Investigation of potential-sensitive fluorescent dyes for application in nitrate sensitive polymer membranes

The applicability of various potential-sensitive dyes (PSD) for optical sensing of anions is reported. Specifically, nitrate-responsive polymer membranes have been developed which are composed of a plasticized polymer, an anion exchange catalyst, and a fluorescent dye. On exposure to nitrate, the fluorescence intensity of such membranes increases, while the wavelengths of the excitation and emission maxima remain virtually unchanged. The membranes typically are 2–4 μm thick and exhibit highest sensitivity to nitrate in the 2 to 200 mgl^–1 range. Signal changes on exposure to 100 mmol/l nitrate can be as high as +300%. The detection limit is 0.2 mgl^–1. The cationic PSD octadecyl acridine organe was tested in combination with a tin-organic and an indium-organic anion carrier rather than with tridodecylmethylammonium chloride, but both carriers were found to display no improved selectivity. Received: 2 December 1995 / Revised: 28 March 1996 / Accepted: 5 April 1996     

Structural dependence of non-linear optical properties of 4-Dimethylamino-3-cyanobiphenyl

 4-Dimethylamino-3-cyanobiphenyl (4-DMA-3-CB) was characterized with respect to linear and nonlinear optical properties in a crystal as well as in solution. The crystal structure was studied dependent on the crystallization conditions. It is shown that the crystal structure exhibiting NLO-activity can completely be solved by a combination of electron diffraction and computer modeling. There are four molecules per unit cell in the space group Pna2₁ with dimensions a=10.28 Å, b=22.64 Å, c=5.27 Å. From this model structure the values and orientation of the dipole μ and static second order polarizability β can be calculated. Their relevance to the values obtained by a combination of polarization dependent measurements of Electric Field Induced Second Harmonic Generation (EFISH) and Hyper-Rayleigh-Scattering (HRS) in solution are discussed. The molecular second order polarizability tensor was found to be dominated by one single component. The orientations of the dipole and the vectorial parts of the second order polarizability delivered by the semiempirical calculations are in good agreement with the results of the EFISH and HRS-measurements and allow a deeper insight into the nonlinear optical properties of the crystal. Received: 15 April 1996 Accepted: 21 June 1996     

Stability and Mobility of Metal-Humic Complexes Isolated from Different Soils

The contamination of potable water aquifers by heavy metals is one of the most severe environmental threats. For the transport of heavy metals from various types of contaminated sites into the ground water and also into surface water aquifers, humic substances (HS) are recognized to be of main importance. Dissolved in natural waters humic substances are readily complexed with a variety of metal ions. Therefore, humic substances are of cardinal importance for the migration and, consequently, the pollution of ground waters with heavy metals. Our paper presents the results of a comprehensive comparison of several isolated humic acids of soils of different origin (different geochemical milieu) and their metal complexes. Two polluted sites in Germany, which differ in their geochemical milieu (pH-value) were selected. The aim of our experiments was to describe the properties of terrestrial humic substances depending on their origin and genesis as well as the effects of the transport of humic substance-bound metals into the water-unsaturated soil zone. After determination of heavy metals in the soils by photon activation analysis the activated soil was used as an inherent tracer in batch experiments with the isolated humic acid. After adsorption of the loaded humic acid on an XAD-8 resin column, the partition of metals mobilized by humic acids could be quantified. There are correlations of the formation of metal-humic complexes with the soil pedogenes, with the pH-value as well as with the humic acid concentration.     

Dynamics of protein and mixed protein/surfactant adsorption layers at the water/fluid interface

The adsorption behaviour of proteins and systems mixed with surfactants of different nature is described. In the absence of surfactants the proteins mainly adsorb in a diffusion controlled manner. Due to lack of quantitative models the experimental results are discussed partly qualitatively. There are different types of interaction between proteins and surfactant molecules. These interactions lead to protein/surfactant complexes the surface activity and conformation of which are different from those of the pure protein. Complexes formed with ionic surfactants via electrostatic interaction have usually a higher surface activity, which becomes evident from the more than additive surface pressure increase. The presence of only small amounts of ionic surfactants can significantly modify the structure of adsorbed proteins. With increasing amounts of ionic surfactants, however, an opposite effect is reached as due to hydrophobic interaction and the complexes become less surface active and can be displaced from the interface due to competitive adsorption. In the presence of non-ionic surfactants the adsorption layer is mainly formed by competitive adsorption between the compounds and the only interaction is of hydrophobic nature. Such complexes are typically less surface active than the pure protein. From a certain surfactant concentration of the interface is covered almost exclusively by the non-ionic surfactant. Mixed layers of proteins and lipids formed by penetration at the water/air or by competitive adsorption at the water/chloroform interface are formed such that at a certain pressure the components start to separate. Using Brewster angle microscopy in penetration experiments of proteins into lipid monolayers this interfacial separation can be visualised. A brief comparison of the protein adsorption at the water/air and water/n-tetradecane shows that the adsorbed amount at the water/oil interface is much stronger and the change in interfacial tension much larger than at the water/air interface. Also some experimental data on the dilational elasticity of proteins at both interfaces measured by a transient relaxation technique are discussed on the basis of the derived thermodynamic model. As a fast developing field of application the use of surface tensiometry and rheometry of mixed protein/surfactant mixed layers is demonstrated as a new tool in the diagnostics of various diseases and for monitoring the progress of therapies.     

Time-dependent mixing and demixing processes in binary lipid monolayers studied by mixed and separate spreading using film pressure and film potential measurements

Using both spreading techniques — mixed spreading and separate spreading- and, simultaneously, film pressure and film potential measurements, the mixing behavior of the following five binary systems was investigated and compared: 1) system 1,2-dilauroyl-phosphatidylethanolamine/cholesterol; 2) system 1,2-dimyristoyl-phosphatidylethanolamine/cholesterol; 3) system 1,2-dipalmitoyl-phosphatidylethanolamine/cholesterol; 4) system Na-eicosyl sulphate/hexadecanol; 5) system phosphatidic acid/1,2-dimyristoyl-phosphatidylethanolamine.Analyzing the time and concentration dependence of the /a isotherms and v/a isotherms (^s = film pressure, v ^s potential,a=average area per molecule in mixed films in the monolayers) of the binary monolayers it can be concluded that the components of the binary systems 1–4 are complete miscible in the monolayers. On the other hand the components of the system 5 are probably partially miscible only.     

Kinetics of the manganese(III)-oxalate reaction in acidic sulphate media

The kinetics of the reaction of manganese(III) with oxalic acid (OA) has been studied in H₂SO₄ solutions. Under the experimental conditions of 6 × 10^–3 <>₀ < 0.4=" mol=">^–3 and [H₂SO₄]₀ 0.2 mol dm^–3 the observed pseudo-first order rate constant k _obs follows the expression

Novel Redox-Active Cyclophanes Based on 3,3'-Biindolizines: Synthesis and Chirality

The first compounds of a new series of redox-active cyclophanes were prepared by dehydrocyclization of bridged indolizines of type 1. The bridged dipyridino-compounds 2a and 2b obtained by reaction of 2 mol of lithiated alpha-picolines with dihalides were used as starting materials. Subsequent treatment of 2a,b with 2 mol of alpha-bromo ketones gave quaternary pyridinium halides. Ring closure in an alkaline medium (Chichibabin reaction) yielded the starting material for the synthesis of the macrocycles. Oxidative C-C coupling gave the diastereomeric cyclophanes of type 3. In all cases one pair of the enantiomers was obtained in excess. CV-investigations have shown that the main products are reversible redox systems. To clarify their conformations, compounds 3c, 3d/1, and3d/2 were subjected to X-ray analysis.     

Experimental and theoretical study of the hyperfine structure in the (5d+6s)96p configurations of Pt I

The hyperfine structure of the odd configurations 5d ⁹6p and 5d ⁸6s6p was studied with laser optogalvanic spectroscopy and high resolution interferometry in a platinum hollow cathode. A parametric hyperfine structure analysis for the configurations (5d+6s)⁹6p with 10 excited odd-parity levels was performed for¹⁹⁵Pt. We obtained one-electron hfs parameters,a _5d ⁰¹ =1160(320) MHz,a _6s ¹⁰ =35600(5300) MHz anda _6p ⁰¹ =1300(780) MHz for the configuration 5d ⁸6s6p. The corresponding $\left\langle {r^{ - 3} } \right\rangle _{nl}^{k_s k_l } $ values are compared with those known for other 5d-elements.     

Modelling the surface free energy parameters of polyurethane coats—part 2. Waterborne coats obtained from cationomer polyurethanes

Polyurethane cationomer coats were synthesised on the basis of typical diisocyanates, properly selected polyether polyols, HO-tertiary amines and HCOOH as quaternisation reagents. The values of their surface free energy (SFE) parameters were obtained by the van Oss-Good method, with the use of the contact angle values which had been found by the goniometric method. Based on the obtained findings, empirical models were developed which made it possible to anticipate the effects of the raw material types on the SFE values of the produced coats. The possibility was noted to adjust the SFE values within 25–50 mJ/m² by selecting carefully suitable parent substances. The principal consequences for the formation of improved hydrophobicity coats, applicable inter alia specialised protective coatings, were found to come not only from diisocyanate and polyol types but also from the alkylammonium cation structure which results from the use of different tertiary amines. The fundamental SFE lowering effect was noted when tertiary amines with 0–15 % of the 2,2,3,3-tetrafluoro-1,4-butanediol as a fluorinated chain extender was incorporated into polymer chains.