Ultrasonics in the dehydration process of sludge

This paper discusses from the physico-chemical point of view the increase of the dehydration efficiency of sludge from some selected mineral and organic sewages as a result of preliminary ultrasound irradiation and the addition of ion-active flocculants.     

Tumor suppressor Fhit protein interacts with protoporphyrin IX in vitro and enhances the response of HeLa cells to photodynamic therapy

Fhit, the product of tumor suppressor fragile histidine triad (FHIT) gene, exhibits antitumor activity of still largely unknown cellular background. However, it is believed that Fhit-Ap(3)A or Fhit-AMP complex might act as a second class messenger in cellular signal transduction pathway involved in cell proliferation and apoptosis. We demonstrate here for the first time that the photosensitizer, protoporphyrin IX (which is a natural precursor of heme) binds to Fhit protein and its mutants in the active site in vitro. Furthermore, PpIX inhibits the enzymatic activity of Fhit. Simultaneously, PpIX shows lower binding capacity to mutant Fhit-H96N of highly reduced hydrolase activity. In cell-based assay PpIX induced HeLa cell death in Fhit and Fhit-H96N-dependent manner which was measured by means of MTT assay. Moreover, HeLa cells stably expressing Fhit or mutant Fhit-H96N were more susceptible to protoporphyrin IX-mediated photodynamic therapy (2J/cm(2)) than parental cells.     

Selective interaction of lower rim calix[4]arene derivatives and bivalent cations in solution. Crystallographic evidence of the versatile behavior of acetonitrile in lead(II) and cadmium(II) complexes

The interaction of lower rim calix(4)arene derivatives containing ester (1) and ketone (2) functional groups and bivalent (alkaline-earth, transition- and heavy-metal) cations has been investigated in various solvents (methanol, N,N-dimethylformamide, acetonitrile, and benzonitrile). Thus, 1H NMR studies in CD3OD, C3D7NO, and CD3CN show that the interaction of these ligands with bivalent cations (Mg2+, Ca2+, Sr2+, Ba2+, Hg2+, Pb2+, Cd2+) is only observed in CD3CN. These findings are corroborated by conductance measurements in these solvents including benzonitrile, where changes upon the addition of the appropriate ligand (1 or 2) to the metal-ion salt only occur in acetonitrile. Thus, in this solvent, plots of molar conductance against the ligand/metal cation ratio reveal the formation of 1:1 complexes between these ligands and bivalent cations. Four metal-ion complex salts resulting from the interaction of 1 and 2 with cadmium and lead, respectively, were isolated and characterized by X-ray crystallography. All four structures show an acetonitrile molecule sitting in the hydrophobic cavity of the ligand. The mode of interaction of the neutral guest in the cadmium(II) complexes differs from each other and from that found in the lead(II) complexes and provides evidence of the versatile behavior of acetonitrile in binding processes involving calix(4)arene derivatives. The thermodynamics of complexation of these ligands and bivalent cations in acetonitrile is reported. Thus, the selective behavior of 1 and 2 for bivalent cations is for the first time demonstrated. The role of acetonitrile in the complexation process in solution is discussed on the basis of 1H NMR and X-ray crystallographic studies. It is suggested that the complexation of 1 and 2 with bivalent cations is likely to involve the ligand-solvent adducts rather than the free ligand. Plots of complexation Gibbs energies against the corresponding data for cation hydration show a selectivity peak which is explained in terms of the predominant role played by cation desolvation and ligand binding energy in complex formation involving metal cations and macrocycles in solution. A similar peak is found in terms of enthalpy suggesting that for most cations (except Mg2+) the selectivity is enthalpically controlled. The ligand effect on the complexation process is quantitatively assessed. Final conclusions are given highlighting the role of the solvent in complexation processes involving calix(4)arene derivatives and metal cations.     

E–mv coupling of vibrational overtone in organic conductors: Relationship to optical nonlinearities and ferroelectricity

A strong electron–phonon coupling effect, referred to as electron–molecular vibration (e–mv) coupling, induces characteristic vibronic signals in the vibrational spectra of organic conductors. This paper discusses a new spectroscopic signal induced by the e–mv coupling effect, and the physical implications of its emergence. This vibronic signal, attributable to an overtone of a molecular vibration, appears with an anti-resonance form in the infrared spectrum of some mixed-valency complexes when the compounds undergo a charge-ordering transition. Based on the results of cluster model calculations, the activation of the overtone signal is interpreted as an indication of the generation of anharmonicity in the electronic potential. This analysis suggests that the series of the complexes should possess potential nonlinear optical abilities, though these compounds have long been viewed as electric conductors having the opposite characteristics of dielectrics that show nonlinear optical properties.     

Nuclear charge radius of 12Be

The nuclear charge radius of (12)Be was precisely determined using the technique of collinear laser spectroscopy on the 2s(1/2)→2p(1/2,3/2) transition in the Be(+) ion. The mean square charge radius increases from (10)Be to (12)Be by δ(10,12)=0.69(5) fm(2) compared to δ(10,11)=0.49(5) fm(2) for the one-neutron halo isotope ^{11}Be. Calculations in the fermionic molecular dynamics approach show a strong sensitivity of the charge radius to the structure of ^{12}Be. The experimental charge radius is consistent with a breakdown of the N=8 shell closure.     

Influence of stationary phase properties on the separation of ionic liquid cations by RP-HPLC

Different types of columns with specific structural properties were used for the separation of mixtures of ionic liquid cations. Two of them were home-made packings and the other two were commercial stationary phases. One of the home-made packings contained cholesterol ligands bonded chemically to silica (SG-CHOL) whereas the other one was a mixed stationary phase (SG-MIX) with cyanopropyl, aminopropyl, phenyl, octyl, and octadecyl ligands. RP-18e Innovation ChromolithTM Performance and Macrosphere 300 C4 packings were also used. A comparison of the separation possibilities offered by these columns for the substances in question revealed significant differences in performance. Packings containing surface-bonded functional groups that are able to undergo protonation are not suitable for separation of such compounds under the given analysis conditions (pH = 4). The best results were obtained for two alkyl stationary phases: butyl and octadecyl. Cluster analysis has also been performed for comparison of the ionic liquid cation properties.     

Vacancy ion-exclusion chromatography of inorganic acids on a weakly acidic cation-exchange resin column

Vacancy ion-exclusion chromatography (VIEC) for inorganic acids such as H(2)SO(4), HCl, H(3)PO(4), HNO(3), HI and HF is tested on a polymethacrylate-based weakly acidic cation-exchange resin column in the H(+)-form. That is, mixture of inorganic acids in the mobile phase is adsorbed to the resin phase passing through the separation column, and each vacant peak induced by injecting water is determined. Retention times are dependent on the degrees of retention for each analyte in the resin phase. In VIEC, well-shaped peaks of inorganic acids are produced, leading to efficient separations. However, retention behaviors of inorganic acids were strongly affected by the concentrations of the acids in the mobile phase. Sulfosalicylic acid was mixed with inorganic acids in the mobile phase prior to the introduction of a separation column in order to obtain the well-resolutions in the lower concentrations of the acids. By using this method, the separations of inorganic acids could be achieved in the range of 0.01-1 mM, and the linear ranges could be extended over two-orders of magnitude. This is considered since the protonated carboxylic groups fixed on the resin phase were increased with increasing the acid concentrations in the mobile phase, and the penetration effects for the acids to the resin phase were thus enhanced. The detection limits (S/N=3) were below 1.0 microM for all analyte acids. Precision values for retention times were below 0.32% and for peak area were below 0.91%.     

Potentiometric titration of hydroxide,aluminate and carbonate in sodium aluminate solutions

An automated potentiometric titration of hydroxide, aluminate and carbonate in sodium aluminate solutions is described. The addition of barium chloride before titration with hydrochloric acid enables the three components to be determined in one run, involving neutralization of hydroxide, protonation of aluminate and dissolution of barium carbonate. The accuracy and precision of the method are satisfactory for a rapid method used for control of aluminum oxide production.     

Novel highly sensitive Cu‐based SERS platforms for biosensing applications

Novel surface enhanced Raman spectroscopy (SERS) platforms have been prepared and used for the bacteria detection. Unlike typical, expensive SERS platforms prepared from gold or silver, the presented platforms are prepared using copper. A new, simple, cost‐efficient and fast high pressure method is used for platform fabrication, through the decomposition of copper hydride. The platform enhancement factors are verified using the malachite green isothiocyanate as a standard. The platforms exhibit extremely high SERS enhancement factors depending on pressure used for their preparation. The calculated enhancement factors have been found in the range between 1.5 × 10⁶ and 4.6 × 10⁷. The SERS spectra reproducibility is established both across a single platform and among different platforms. The average spectral correlation coefficient (Γ) has been calculated to be 0.82. Fully characterized SERS platforms have then been used for detecting Staphylococcus aureus bacteria. These novel platforms have great potential to become excellent tools for biological or medical diagnostics as an alternative to more common silver or gold SERS platforms. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of a Laser Diffraction Method for Determination of Stability of Dispersion Systems in Food and Chemical Industry

Laser diffraction was used for determination of particle size of various emulsions. Mean particle size, fractions' number, and dispersion coefficients of tested systems are presented. Stability of greasing emulsions in relation to their pH was also tested. It was found out that determination of droplet size distribution in fat emulsions allows prediction of their properties (stability). The parameter may be helpful in selection of appropriate production process parameters, composition, and control of marketed emulsion systems during their storage. The purpose of the study was to determine applicability of a laser diffraction method for evaluation of stability of selected dispersion systems in food and chemical industry.