Fatigue Crack Nucleation at Σ3(1 1 2) Boundary in a Ferritic Stainless Steel

The effect of a geometrical relationship between a grain boundary (GB) plane and a tensile axis on intergranular fatigue cracking along 3(1 1 2) twin boundaries has been investigated in Fe-30%Cr alloy crystals. Fatigue experiments were carried out on the three kinds of the specimens containing the 3(1 1 2) twin boundary. It was found that the fatigue cracking behavior was sensitive to the geometry of the GB plane. In a specimen where both the GB plane and a slip vector lying in the GB plane in adjacent grains are inclined to the tensile axis at 45°, the fatigue cracks were nucleated preferentially along the twin boundary at a stress amplitude of 170 MPa. The specimen with the GB plane normal to the tensile axis showed that the fatigue crack was initiated from a slip band formed within a constituent grain at a stress amplitude of 300 MPa. When the GB plane was inclined to the tensile axis but the slip vector lying in the GB plane was normal to the tensile axis, development of additional slips formed perpendicular to the GB plane were observed at a specific site of the GB. Initiation of intergranular fatigue cracks at the site was recognized at a stress amplitude of 250 MPa. It can be suggested that the GB plane normal to the tensile axis provides the highest fatigue performance among them. The difference in the cracking property among these specimens could be understood in terms of the effective Schmid factor derived from elastically incompatible stress.     

The effect of oxygen vacancy on the oxide ion mobility in LaAlO3-based oxides

The electrical property of (La_1−xSr_x)_1−z(Al_1−yMg_y)O_3−δ (LSAM; x≤0.3, y≤0.15 and z≤0.1) was measured using the DC four-probe method as a function of temperature (500–1000°C) and oxygen partial pressure (1–10⁻²² atm). Among LSAMs, (La_0.9Sr_0.1)AlO_3−δ showed the highest ionic conductivity, σ_i=1.3×10⁻² S cm⁻¹ at 900°C. A simultaneous substitution at A and B sites or A site deficiency is expected to create larger oxygen vacancy and higher ionic conductivity. However, it showed a negative effect. The effect of the vacancy increase did not effect monotonously the ionic conductivity. It was found that the concentration of oxygen vacancy, [V_O], influences not only the oxide ion conductivity, σ_i, but also the mobility, μ_v, of [V_O]. These properties exhibit a maximum at around [V_O]=0.05. With the increase in [V_O], the activation energy, E_a, of the ionic conduction dropped from 1.8 to ca. 1.0 eV at [V_O]=0.05 and became almost constant at [V_O]>0.05. The dependency of the pre-exponential term, μ⁰_v, and E_a on [V_O] was analyzed and their effect on μ_v and σ_i was discussed with respect to crystal structure and defect association. It was estimated that the crystal structure mainly governs these properties. The effect of defect association could not be ignored but is considered to be a complicated correlation.     

Microstructure, microhardness, composition, and corrosive properties of stainless steel 304 I. Laser surface alloying with silicon by beam-oscillating method.

Laser surface alloying (LSA) with silicon was conducted on austenitic stainless steel 304. Silicon slurry composed of silicon particle of 5 μm in average diameter was made and a uniform layer was supplied on the substrate stainless steel. The surface was melted with beam-oscillated carbon dioxide laser and then LSA layers of 0.4–1.2 mm in thickness were obtained. When an impinged energy density was adjusted to be equal to or lower than 100 W mm⁻², LSA layers retained rapidly solidified microstructure with dispersed cracks. In these samples, Fe₃Si was detected and the concentration of Si in LSA layer was estimated to be 10.5 wt.% maximum. When the energy density was equal to or greater than 147 W mm⁻², cellular grained structure with no crack was formed. No iron silicate was observed and alpha iron content in LSA layers increased. Si concentration within LSA layers was estimated to be 5 to 9 wt.% on average. Crack-free as-deposited samples exhibited no distinct corrosion resistance. The segregation of Si was confirmed along the grain boundaries and inside the grains. The microstructure of these samples changed with solution-annealing and the corrosion resistance was fairly improved with the time period of solution-annealing. Received: 2 September 1999 / Accepted: 6 September 1999 / Published online: 1 March 2000     

Landau levels in a novel two-dimensional electron system interacting with charged quantum dots

Landau levels have been theoretically investigated in a two-dimensional electron gas near a quantum dot (QD) layer. By a diagrammatical method, we have formulated the self-energy for the Landau level and deduced its relation to the AC conductivity σ_loc(ω) in the QD layer. As an example, we have examined the density of states in the case where σ_loc(ω) is described by Aω^S(S=0.8). It is found that the Landau levels are broadened due to the interaction with the localized electrons in the QDs.     

Widely tunable terahertz-wave generation using an N-benzyl-2-methyl-4-nitroaniline crystal

Widely tunable terahertz (THz)-wave generation using difference frequency generation (DFG) in an organic N-benzyl-2-methyl-4-nitroaniline (BNA) crystal was demonstrated. To our knowledge, this is the first report of THz-wave generation by BNA DFG. Large, high-quality single crystals of BNA (phi 8 mm x 30 mm) were grown using the vertical Bridgman method. The nonlinear optical (NLO) coefficient d(33) of the BNA crystal is approximately 234 pm/V, which is the largest value reported for any yellow NLO material. The collinear phase-matching condition of the type-0 configuration is satisfied using a 0.7-1 microm band pump wavelength. We generated THz waves using an organic BNA crystal; the generation range is 0.1-15 THz.     

Reactions of a Silylyne Complex with Aldehydes: Formation of W−Si−O−C Four-Membered Metallacycles and Their Metathesis-Like Fragmentation

A tungsten silylyne complex having a W≡Si triple bond reacted with two molecules of aldehydes at room temperature to give W−Si−O−C four-membered metallacycles by [2+2] cycloaddition and subsequent formyl hydrogen transfer from one aldehyde molecule to another. Upon heating to 70 °C, the four-membered metallacycles underwent metathesis-like fragmentation cleanly to afford carbyne complexes and “silanoic esters,” in a manner similar to that of metallacyclobutadiene, an intermediate of alkyne metathesis reactions, and dimerization of the latter products gave 1,3-cyclodisiloxanes. The “silanoic ester” was also trapped by pivalaldehyde to give a [2+2] cycloaddition product in high yield.     

Star-Shaped Ruthenium Complexes as Prototypes of Molecular Gears

The design and synthesis of two families of molecular-gear prototypes is reported, with the aim of assembling them into trains of gears on a surface and ultimately achieving controlled intermolecular gearing motion. These piano-stool ruthenium complexes incorporate a hydrotris(indazolyl)borate moiety as tripodal rotation axle and a pentaarylcyclopentadienyl ligand as star-shaped cogwheel, equipped with five teeth ranging from pseudo-1D aryl groups to large planar 2D paddles. A divergent synthetic approach was followed, starting from a pentakis(p-bromophenyl)cyclopentadienyl ruthenium(II) complex as key precursor or from its iodinated counterpart, obtained by copper-catalyzed aromatic Br/I exchange. Subsequent fivefold cross-coupling reactions with various partners allowed high structural diversity to be reached and yielded molecular-gear prototypes with aryl-, carbazole-, BODIPY- and porphyrin-derived teeth of increasing size and length.     

Shimalactone Biosynthesis Involves Spontaneous Double Bicyclo-Ring Formation with 8π-6π Electrocyclization

Shimalactones A and B are neuritogenic polyketides possessing characteristic oxabicyclo[2.2.1]heptane and bicyclo[4.2.0]octadiene ring systems that are produced by the marine fungus Emericella variecolor GF10. We identified a candidate biosynthetic gene cluster and conducted heterologous expression analysis. Expression of ShmA polyketide synthase in Aspergillus oryzae resulted in the production of preshimalactone. Aspergillus oryzae and Saccharomyces cerevisiae transformants expressing ShmA and ShmB produced shimalactones A and B, thus suggesting that the double bicyclo-ring formation reactions proceed non-enzymatically from preshimalactone epoxide. DFT calculations strongly support the idea that oxabicyclo-ring formation and 8π-6π electrocyclization proceed spontaneously after opening of the preshimalactone epoxide ring through protonation. We confirmed the formation of preshimalactone epoxide in vitro, followed by its non-enzymatic conversion to shimalactones in the dark.     

Numerical Verification Methods for Solutions of the Free Boundary Problem

We propose two methods to enclose the solution of an ordinary free boundary problem. The problem is reformulated as a nonlinear boundary value problem on a fixed interval including an unknown parameter. By appropriately setting a functional space that depends on the finite element approximation, the solution is represented as a fixed point of a compact map. Then, by using the finite element projection with constructive error estimates, a Newton-type verification procedure is derived. In addition, numerical examples confirming the effectiveness of current methods are given.