Radiation-induced emission from golden hamster embryo cells

Emission from high-energy-electron-irradiated golden hamster embryo (GHE) cells has been studied over the temperature range 12–300 K both by a one-shot-single-photon-counting method and by photocurrent measurements with an oscilloscope. Emission from the irradiated phosphate buffered saline (PBS) also has been studied. The emission spectra from PBS at 12 and 77 K show a maximum around 330 and 380 nm, respectively, which are the same spectra as those from irradiated pure H₂O. The emission from irradiated GHE consists of the new band at 480 nm in addition to the emission from H₂O. The 480 nm emission is observed at the temperature range of 12–300 K, though the emission at 300 K is much lower than that at low temperature. The 480 nm emission is ascribed to the transition from excited organic substances in GHE cells. The intensity of 480 nm emission at 300 K increases linearly with increasing irradiation-dose in the range of 11–600 Gy.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.     

Protonation-induced structural change of lyotropic liquid crystals in oley- and alkyldimethylamine oxides/water systems

Lyotropic phase behavior of the nonionic and the half-ionized oleyldimethylamine oxide (OlDMAO)/water systems was investigated using polarized light microscopy, small-angle X-ray diffraction, and differential scanning calorimetry. Nonionic OlDMAO formed isotropic micellar solution, nematic, hexagonal, cubic, and lamellar liquid crystalline phases as the surfactant concentration increased. In contrast, half-ionized OlDMAO (i.e., 1:1 mixture of the nonionic and the protonated species) had a greater tendency to form bilayer structures, and the phase diagram became quite similar to those of double-chained ionic surfactants rather than single-chained ones, despite the introduction of positive charges to the nonionic one. The preference of the bilayer structures in the half-ionized OlDMAO was interpreted in terms of the dimers stabilized by the hydrogen bond between the nonionic and protonated species. For alkyldimethylamine oxides with a saturated hydrocarbon chain (CnDMAO, chain length: n = 14, 16, and 18), the phase sequence of lyotropic liquid crystals was hardly affected by the protonation, but an elongation of the cylinders of the hexagonal phase was observed for the half-ionized C14DMAO. Consequently, it can be considered that the dominant bilayer formation of the half-ionized OlDMAO is attributed to the combined effect of the hydrogen-bonded dimer formation and the cis-double-bond configuration of the alkyl chain.     

Multitracer study on permeation of rare earth elements through a supported liquid membrane

Separation by means of supported liquid membranes is a useful method for the preparation and preconcentration of radioactive nuclides. The permeation of rare earth elements through a bis(2-ethylhexyl) hydrogen phosphate-decalin membrane supported on a microporous polytetrafluoroethylene sheet was studied using a multitracer containing radioactive nuclides of Sc, Zr, Nb, Hf, Ce, Pm, Gd, Yb, and Lu. Permeation rates of these elements from feed solutions of various acidity to receiving solutions of 0.5 mol·dm⁻³ HCl were determined simultaneously. The feed solution at pH 1.4 gave the highest permeation rate for Ce, Pm, and Gd, amounting to about 95% of permeation for Ce and Pm, 80% for Gd, and 10% for Yb in 21 h. Scandium, Zr, Nb, Hf, and Lu were not transported at all from the feed solution. Permeation rates of Yb and Lu from the feed solution at pH 1.4 to receiving solutions of 0.75, 1.0, 2.3, and 4.0 mol·dm⁻³ HCl increased with the concentration. The results obtained indicate that the light rare earth elements can be separated from the heavy ones by this method.     

Acylation of hydrazides with acetic acid and formic acid

In peptide synthesis, hydrazides are important intermediates for the azide coupling method. A hydrazide is converted to the corresponding azide in the presence of an acid and a nitrite. When acetic acid (or formic acid) is used as the acid, partial acetylation (or formylation) of the hydrazide occurs as a side reaction. Formylation of the hydrazide is much faster than acetylation. Removal of the formyl group on the hydrazide with hydrazine and hydroxylamine was studied. The rate of deformylation with hydrazine treatment is faster than that with hydroxylamine treatment.     

Chiral amplification in macromolecular helicity assisted by noncovalent interaction with achiral amines and memory of the helical chirality

Poly[(4-carboxyphenyl)acetylene] (poly-1) exhibits an intense induced circular dichroism (ICD) in the UV-visible region upon complexation with excess (R)-1-(1-naphthyl)ethylamine ((R)-2), owing to the formation of a predominantly single-handed helical conformation of the polymer backbone. In the presence of a small amount of (R)-2, poly-1 showed a very weak ICD due to the lack of a single-handed helical conformation. However, we have found that the co-addition of the excess bulky, achiral 1-naphthylmethylamine (5) with a small amount of (R)-2 caused a dramatic increase in the ICD magnitude, comparable to the full ICD induced by excess (R)-2. This indicates that an almost single-handed helix can be induced on poly-1 upon complexation with a small amount of (R)-2 assisted by achiral 5. Furthermore, the induced single-handed helical poly-1 could be successfully memorized by the replacement of (R)-2 and 5 with achiral 2-aminoethanol or n-butylamine.     

Cidep study of radical-ion pair systems: Photooxidation reactions of carbazoles by maleic anhydride in alcohol solution

Photooxidation (charge transfer) reactions of carbazole derivatives by maleic anhydride (MA) in alcoholic media are studied by a time-resolved cw-ESR (TRESR) and Fourier transform ESR (FTESR) techniques. The CIDEP spectra observed in the systems (methyl-, ethyl-, and phenyl-substituted carbazoles with MA) remarkably depend on the MA concentration. Under the high concentration conditions, an emissive TM (triplet mechanism) polarization with a slight A/E (absorption/emission) pattern of the RPM (radical pair mechanism) is observed. In the low concentration of MA, a TM-like absorptive polarization is superimposed on the A/E pattern of the RPM. Since this reaction takes place exclusively through the triplet state, this spectral phase reveals that the singlet state of the radical-ion pair (RIP) has an energy higher than that of the triplet state, in other words, the sign of the apparent exchange interaction of the present RIP systems is positive. The total absorptive polarization observed in the low concentration of MA is tentatively explained by the polarization transfer from the excited triplet state of carbazoles in thermal equilibrium.     

Electrophoretic mobility of the polymer-like micelles of tetradecyldimethylamine oxide hemihydrochloride

Effects of the surfactant concentration C_d and the NaCl concentration C_s on the electrophoretic mobilities U of the well-characterized polymer-like micelles have been investigated by the electrophoretic light scattering, using tetradecyldimethylamine oxide hemihydrochloride (C14DMAO·1/2HCl). At the high ionic strength of 0.1 mol kg⁻¹ NaCl, the electrophoretic mobilities were independent of C_d (5 mM < C_d < 100 mM), despite the concentration-dependent micelle growth of the polymer-like micelles. This suggests that the electrophoretic mobility of the polymer-like micelle at high ionic strengths is independent of the contour length (i.e., the molecular weight), as found on linear polyelectrolytes. Somewhat surprisingly, the entanglements of the polymer-like micelles gave small effect on the electrophoretic mobilities in the examined range of the surfactant concentration above an overlap concentration. The mobilities of the polymer-like micelle decreased with √C_s in a single exponential manner in the range of C_s from 0.02 to 0.3 mol kg⁻¹. It is suggested that the cylinder model can be applied to the electrophoretic mobilities of the polymer-like micelles at high ionic strengths (i.e. a free-draining behavior), since the persistence length of the polymer-like micelle (20 nm) is much larger than the Debye length at high ionic strength.     

Preparative two-dimensional gel electrophoresis with agarose gels in the first dimension for high molecular mass proteins

A two-dimensional gel electrophoresis (2-DE) method that uses an agarose isoelectric focusing (IEF) gel in the first dimension (agarose 2-DE) was compared with an immobilized pH gradient 2-DE method (IPG-Dalt). The former method was shown to produce significant improvements in the 2-D electrophoretic separation of high molecular mass proteins larger than 150 kDa, up to 500 kDa, and to have a higher loading capacity, as much as 1.5 mg proteins in total for micropreparative runs. The extraction medium found best in this study for agarose 2-DE of mammal tissues was 6 M urea, 1 M thiourea, 0.5% 2-mercaptoethanol, protease inhibitor cocktail (Complete Mini EDTA-free), 1% Triton X-100 and 3% 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate (CHAPS). Trichloroacetic acid (TCA) treatment of the agarose gel after IEF is to be carefully weighed beforehand, because some high molecular mass proteins were less likely to enter the second-dimensional polyacrylamide gel after TCA fixation, and proteins such as mouse skeletal muscle actin gave pseudospots in the agarose 2-DE patterns without TCA fixation. As a good compromise we suggest fixation of proteins in the agarose gel with TCA for one hour or less. The first-dimensional agarose IEF gel containing Pharmalyte as a carrier ampholyte was 180 mm in length and 2.5-4.8 mm in diameter. The gel diameter was shown to determine the loading capacity of the agarose 2-DE, and 1.5 mg liver proteins in total were successfully separated by the use of a 4.8 mm diameter agarose gel.