An unusual twist conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol

The ring conformation of 2-O-methyl-1,3,4,5-tetrakis-O-tert-butyldiphenylsilyl-myo-inositol was in a twist form both in solid state and in solution. This is the first observation of a stable twist conformer induced by the introduction of bulky silyl protecting groups.     

Kinetics and mechanism of the reduction of 1,10-phenanthroline—copper(II) complex

The cyclic voltammetric study of 1,10-phenanthroline—copper(II) complex was carried out in acidic buffer solution. It was found from the current—mole ratio (copper (II): 1,10-phenanthroline) relationship that the maximum coordination number of 1,10-phenanthroline—copper(II) complex was four under the present experimental condition. The reduction mechanism and kinetics of copper(II) was studied in the presence of various concentrations of 1,10-phenanthroline.     

Stereospecific living radical polymerization for simultaneous control of molecular weight and tacticity

The simultaneous control of the molecular weights and the tacticity was attained even during radical polymerization by the judicious combinations of the living/controlled radical polymerizations based on the fast interconversion between the dormant and active species, and the stereospecific radical polymerizations mediated by the added Lewis acids or polar solvents via the coordination to the monomer/polymer terminal substituents. This can be useful for various monomers including not only conjugated monomers, such as acrylamides and methacrylates, but also nonconjugated ones such as vinyl acetate and N‐vinylpyrrolidone. Stereoblock polymers were easily obtained by the addition of the Lewis acids or by change of the solvents during the living radical polymerizations. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6147–6158, 2006     

Preparation of dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed

An attempt was made to produce carrier particles for dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed. The lactose carrier particles were coated with lactose aqueous solution containing hydroxypropyl methyl cellulose (HPMC) as a binder using a Wurster coating apparatus. Drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers under various particle surface conditions. These powder mixtures were aerosolized by a Jethaler((R)), and the in vitro deposition properties of salbutamol sulfate were evaluated by a twin impinger. The in vitro inhalation properties of the powder mixture prepared using the coated lactose carrier differed significantly compared with those of the powder mixture prepared using the uncoated lactose carrier, indicating improvements in in vitro inhalation properties of sulbutamol sulfate. In vitro inhalation properties increased with the surface coating time. This surface coating system would thus be valuable for increasing the in vitro inhalation properties of dry powder inhalation with lactose carrier particles.     

Uptake of alkali and alkaline earth metal ions into electrochemically pretreated glassy carbon fibres by flow-through electrolysis

When glassy carbon fibres are used, alkali and alkaline earth metal ions are adsorbed in the micropores which are created or activated by oxidative treatment of the fibres. The average pore radius was estimated to be 2 nm by nitrogen adsorption experiments. Uptake was studied with a flow system consisting of a flow-through carbon-fibre electrode; a dropping mercury electrode at the end of the flow line monitored changes in the metal ion concentrations. The ions were taken up at negative potentials and released at positive potentials. The amount taken up increased in the sequence Na⁺ < Li⁺ < H⁺, suggesting that the ions were desolvated before entering the pore system.     

Titrimetric determination of silver,chloride and bromide in glasses

Titrimetric methods are described for the determination of total silver, free silver or free halide (Cl, Br and I), and bromide (or iodide) in glasses. Total silver is titrated potentiometrically with standard bromide solution after hydrofluoric—sulfuric acid sample decomposition followed by sodium hydrogensulfate fusion for volatilizing hydrogen halide. Free silver is determined similarly on a separate sample without the fusion step. For glasses containing excess of halide, free halide is titrated potentiometrically with standard silver(I) solution after dissolution of the sample in ice-cold hydrofluoric—nitric acid. Total bromide (or iodide) is determined by iodometric titration after oxidation to bromate (or iodate) with hypochlorite solution. The methods have been applied to a wide range of complex glass compositions and results are compared with values obtained by controlled-potential coulometry and x-ray fluorescence analysis.     

Real-time measurement of nitric oxide using a bio-imaging and an electrochemical technique

Nitric oxide (NO) is an important mediator responsible for numerous physiological phenomena. Transient levels of NO in biological systems usually range from nanomolar to micromolar concentrations, with a rapid return to basal levels normally seen following these increases. Because NO can diffuse only over a local area in limited time due to such low levels of production and due to its short life-time prior to degradation, high spatial and temporal resolutions are required for direct and continuous NO measurement if the physiological role of NO is to be investigated in any system. For such purposes, analytical methods based on bio-imaging and electrochemical techniques for the measurement of NO are useful. In this paper, we describe the successful application of these methods to a number of biological systems. Specifically, complementary application of these methods demonstrate that it is possible to detect real-time NO production from nervous tissue with high spatial and temporal resolutions.     

Voltammetric detection of avidin and biotin by biotin labeled with cysteine

An avidin-biotin assay was developed from a voltammetric procedure using biotin labeled with cysteine. Mercury(II) as a marker was used to detect avidin and biotin, because the oxidation wave of mercury decreases when the cysteine part of labeled biotin(LB) complexes with mercury(II).The formation of the mercury(II)-cysteine complex is suppressed when the LB binds to the biotin site of avidin. Accordingly, the concentration of avidin can be estimated from the increasing mercury peak current. Detection of biotin is also carried out by a competitive reaction of biotin and the LB to the binding site on avidin, where the addition of biotin decreases the peak current of mercury. Limits of detection for avidin and biotin were in the 10^–9 mol/L range. The length of the spacer between the cysteine and biotin was investigated. It was observed that the strength of binding increased with increasing length of spacer. Size considerations rules out steric influences, so it is suggested that the binding constant depends on hydrophobic interactions in the binding site.     

LIGHT INDUCED FLUORESCENCE SPECTRAL CHANGES IN NATIVE PHYTOCHROME FROM Secale cereale L. AT LIQUID NITROGEN TEMPERATURE

Abstract— Fluorescence spectra of native rye phytochrome were determined under different light conditions at liquid nitrogen temperature. Fluorescence spectrum of the red-light-absorbing form (Pr) had a major peak at about 685 nm (14 600 cm⁻¹) and a broad sub-peak at about 515 nm (19 400 cm⁻¹). The peak height at 685 nm was reduced by irradiation with monochromatic light of 640 nm, and a new peak became obvious at about 702 nm (14250 cm⁻¹). This spectral change was almost completely reversed by subsequent irradiation with 700-nm light. Fluorescence spectrum of the photoequilibrium mixture of Pr and far-red-light absorbing form under continuous red light showed a sharp peak at about 685 nm having a peak height ca. 12% of Pr, and a broad sub-peak at about 508 nm (19 700 cm⁻¹). Light of 730 nm did not reduce the peak height at about 685 nm but induced a new shoulder at about 699 nm (14300 cm⁻¹). Monochromatic light of 640 and 700 nm given following the light of 730 nm could not reverse the spectral change at 699 nm induced by the irradiation with 730-nm light. Fluorescence spectrum of Pr in partially degraded phytochrome was similar to that in native phytochrome but the peak position in the red region was shifted by about 5 nm (100 cm⁻¹) to the blue.     

Analysis by partial reflection spectrometry of protonated tetraphenylporphyrin adsorbed at a liquid-liquid interface

Visible reflection spectra of diprotonated meso-tetraphenylporphyrin adsorbates spontaneously formed at a dodecane-aqueous sulfuric acid interface have been measured using a home-made device comprising a prism-cell and variable-angle optics. The tilt angle of the pyrrole ring plane was estimated to be 47 degrees from the interface normal by use of an experimentally evaluated molecular density (1.20x10(-10) mol cm(-2)) of the diprotonated molecule in a monolayer form at the liquid-liquid interface. Positive and negative bands have been observed in the p-polarized partial internal reflection (p-PIR) spectra, whose band locations correspond to those in p-polarized external reflection (p-ER) spectra. Nevertheless, the bands in the p-PIR exhibited reversed sign to those of p-ER spectra. These suggest that the surface selection rule of the p-PIR spectrometry has a reversal rule of p-ER and p-PIR can also be used for the analysis of molecular orientation.