Numerical Nahm transform for 2-caloron solutions

A new numerical method for performing the Nahm transform for charge k=2 caloron is presented. The Weyl equations with boundary impurities are solved directly and the determination of the appropriate basis to the linear system is established. The action densities of the 2-calorons with 10 moduli parameters are shown.     

Enhanced photon generation in a Nb/n-InGaAs/p-InP superconductor/semiconductor-diode light emitting device

We experimentally demonstrate Cooper pairs' drastic enhancement of the band-to-band radiative recombination rate in a semiconductor. Electron Cooper pairs injected from a superconducting electrode into an active layer by the proximity effect recombine with holes injected from a p-type electrode. The recombination of a Cooper pair with p-type carriers dramatically increases the photon generation probability of a light-emitting diode in the optical-fiber communication band. The measured radiative decay time rapidly decreases with decreasing temperature below the superconducting transition temperature of the niobium electrodes. Our results indicate the possibility to open up new interdisciplinary fields between superconductivity and optoelectronics.     

Molecular dynamics simulations of structural disordering and forming defects in a milling process for selenium

In our previous paper, structural changes of selenium powders ground by a planetary ball mill at various rotational speeds were investigated for the nanostructural modification of particles using mechanical grinding process. The experimental results indicated that the amorphisation of Se by grinding accompanies lattice strain, and the lattice strain arises from impact energy which is more than an energy related to intermolecular interaction. In this paper, molecular dynamics simulations of selenium have been carried out under compressing conditions of various pressure strengths for obtaining information of the lattice strain at atomic level. Then, dynamical behaviour of atomic configuration has been discussed in this process. The structural disordering and formation of the structural defects were estimated by deviations of bond length and angle and the number of created defects before and after compressing from simulated results. The disordering took place during compressing at various pressure strengths, and the disordered atoms return to their initial positions at lower pressure. Stable disordered state and defects after the compression can however remain by compression at more than a certain pressure strength mainly associated with binding energy of selenium.     

Development of a high‐resolution confocal micro‐XRF instrument equipped with a vacuum chamber

A confocal micro‐X‐ray fluorescence (micro‐XRF) instrument equipped with a vacuum chamber was newly developed. The instrument is operated under a vacuum condition to reduce the absorption of XRF in the atmosphere. Thin metal layers were developed to evaluate the confocal volume, corresponding to depth resolution. A set of thin metal layers (Al, Ti, Cr, Fe, Ni, Cu, Zr, Mo, and Au) was prepared by a magnetron sputtering technique. The depth resolutions of the new instrument were varied from 56.0 to 10.9 µm for an energy range from 1.4 to 17.4 keV, respectively. The lower limit of detection (LLD) was estimated by comparison with a glass standard reference material NIST SRM 621). The LLDs obtained by a conventional micro‐XRF were compared with the LLDs obtained by a confocal micro‐XRF instrument. The LLDs were improved in the measurement under confocal configuration because of the reduction of background intensity. Finally, layered materials related to forensic investigation were measured. The confocal micro‐XRF instrument was able to nondestructively obtain the distribution of light elements that cannot be detected by measurement in air. Copyright © 2013 John Wiley & Sons, Ltd.     

Laser cooling of a small number of Be+ ions in a penning trap

Be⁺ ions stored in a Penning trap were cooled by a laser beam perpendicular to the magnetic field. The cooled ions are strongly coupled and phase transitions of up to 100 ions were observed. In experiments with only a few ions stored in the trap, a stepwise decrease in fluorescence intensity was observed. All steps are of the same size and so every step is attributed to a single ion. The discrete changes in fluorescence occurred more frequently when the background pressure was increased, caused by collisions between stored ions and background neutral molecules.     

Large Time Asymptotics for the Kadomtsev–Petviashvili Equation

We study the large time asymptotic behavior of solutions to the Kadomtsev–Petviashvili equations $$\left\{\begin{array}{ll} u_{t} + u_{xxx} + \sigma \partial_{x}^{-1}u_{yy} = -\partial_{x}u^{2}, \quad \quad (x, y) \in {\bf R}^{2}, t \in {\bf R},\\ u(0, x, y) = u_{0}( x, y), \, \quad \quad \qquad \qquad (x, y) \in {\bf R}^{2},\end{array}\right.$$ where σ = ±1 and \({\partial_{x}^{-1} = \int_{-\infty}^{x}dx^{\prime} }\) . We prove that the large time asymptotics of the derivative u _x of the solution has a quasilinear character.     

Polymeric saturable-absorber mirror for passive Q-switching of a laser-diode-pumped Nd3+:YVO4 microchip laser

A polymeric multilayered mirror doped with a saturable dye worked as a passive Q-switch of a laser-diode-pumped Nd(3+):YVO4 microchip laser. The multilayered mirror consisted of alternately spin-coated layers of polyvinylcarbazole (PVK) and cellulose acetate on a glass substrate. A dye of bis-(dimethylaminodithiobenzil)-nickel was doped in one of the layers of PVK, providing the repetitively Q-switched pulses. The pulse width and repetition rate were 4 ns and 68 kHz, respectively, for a laser-cavity length of 5 mm, and the average and the peak power were 40 mW and 156 W, respectively, for the highest pump power of 435 mW. The dependence of the Q-switched characteristics on the pump power and on the concentration of the doped dye is described.