Monocyclometalated (C N) Gold(III) Metallacycles: Tunable Emission and Singlet Oxygen (1O2) Generation Properties

The synthesis, characterization and photoluminescent properties of four cyclometalated (C N)-type gold(III) complexes bearing a bidentate diacetylide ligand, tolan-2,2’-diacetylide (tda), are reported. The complexes exhibit highly tunable excited state properties and show photoluminescence (PL) across the entire visible spectrum from sky-blue (λ_PL=493 nm) to red (λ_PL=675 nm) with absolute PL quantum yields (PLQY) of up to 75 % in solution, the highest PLQY found for any monocyclometalated Au(III) complex in solution. As a consequence of the use of the strongly rigidifying diacetylide bidentate ligand, a significant increase in the excited state lifetimes (τ₀=16–258 μs) was found in solution and in thin films. The complexes showed remarkable singlet oxygen generation in aerated solution with absolute singlet oxygen quantum yield (ϕ^1Δ) values reaching up to 7.5×10⁻⁵ and singlet oxygen lifetimes (τ₀^1Δ) in the range of 66–95 μs. Furthermore, the radiative and non-radiative rates of singlet oxygen were determined using the ϕ^1Δ and τ₀^1Δ values and correlations are drawn between the formation of singlet oxygen and its interaction with cyclometalated (C N) gold(III) complexes.     

Generation and coupling of [Mn(dmpe)2(C triple bond CR)(C triple bond C)]* radicals producing redox-active C4-bridged rigid-rod complexes

The symmetric d(5) trans-bis-alkynyl complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(2)] (R = Me, 1 a; Et, 1 b; Ph, 1 c) (dmpe = 1,2-bis(dimethylphosphino)ethane) have been prepared by the reaction of [Mn(dmpe)(2)Br(2)] with two equivalents of the corresponding acetylide LiC triple bond CSiR(3). The reactions of species 1 with [Cp(2)Fe][PF(6)] yield the corresponding d(4) complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(2)][PF(6)] (R = Me, 2 a; Et, 2 b; Ph, 2 c). These complexes react with NBu(4)F (TBAF) at -10 degrees C to give the desilylated parent acetylide compound [Mn(dmpe)(2)(C triple bond CH)(2)][PF(6)] (6), which is stable only in solution at below 0 degrees C. The asymmetrically substituted trans-bis-alkynyl complexes [Mn(dmpe)(2)(C triple bond CSiR(3))(C triple bond CH)][PF(6)] (R = Me, 7 a; Et, 7 b) related to 6 have been prepared by the reaction of the vinylidene compounds [Mn(dmpe)(2)(C triple bond CSiR(3))(C=CH(2))] (R = Me, 5 a; Et, 5 b) with two equivalents of [Cp(2)Fe][PF(6)] and one equivalent of quinuclidine. The conversion of [Mn(C(5)H(4)Me)(dmpe)I] with Me(3)SiC triple bond CSnMe(3) and dmpe afforded the trans-iodide-alkynyl d(5) complex [Mn(dmpe)(2)(C triple bond CSiMe(3))I] (9). Complex 9 proved to be unstable with regard to ligand disproportionation reactions and could therefore not be oxidized to a unique Mn(III) product, which prevented its further use in acetylide coupling reactions. Compounds 2 react at room temperature with one equivalent of TBAF to form the mixed-valent species [[Mn(dmpe)(2)(C triple bond CH)](2)(micro-C(4))][PF(6)] (11) by C-C coupling of [Mn(dmpe)(2)(C triple bond CH)(C triple bond C*)] radicals generated by deprotonation of 6. In a similar way, the mixed-valent complex [[Mn(dmpe)(2)(C triple bond CSiMe(3))](2)(micro-C(4))][PF(6)] [12](+) is obtained by the reaction of 7 a with one equivalent of DBU (1,8-diazabicyclo[5.4.0]undec-7-ene). The relatively long-lived radical intermediate [Mn(dmpe)(2)(C triple bond CH)(C triple bond C*)] could be trapped as the Mn(I) complex [Mn(dmpe)(2)(C triple bond CH)(triple bond C-CO(2))] (14) by addition of an excess of TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) to the reaction mixtures of species 2 and TBAF. The neutral dinuclear Mn(II)/Mn(II) compounds [[Mn(dmpe)(2)(C triple bond CR(3))](2)(micro-C(4))] (R = H, 11; R = SiMe(3), 12) are produced by the reduction of [11](+) and [12](+), respectively, with [FeCp(C(6)Me(6))]. [11](+) and [12](+) can also be oxidized with [Cp(2)Fe][PF(6)] to produce the dicationic Mn(III)/Mn(III) species [[Mn(dmpe)(2)(C triple bond CR(3))](2)(micro-C(4))][PF(6)](2) (R = H, [11](2+); R = SiMe(3), [12](2+)). Both redox processes are fully reversible. The dinuclear compounds have been characterized by NMR, IR, UV/Vis, and Raman spectroscopies, CV, and magnetic susceptibilities, as well as elemental analyses. X-ray diffraction studies have been performed on complexes 4 b, 7 b, 9, [12](+), [12](2+), and 14.     

Facile access to redox-active C2-bridged complexes with half-sandwich manganese end groups

The dinuclear mixed-valent complex [(MeC5H4)(dmpe)MnC(2)Mn(dmpe)(C5H4Me)](+)[(eta2-MeC5H4)3Mn](-)[1](+)[2]- (dmpe=1,2-bis(dimethylphosphanyl)ethane) was prepared by the reaction of [Mn(MeC5H4)2] with dmpe and Me(3)SnC[triple chemical bond]CSnMe3. The reactions of [1](+)[2]- with K[PF6] and Na[BPh4] yielded the corresponding anion metathesis products [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][PF6] ([1][PF6]) and [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][BPh4] ([1][BPh4]). These mixed-valent species can be reduced to the neutral form by reaction with Na/Hg. The obtained complex [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)] (1) displays a triplet/singlet spin equilibrium in solution and in the solid state, which was additionally studied by DFT calculations. The diamagnetic dicationic species [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][PF6]2 ([1][PF6]2) was obtained by oxidizing the mixed-valent complex [1][PF6] with one equivalent of [Fe(C5H5)2][PF6]. Both redox processes are fully reversible. The dinuclear compounds were characterized by NMR, IR, UV-visible, and Raman spectroscopy, cyclic voltammetry, and magnetic susceptibility measurements. X-ray diffraction studies were performed on [1][2], [1][PF6], [1][BPh4], and [1][PF6]2.     

Dark-field oxidative addition-based chemosensing: new bis-cyclometalated PtII complexes and phosphorescent detection of cyanogen halides

Heavy metal complexes that are phosphorescent at room temperature are becoming increasingly important in materials chemistry, principally due to their use in phosphorescent organic light-emitting devices (OLEDs). Their use in optical sensory schemes, however, has not been heavily explored. Homoleptic bis-cyclometalated Pt(II) complexes are known to undergo oxidative addition with appropriate electrophiles (principally alkyl halides) by either thermal or photochemical activation. We have applied this general reaction scheme to the development of a phosphorescence-based sensing system for cyanogen halides. To carry out structure-property relationship studies, a series of previously unreported Pt(II) complexes was prepared. Most of the complexes (excluding those that incorporated substituents on the ligands that forced steric crowding in the square plane) were strongly orange-red phosphorescent (Phi = 0.2-0.3) in a room-temperature oxygen-free solution. These sterically demanding ligands also accelerated the addition of cyanogen bromide to these complexes but slowed the addition of methyl iodide, indicating that the oxidative addition mechanisms for these two electrophiles is different. The lack of solvent-polarity effect on the addition of BrCN suggests a radical mechanism. Oxidative addition of BrCN to the metal complexes in solution or dispersed in poly(methyl methacrylate) gave blue-shifted emissive Pt(IV) complexes. The blue-shifted products give a dark-field sensing scheme that is in sharp contrast to energy transfer-based sensing schemes, which have limited signal-to-noise because of the presence of lower-energy vibronic bands of the energy donor that can overlap with the emission of the acceptor.     

Distinct Proton and Water Reduction Behavior with a Cobalt(III) Electrocatalyst Based on Pentadentate Oximes

A new pentadentate oxime has been designed to drive the preferential coordination favored by Co^I in catalysts used for proton/water reduction. The ligand incorporates water upon metal coordination and is water soluble. This Co^III species is doubly reduced to Co^I and exhibits H⁺ reduction activity in the presence of weak acids in MeCN and evolves H₂ upon protonation suggesting that the ligand design increases catalyst effectiveness. Superior catalysis is observed in water with a turnover number (TON) of 5700 over 18 h. However, the catalyst yields Co‐based nanoparticles, indicating that the solvent media may dictate the nature of the catalyst.     

New Routes to a Series of σ‐Borane/Borate Complexes of Molybdenum and Ruthenium

A series of agostic σ‐borane/borate complexes have been synthesized and structurally characterized from simple borane adducts. A room‐temperature reaction of [Cp*Mo(CO)₃Me], 1 with Li[BH₃(EPh)] (Cp*=pentamethylcyclopentadienyl, E=S, Se, Te) yielded hydroborate complexes [Cp*Mo(CO)₂(μ‐H)BH₂EPh] in good yields. With 2‐mercapto‐benzothiazole, an N,S‐carbene‐anchored σ‐borate complex [Cp*Mo(CO)₂BH₃(1‐benzothiazol‐2‐ylidene)] ( 5 ) was isolated. Further, a transmetalation of the B‐agostic ruthenium complex [Cp*Ru(μ‐H)BHL₂] ( 6 , L=C₇H₄NS₂) with [Mn₂(CO)₁₀] affords a new B‐agostic complex, [Mn(CO)₃(μ‐H)BHL₂] ( 7 ) with the same structural motif in which the central metal is replaced by an isolobal and isoelectronic [Mn(CO)₃] unit. Natural‐bond‐orbital analyses of 5–7 indicate significant delocalization of the electron density from the filled σ_B?H orbital to the vacant metal orbital.     

Reactivity of Diruthenium and Dirhodium Analogues of Pentaborane(9): Agostic versus Boratrane Complexes

A series of novel Cp*‐based (Cp*=η⁵‐C₅Me₅) agostic, bis(σ‐borate), and boratrane complexes have been synthesized from diruthenium and dirhodium analogues of pentaborane(9). The synthesis and structural characterization of the first neutral ruthenadiborane(6) analogue are also reported. This new route offers a very efficient method for the isolation of bis(σ‐borate) and agostic complexes from diruthenapentaborane(9).     

Improved Synthesis of Cyclic α-Hydrazino Acids of Five- to Nine-Membered Rings and Optical Resolution of 5,6,7-Membered Ring Hydrazino Acids

Synthesis of cyclic α-hydrazino acids of five- to nine-membered rings has been described. Di-tert-butyl or dibenzyl malonate was used as starting materials instead of diethyl malonate, which was used in our first report. Deprotection of tert-butyl or benzyl ester of the final compounds was much easier than that of ethyl or methyl esters. Overall yield of these acids were 39, 50, 47, 52, and 51%, respectively. These acids were then converted to the diastereomers either via the formation of peptides with L-phenylalanine methyl ester or via the formation of esters (for five- to seven-membered rings) with L-2-phenylalaninol. All diastereomers were separated except the nine-membered ring by flash chromatography. Hydrolysis of diastereomeric esters generated the optically pure five-, six- and seven-membered cyclic α-hydrazino acids. In this process, both the enantiomers have been isolated and the chiral auxiliary L-2-phenylalaninol was recovered. Absolute stereochemistry was determined from x-ray crystallographic analysis.     

A highly selective fluorescent chemosensor for zinc ion and imaging application in living cells

A new 2,6-bis(5,6-dihydrobenzo[4,5]imidazo[1,2-c]quinazolin-6-yl)-4-methylphenol (1) serves as a highly selective and sensitive fluorescent probe for Zn(2+) in a HEPES buffer (50 mM, DMSO:water = 1:9 (v/v), pH = 7.2) at 25 °C. The increase in fluorescence in the presence of Zn(2+) is accounted for by the formation of dinuclear Zn(2+) complex [Zn(2)(C(35)H(25)N(6)O)(OH)(NO(3))(2)(H(2)O)] (2), characterized by X-ray crystallography. The fluorescence quantum yield of the chemosensor 1 is only 0.019, and it increases more than 12-fold (0.237) in the presence of 2 equiv of the zinc ion. Interestingly, the introduction of other metal ions causes the fluorescence intensity to be either unchanged or weakened. By incubation of cultured living cells (A375 and HT-29) with the chemosensor 1, intracellular Zn(2+) concentrations could be monitored through selective fluorescence chemosensing.     

Catalytic Deactivation and Regeneration of Nickel Microparticles in a Home-Built Microchannel-Coupled Millireactor: Substrate Specificity and Multiphase Flow Dependency

Substrate-assisted product desorption often proposed in heterogeneous catalysis (nanozymes) denounces the catalytic deactivation of these catalysts. On the contrary, the catalytic deactivation of rigid heterogeneous catalyst becomes noticeable in a continuous flow reactor. Surprisingly, it has been addressed inadequately and in an isolated manner. In this study, we have developed a cost-effective non-lithographic method for the fabrication of a PDMS-based microchannel-coupled-millreactor. Immobilized nickel particles are resistant to leaching in the flow process. During continuous operation, millireactors show a strong catalytic activity for reduction of resazurin and p-nitrophenol with a conversion rate of almost 100 %. Catalytic poisoning is ubiquitous and gets gradually prominent whereas complete catalytic deactivation of magnetic Ni-microparticles is found to be an instantaneous process. Relatively large-sized resorufin binds predominantly to the surface and thereby blocks the access of the substrate to the Ni-particles. The dissociations of product molecules - resorufin and p-aminophenol are the rate-limiting steps that caused the abrupt deactivation of Ni-microparticle. The kinetic mechanism of heterogeneous derived from the Langmuir-Hinshelwood mechanism satisfactorily explains the catalytic poisoning and deactivation of nickel microparticles. This study sheds light on the intricacies of catalytic activity and poisoning of magnetic nickel microparticles.