Characterization of metal oxide surfaces and thin semiconductor films by inelastic electron tunneling spectroscopy.

Inelastic electron tunneling spectroscopy (IETS) is a unique surface and interface analytical technique using electron tunneling through a metal/insulator/metal tunneling junction at cryogenic temperatures. It gives the vibrational spectrum of a very thin (nm) insulator film and the adsorbed species on it. The high sensitivity, good resolution, and wide spectral range inherent in IETS enable us to analyze the surface and interface of the insulator in detail. The tunneling junction is a good model system for oxide catalysts, electronic devises, and solid state sensors. Information about the surfaces of alumina and magnesia, the adsorption states and chemical reactions of adsorbed species occurring on these oxides can be obtained through an analysis of the tunneling spectra. The structures and properties of evaporated thin semiconductor films can also be studied. In this review, the surface characterization of alumina and magnesia, the adsorption and surface reactions of organic acids, esters, amides, and nitryls on these oxides, and the characterization of thin evaporated films of Si, Ge, and the oxides are summarized.     

Synthesis of plakevulin A and structure-activity relationships of its related compounds against DNA polymerases

Synthesis of plakevulin A and structure-activity relationships of its related compounds against DNA polymerases is described. We have achieved a total synthesis and revised the structure of plakevulin A. Several analogues including untenone A, manzamenone A, and optically active plakevulin A, were prepared and tested with an enzyme inhibition assay for mammalian DNA polymerases. The effect of the methyl ester moiety, and the substituents at the 1- and 4-positions of plakevulin A on DNA polymerase activities are discussed.     

Two Non-closure Properties on the Class of Subexponential Densities

Relations between subexponential densities and locally subexponential distributions are discussed. It is shown that the class of subexponential densities is neither closed under convolution roots nor closed under asymptotic equivalence. A remark is given on the closure under convolution roots for the class of convolution equivalent distributions.     

Cage-shaped borate esters with tris(2-oxyphenyl)methane or -silane system frameworks bearing multiple tuning factors: geometric and substituent effects on their Lewis acid properties

Boron complexes that contain new tridentate ligands, tris(o‐oxyaryl)methanes and ‐silanes, were prepared. These complexes had a cage‐shaped structure around a boron center and showed higher Lewis acidity and catalytic activity than open‐shaped boron compounds. The cage‐shaped ligands determined the properties of the borates by altering the geometry and were consistently bound to the metal center by chelation. The synthesized compounds were L?B(OC₆H₄)₃CH, L?B(OC₆H₄)₃SiMe, and its derivatives (L=THF or pyridine as an external ligand). Theoretical calculations suggested that the cage‐shaped borates had a large dihedral angle (C_ipso‐O‐B‐O) compared with open‐shaped borates. The geometric effect due to the dihedral angle means that compared with open‐shaped, the cage‐shaped borates have a greater Lewis acidity. The introduction of electron‐withdrawing groups on the aryl moieties in the cage‐shaped framework increased the Lewis acidity. Substitution of a bridgehead Si for a bridgehead C decreased the Lewis acidity of the boron complexes because the large silicon atom reduces the dihedral angle of C_ipso‐O‐B‐O. The ligand‐exchange rates of the para‐fluoro‐substituted compound B(OC₆H₃F)₃CH and the ortho‐phenyl‐substituted compound B(OC₆H₃Ph)₃CH were less than that of the unsubstituted borate B(OC₆H₄)₃CH. The ligand‐exchange rate of B(OC₆H₄)₃SiMe was much faster than that of B(OC₆H₄)₃CH. A hetero Diels–Alder reaction and Mukaiyama‐type aldol reactions were more effectively catalyzed by cage‐shaped borates than by the open‐shaped borate B(OPh)₃ or by the strong Lewis acid BF₃?OEt₂. The cage‐shaped borates with the bulky substituents at the ortho‐positions selectively catalyzed the reaction with less sterically hindered substrates, while the unsubstituted borate showed no selectivity.     

Efficient direct electron transfer with enzyme on a nanostructured carbon film fabricated with a maskless top-down UV/ozone process

We have developed a new carbon film electrode material with thornlike surface nanostructures to realize efficient direct electron transfer (DET) with enzymes, which is very important for various enzyme biosensors and for anodes or cathodes used in biofuel cells. The nanostructures were fabricated using UV/ozone treatment without a mask, and the obtained nanostructures were typically 2-3.5 nm high as confirmed by atomic force microscopy measurements. X-ray photoelectron spectroscopy and transmission electron microscopy revealed that these nanostructures could be formed by employing significantly different etching rates depending on nanometer-order differences in the local sp(3) content of the nanocarbon film, which we fabricated with the electron cyclotron resonance sputtering method. These structures could not be realized using other carbon films such as boron-doped diamond, glassy carbon, pyrolyzed polymers based on spin-coated polyimide or vacuum-deposited phthalocyanine films, or diamond-like carbon films because those carbon films have relatively homogeneous structures or micrometer-order crystalline structures. With physically adsorbed bilirubin oxidase on the nanostructured carbon surface, the DET catalytic current amplification was 30 times greater than that obtained with the original carbon film with a flat surface. This efficient DET of an enzyme could not be achieved by changing the hydrophilicity of the flat carbon surface, suggesting that DET was accelerated by the formation of nanostructures with a hydrophilic surface. Efficient DET was also observed using cytochrome c.     

Molecular Design of Polyoxometalate-Based Compounds for Environmentally-Friendly Functional Group Transformations: From Molecular Catalysts to Heterogeneous Catalysts

This review article summarizes our recent researches for molecular design of polyoxometalates (POMs) and their related compounds for environmentally-friendly functional group transformations. The divacant POM [γ-SiW₁₀O₃₄(H₂O)₂]⁴⁻ exhibits high catalytic performance for mono-oxygenation-type reactions including epoxidation of olefins and allylic alcohols, sulfoxidation, and hydroxylation of organosilanes with H₂O₂. We have successfully synthesized several POM-based molecular catalysts (metal-substituted POMs) with controlled active sites by the introduction of metal species into the divacant POM as a “structural motif”. These molecular catalysts can efficiently activate H₂O₂ (vanadium-substituted POM for epoxidation) and alkynes (copper-substituted POM for click reaction and oxidative homocoupling of alkynes). The aluminum-substituted POM exhibits Lewis acidic catalysis for diastereoselective cyclization of (+)-citronellal to (−)-isopulegol. In addition, we have developed POM-based “molecular heterogeneous catalysts” by the “solidification” and “immobilization” of catalytically active POMs.     

Synthesis of oxosumanenes through benzylic oxidation

Oxosumanenes were synthesized through benzylic oxidation. The electronic and redox properties were revealed to exhibit the expanded π-conjugation compared to sumanene. Single-crystal X-ray analysis of monooxosumanene showed columnar π-stacking in a concave-convex fashion. Stereoselective trimethylation of the trioxo derivative was performed via 1,2-addition to the carbonyl groups.     

Polymorphism of 4-Fluorophenylpyruvic Acid Studied by X-Ray Crystallography and Vibrational Spectroscopy

Two polymorphic forms (I and II) of 4-fluorophenylpyruvic acid (F-PPA) were obtained by crystallization from different solvents, showing a melting point at 163.2 and 171.0 °C. Crystal structures of polymorphs I and II were determined by X-ray crystallography. IR and Raman spectra of the two polymorphs were measured and the spectral characteristics were compared with those of phenylpyruvic acid. the two polymorphs show similar molecular and crystal structures to each other, except for the molecular geometries of the enol and the carboxylic acid moieties. Distinct IR spectral differences which result from the crystal field splitting were observed between the two polymorphs.     

Highly resolved scanning tunneling microscopy study of Si(0 0 1) surfaces flattened in aqueous environment

A surface preparation method with fine SiO₂ particles in water is developed to flatten Si(0 0 1) surfaces on the nanometer scale. The flattening performance of Si(0 0 1) surfaces after the surface preparation method is investigated by scanning tunneling microscopy. The observed surface is so flat that 95% of the view area (100 × 100 nm²) is composed of only three atomic layers, namely, one dominant layer occupying 50% of the entire area and two adjacent layers. Furthermore, a magnified image shows the outermost Si atoms regularly distributed along the 〈1 1 0〉 direction on terraces.     

Enzymatic resolution of flavanone oximes

The optically active (R)- and (S)-flavanones were prepared by an enzymatically enantioselective hydrolysis of (±)-flavanone oxime O-acylates employing lipases, followed by hydrolysis with acid.