an acceptable computational cost, allowing for analysis of dynamical behaviour of small metallic clusters. This is illustrated on an example of the Li₈ cluster. Temperature behaviour of different type of isomers has been investigated. Calculated power spectra allow to identify the presence of more than one isomeric forms along the given trajectories.     

Sol-Gel Processing of PbZrO3 Thin Films

PbZrO₃ (PZ) thin films have been prepared by 2-methoxyethanol route from lead oxide or lead acetate and zirconium n-butoxide. The use of lead oxide as lead source and the seeding layer of TiO₂ on Pt/TiO₂/SiO₂/Si substrate facilitate the formation of the perovskite phase.     

Origin of organic gaseous products formed in the thermal decomposition of formates

The gaseous products of the thermal decomposition of formates have been investigated and compared with the products of formaldehyde and synthesis gas transformation under analogous conditions in the presence of the solids formed in the thermal decomposition of particular formates. It was found that formaldehyde transformation leads to organic compounds identical to those obtained in the thermal decomposition of the respective formates, while synthesis gas does not react under such conditions. This fact substantiates the hypothesis that formaldehyde is a precursor of the organic compounds identified in the thermal decomposition of formates. The nature of the organic componds obtained in the thermal decomposition of formates indicates that the formaldehyde formed in the initial stages is then transformed in the Cannizzaro or Tishchenko reactions.

---

Zusammenfassung Die gasförmigen Produkte der thermischen Zersetzung von Formiaten wurden untersucht und mit den Produkten verglichen, die bei der Umwandlung von Formaldehyd und Synthesegas unter analogen Bedingungen in Gegenwart von bei der thermischen Zersetzung von speziellen Formiaten gebildeten Feststoffen entstehen. Formaldehydumwandlungen führen zu organischen Verbindungen, die identisch mit denen sind, die bei der thermischen Zersetzung des betreffenden Formiats gebildet werden, während Synthesegas unter solchen Bedingungen nicht reagiert. Dies erhärtet die Hypothese, daß Formaldehyd eine Vorstufe der bei der thermischen Zersetzung von Formiaten identifizierten organischen Verbindungen ist. Die Natur der bei der thermischen Zersetzung von Formiaten auftretenden organischen Verbindungen weist darauf hin, daß das in den ersten Reaktionsschritten gebildete Formaldehyd nach der Cannizzaro-oder Tishchenko-Reaktion weiterreagiert.

---

, , . , i , . . , , . , , , .

     

Some radiation protection problems connected with the use of186Re-HEDP and153Sm-EDTMP for palliative therapy of bone metastases

The paper deals with the problem of the outpatient administration of¹⁸⁶Re-HEDP and¹⁵³Sm-EDTMP for palliative therapy of bone metastases. The subsequent 6 hours stay of the treated patients in a department of nuclear medicine appears to be in compliance with regulations proposed in the Czech Republic as well as with ICRP recommendations.     

Phase Diagram of the System NaF-KF-AlF3

The phase diagrams of the binary system KF-AlF₃ as well as the ternary system NaF-KF-AlF₃ in the range up to 50 mol% AlF₃, were measured using the thermal analysis method. In the system KF-AlF₃ the coordinates of the eutectic points are: E ₁: 8.0 mol% AlF₃, 821.2°C, and E ₂: 45.5 mol% AlF₃, 565.0°C. In the investigated concentration range of the ternary system 2 eutectic points have been found with the calculated coordinates: E ₁: 36.3 mol% NaF, 62.7 mol% KF, 1.0 mol% AlF₃; t=711.2°C; and E ₂: 51.9 mol% NaF, 27.4 mol% KF, 20.7 mol% AlF₃; t=734.5°C. Other eutectic points lie most probably beyond the investigated part of the system. This revised version was published online in July 2006 with corrections to the Cover Date.     

Lifetime prediction of ABS polymers based on thermoanalytical data

The service life of ABS polymer, stabilized by 2-(3,5-di-tert-butyl-4-hydroxyanilino)-4,6-bis(octylthio)-1,3,5-triazine and containing 50% of a modifying rubber component, was estimated from oxidative induction times measured by DSC in isothermal mode in the temperature interval 140–170°C. The lifetime of ABS powder at the actual temperature of drying was predicted by linear extrapolation according to Arrhenius. However, the extrapolated value was much longer than the real lifetime determined from the long-term oven aging tests at 70 and 90°C, simulating the industrial drying process. The effect of changes in the apparent activation energy of oxidation due to antioxidant consumption during polymer aging is discussed.     

Properties of cerium-zirconium mixed oxides partially substituted by neodymium: Comparison with Zr-Ce-Pr-O ternary oxides

CeO₂ doped with praseodymium, neodymium and/or zirconium atoms were prepared by coprecipitation and by the sol-gel method. Structural properties were investigated by in situ XRD and Raman spectroscopy while oxygen storage capacity (OSC) was measured by transient CO oxidation. All the compounds, except pure Nd₂O₃, have a fluorite-type structure as well as a Raman band at 560 cm⁻¹ characteristic of the oxygen vacancies involving non-stoichiometric oxides. The lattice parameter under hydrogen, being dependent on the temperature, revealed two reduction mechanisms: one at a low temperature at the surface and another at a high temperature in the bulk. Ce-Nd binary oxides show a strong tendency towards crystallite aggregation, which reduces accessibility to gases and OSC properties. Zirconium improves the thermal resistance to sintering of both Ce-Nd and Ce-Pr oxides. The Zr-Ce-Pr-O followed by Zr-Ce-Nd-O compounds displaying high oxygen mobility at a low temperature, appear to be very promising for practical applications such as OSC materials.