Improvement of culture conditions forl-proline production by a recombinant strain ofSerratia marcescens

Serratia marcescens SP511 was previously reported to be anl-proline-producing strain that harbors a recombinant plasmid carrying the mutant type of the proline operon. This strain produced 65 g/L ofl-proline in a medium containing 22% sucrose and urea after 5 d of incubation under the conventional culture conditions. We searched for more suitable culture conditions for more abundantl-proline production by SP511. To improve the supply of a nitrogen source to cells, ammonium was used instead of urea and fed to a culture under control of the pH of the medium. The concentrations of MgSO₄ and K₂HPO₄ were increased, and in addition, sucrose was continuously added to the culture at a final concentration of 32%. Under these conditions, the cell amount was increased twofold over that under the previous conditions andl-proline production reached a maximum of more than 100 g/L after 4 d of incubation.     

Polymerization of (o-methylphenyl)acetylene and polymer characterization

(o-Methylphenyl)acetylene polymerized with high yields in the presence of W and Mo catalysts. W catalysts were more active than the corresponding Mo catalysts. The weight-average molecular weight of the polymer formed with W(CO)₆–CCl₄–hv reached 8 × 10⁵, being higher than the maximum value (ca. 2 × 10⁵) for poly(phenylacetylene). The polymer had the structure $\rlap{--} [{\rm CH} \hbox{=\hskip-1pt=} {\rm C}(o - {\rm CH}_3 {\rm C}_6 {\rm H}_4 )\rlap{--} ]_n $. The stereochemical structure of the main chain could be determined by ¹³C-NMR; the cis content varied in a range of 41–61% depending on the polymerization conditions. The present polymer was thermally more stable than poly(phenylacetylene) according to thermogravimetric analysis. Interestingly, this polymer possessed deeper color than poly(phenylacetylene), and showed a fairly strong absorption in the visible region.     

Standard molar enthalpy of formation of CH<Subscript>3</Subscript>(CH<Subscript>3</Subscript>SCH<Subscript>2</Subscript>)SO,methyl methylthiomethyl sulfoxide

Summary The standard molar enthalpy of formation of methyl methylthiomethyl sulfoxide, CH₃(CH₃SCH₂)SO, at T=298.15 K in the liquid state was determined to be -199.4±1.5 kJ mol^-1 by means of oxygen rotating-bomb combustion calorimetry.     

Structures of 1,4-benzodioxane derivatives from the seeds of Phytolacca americana and their neuritogenic activity in primary cultured rat cortical neurons

The methanol extract of the seeds of Phytolacca americana was reinvestigated to yield three new 1,4-benzodioxane-type compounds, americanoic acid methyl ester (1), isoamericanoic acid A methyl ester (2), and 9'-O-methylamericanol A (3) along with the previously isolated neolignans 6-9. The structures of 1-3 were characterized by 2D NMR and long-range selective proton-decoupling (LSPD) techniques. The neuritogenic effects of compounds 1-3, and dicarboxilic acids 4 and 5, which had been previously synthesized with horseradish peroxidase-catalyzed oxidative coupling of caffeic acid, were examined in primary cultured rat cortical neurons. Americanoic acid A methyl ester (1) exhibited neurite outgrowth-promoting activity at concentration of 0.01-1.0 microM, whereas dicarboxilic acids 4 and 5 were found to induce neuritogenesis dose dependently at the concentrations from 0.1 microM to 10 microM.     

The application of multivariate analysis to the radioallergosorbent test (RAST)

Multivariate statistical analyses using principal component analyses (PCA) and Mahalanobis' method were applied to the quality control of radioallergosorbent test (RAST). Mites and foods allergen were analyzed by PCA method, and foods allergen were analyzed by Mahalanobis' method. The vast differences in the distribution on titers among the mites and the foods were observed. To evaluate the results of a test and the quality of kits for test statistically, it should be better to use multivariate analyses such as PCA or Mahalanobis' method.     

Direct and quantitative monitoring of catalytic organic reactions under heterogeneous conditions using direct analysis in real time mass spectrometry

This new method overcomes problems of conventional analytical methodologies such as light scattering and sampling reproducibility issues. We used this method for mechanistic studies of catalytic reactions under heterogeneous conditions. Direct-type hydroxymethylation reactions and Mukaiyama-type hydroxymethylation reactions both catalyzed by a scandium–bipyridine ligand complex under micellar conditions were employed as examples of heterogeneous reactions. For direct-type hydroxymethylation reactions, initial reaction rate assays revealed first-order dependency on both substrate and catalyst. On the other hand, Mukaiyama-type hydroxymethylation reactions showed first-order rate dependency on substrate, zero-order on catalyst and saturation kinetics on formaldehyde.

A direct and quantitative method for monitoring heterogeneous organic reactions has been developed by using direct analysis in real time mass spectrometry (DART-MS) with an isotope-labeled reaction product as an internal standard.     

Development of a chemical vapor sensor using piezoelectric quartz crystals with coated unusual lipids

Piezoelectric quartz crystal sensors were developed using lipids with various properties for highly sensitive detection of chemical vapors. Lipids with varying lengths of alkyl chains were coated onto 10 MHz AT-cut quartz crystal resonators and the response of these modified crystals to chemical vapors were measured. It was shown that hydrophilic compounds, such as ethanol and methanol, could be recognized efficiently by lipids having shorter alkyl chains, whereas lipids with longer alkyl chains showed affinity to more hydrophobic vapors, such as toluene, hexane and cyclohexane. Frequency changes caused by adsorption of alcohols could be enhanced when cholesterol was co-immobilized in the lipid layer. To confirm the assumption that the sensor-response might be affected by the properties of lipids derived from acyl chains, we have examined the effects of two types of newly synthesized unusual lipids on sensor response. When lipids having one triple bond each at different positions on their alkyl chains were coated onto quartz crystals separately, lower responses were observed compared to responses obtained for a sensor with immobilized, saturated phosphatidylcholine. Lipids containing -branched acyl chains, however, showed good affinity for organic vapors, and sensor responses improved 4–5-fold. Moreover, these sensors were shown to have sensitivity of the same order as the humans' sense of smell (10⁻⁵–10⁻⁶ w/w in liquid paraffin) when measured using standard odorants (isovaleric acid, skatole, etc.) for an olfactometry established in Japan.     

Self-assembly patterning of silica colloidal crystals

We developed a self-assembly process of silica particles to fabricate desired patterns of colloidal crystals having high feature edge acuity and high regularity. A micropattern of colloidal methanol prepared on a self-assembled monolayer in hexane was used as a mold for particle patterning, and slow dissolution of methanol into hexane caused shrinkage of molds to form micropatterns of close-packed SiO2 particle assemblies. This result is a step toward the realization ofnano/micro periodic structures for next-generation photonic devices by a self-assembly process.     

Molecular structure of glucopyranosylamide lipid and nanotube morphology

A series of glucopyranosylamide lipids, N-(X-octadecenoyl)-beta-D-glucopyranosylamine [X = 13-cis (1), 11-cis (2), 9-cis (3), 6-cis (4), and 9-cis,12-cis (5)] and their saturated homologue N-octadecanoyl-beta-d-glucopyranosylamine (6), which differ in the position of a cis double bond in the C18 hydrocarbon chains, have been synthesized. The effect of the cis double bond position on the chiral self-assembly of each glycolipid has been examined by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV, and circular dichroism (CD). The 11-cis derivative 2 was observed to self-assemble in water to form a uniform hollow cylinder structure with about 200-nm outer diameters in >98% yields. The obtained nanotubes from 2 showed the narrowest distribution of outer diameters and also gave a negative CD band around 234-236 nm, showing the largest CD intensity among the glycolipids investigated. Thus, we found that the position of a cis double bond significantly influences the homogeneity of the outer diameters as well as growth behavior of the self-assembled nanotube structures. Chiral molecular packing driven by a possible bending structure of the unsaturated glycolipids is playing a critical role in determining tubular morphology through molecular self-assembly.     

Application of microcalorimetry to the formulation study

Isothermal microcalorimetry was used to evaluate excipient compatibility of solid dosage form. Oxybutynin hydrochloride and cefaclor were used as model drugs for compatibility test with excipients. The calorimetric data for compatibility test were compared with those of HPLC data. Evaluation of compatibility between drug and excipient of solid dosage form might be possible to use isothermal microcalorimetry instead of conventional method. By using microcalorimetric method, the evaluation of the compatibility between drug and excipient could be successfully performed with a simple operation in a short time. The application of the isothermal microcalorimetry would be useful for the screening test of the drug compatibility with excipients.