Crystal growth of Co ferrite on fine acicular γ-Fe2O3 particles

Highly coercive magnetic powder was obtained by growing cobalt ferrite on the surface of γ-Fe₂O₃ particles in highly alkaline suspensions containing cobalt and ferrous ions in a Co/Fe molar ratio = $\text{1}\text{2}$. The mechanism of the growth and the structure of cobalt ferrite on γ-Fe₂O₃ were studied by X-ray diffraction and electron diffraction techniques. Results show that crystals of cobalt ferrite CoFe₂O₄ with a spinel type crystal structure of lattice constant 8.415 Å grew epitaxially on γ-Fe₂O₃. The acicular direction of the epitaxially grown Co-γ-Fe₂O₃ as well as γ-Fe₂O₃ was in the [$\text{1}$01] direction. It was found that from the lattice constant value and the half width of X-ray diffraction peaks, the lattice constant epitaxially grown Co γ-Fe₂O₃ may be attributed to two kinds of crystals, viz., seed γ-Fe₂O₃ ($\text{a = 8.35 ～ 8.37}\text{A}\text{?}$) which was partly reduced to Fe₃O₄, and surface layer CoFe₂O₄ ($\text{a = 8.415}\text{A}\text{?}$). The crystal growth in the interface between the seed crystals and the growth layer was affected by the crystal structure of the seed crystals. The lattice constant of CoFe₂O₄ which was located in the vicinity of the interface was almost equal to that of the seed crystals.     

Magnetic scattering of neutrons in magnetic superconductors

The magnetic dipolar interaction responsible for the neutron scattering due to magnetic moments in a crystal is affected by the persistent current in the superconducting state. From this effect, the small angle scattering of neutrons is strongly depressed, and the intensity maximum of the critical scattering appears at a finite scattering wave number even in ferromagnetic superconductors.     

Structure of dichlorine monoxide as studied by microwave spectroscopy. Determination of equilibrium structure by a modified mass dependence method

The microwave spectra of four isotopic species of dichlorine monoxide (OCl₂) have been observed, and the rotational constants have been obtained. The r_m structure for each isotopic species has been determined by Watson's method. The equilibrium structure has been estimated by taking proper averages of r_m structures to be $\text{r}{}_{\mathrm{e}}\text{(OCl) = 1.69587(7)}\text{A}\text{?}$ and ∠_eClOCl = 110.886(6)°. The general applicability and the merit of the present method for estimating the equilibrium structure are pointed out.     

A study on the effect of filling factor for laser action in dielectric random media

In a random system composed of dielectric materials, laser action is expected to occur from the light localization caused by multiple scattering and interference effect. The wavelengths at which the laser oscillation occurs in random media depend on the mean free path of continuous scattering. Since the mean free path of continuous scattering is dependent on the filling factor, it is important to investigate systematically the effect of the filling factor for the laser action. In the present study, we calculate the Poynting vectors of the light emitted from two-dimensional random media consisting of dielectric rods with population inversion modeled by the negative imaginary part of relative permittivity. The spectra of the radiated Poynting vectors from the two-dimensional random media are shown for several different filling factors and for various values of population inversion. We try to find laser generation which occurs at low population inversion and discuss about the threshold of laser action occurring in dielectric structures with different filling factors. We also study the spacial distribution of the electric field amplitude in several frequency regions where light strongly amplifies.     

White light emission of Mn-doped SnO-ZnO-P2O5 glass containing no rare earth cation

The authors have demonstrated white light emission of rare earth (RE)-free Mn-doped SnO-ZnO-P(2)O(5) glass. The RE-free glass shows white light emission with a high value of quantum efficiency (QE) comparable to conventional crystalline phosphor. It is notable that the high QE value is attained for RE-free transparent glass, and the broad emission can be continuously tuned by both the amount of activator and the composition of the glass. Since this glass possesses low-melting property, we emphasize that the glass phosphor will lead to the development of a novel inorganic white-light-emitting device in combination with a solid state UV light-emitting source.     

Optical conductivity spectral anomalies in the off-center rattling system β-Ba8Ga16Sn30

We present optical conductivity studies of the type-I clathrate Ba8Ga16Sn30, using a terahertz time-domain spectrometer (0.3-3.0?THz). The lowest-lying spectral peak at 0.72?THz due to the Ba(2) ion's off-center vibration in the oversized cage shows a drastic and anomalous temperature dependence. Below about 100?K, the single broad peak splits into two subpeaks, and with further lowering of the temperature, the spectral shape of this so-called rattling phonon shows non-Boltzmann broadening to the point that the linewidth becomes comparable to the peak frequency. Whereas the initial splitting can be understood by assuming a multiwell anharmonic potential, the strong linewidth broadening toward low temperature cannot, since the Boltzmann factor generally sharpens the low-temperature spectra. The observed behavior suggests strong interaction between the local anharmonic phonons and other excitations.     

Application of pressure sensitive paint measurement to a low-solidity cascade diffuser of a transonic centrifugal compressor

A pressure sensitive paint (PSP) measurement has been known as a pressure field measurement technique based on the oxygen quenching phenomenon of luminescence of specific luminophores. A PSP measurement was applied for pressure field measurement in a low-solidity circular cascade diffuser of a single-stage transonic centrifugal compressor with 5 in pressure ratio for HFC134a gas. The oxygen concentration was about 500 ppm. Ru (bath-phen) was adsorbed on a silica-gel thinlayer chromatography sheet, and the sheet was pasted onto the side-wall between the cascade vanes. A drastic change in luminescent intensity was recognized during a surge condition. Also the pressure variations based on luminescent intensity agreed well with the pressure fluctuations measured using a semiconductor pressure sensor with high-frequency-response. It was shown that a PSP measurement worked well to investigate the unsteady pressure fields in a circular cascade diffuser of a transonic centrifugal compressor. Moreover, the time response of PSP becomes clear as a problem to be overcome for the present.     

Achievement of a 920-MHz high resolution NMR

We have developed a 920-MHz NMR system and performed the proton NMR measurement of H(2)O and ethylbenzene using the superconducting magnet operating at 21.6 T (920 MHz for proton), which is the highest field produced by a superconducting NMR magnet in the persistent mode. From the NMR measurements, it is verified that both homogeneity and stability of the magnet have a specification sufficient for a high resolution NMR.     

PSP measurement of flow fields in a supersonic combustor with a backward-facing step

The mixing fields within a SCRAM-jet combustion chamber are visualized using pressuresensitive paint (PSP) as an oxygen sensor. The experiments are performed in a small supersonic wind tunnel at the National Aerospace Laboratory — Kakuda Research Center (NAL-KRC). The main stream Mach number is 2.4, and the dynamic pressure ratios between the injected gas and the main flow are 0.3, 0.7, 1.1 and 1.5. Three fuel injection nozzles are used; oxygen is injected from the central nozzle and air from the two nozzles at either side. The spread of the injected gas is measured to observe the effects of placing the nozzles in different positions. The results show that the jet has its own independent flow structure, and that little mixing of gases occurs between the flow structures created by each nozzle. When the injection dynamic pressure ratio is increased, the oxygen fraction rises in the recirculation zone and falls in the separation zone downstream of the injection.