Novel preparation of electrically conducting poly (vinyl chloride) by photo-dehydrochlorination from poly (vinyl chloride)/polypyrrole composite film

Polypyrrole (PPy) was deposited electrochemically on a platinum plate from a nitric acid solution of pyrrole. The PVC/PPy composite film was finally obtained by casting poly(vinyl chloride) (PVC) onto the PPy electrode from a tetrahydrofuran solution of PVC. The prepared composite film was irradiated at 90°C with a low-pressure mercury lamp in the stream of hydrogen gas saturated with steam, and the PVC film was dehydrochlorinated, leading to the formation of conjugated polyene. The electrical conductivity (σ) of the PVC film in the irradiated composite film was reveled: σ=2.51 × 10^?5S cm^?1. By iodine doping, σ was further enhanced up to 5.04 X 10^?3 S cm^?1. The tensile strength of the irradiated composite film became larger than that of the original PVC film; i.e., the stress at break was: 461 (composite film); 401 kg cm^?2 (PVC). These results were brought about by the doping of radical species to the conjugated polyene. The anion, NO^?₃, doped during the electrodeposition of PPy was photodecomposed to generate radical NO₂ and this species was doped to the polyene, resulting in the formation of electrically conductive PVC and mechanically improved composite film. © 1994 John Wiley & Sons, Inc.     

Achievement of ring inversion of myo-inositol derivatives due to silyloxy/silyloxy repulsion enhanced by the trans-substituents on both sides

The introduction of quite bulky trialkyl or diarylalkylsilyl groups into vicinal trans-hydroxy groups induced a conformational flip of certain multifunctionalized cyclohexane rings from the usual chair form possessing more equatorial substituents (equatorial-rich chair form) into another chair-form that has more axial substituents (axial-rich chair form). This realization was experimentally revealed by the conformational study of the synthetic myo-inositol derivatives possessing two tert-butyldimethylsilyl (TBS), two triisopropylsilyl (TIPS), or two tert-butyldiphenylsilyl (TBDPS) groups on an adjacent trans-diol. Among them, the cyclohexane rings of the 4,5-bis-O-TIPS-myo-inositol, 4,5-bis-O-TBDPS-myo-inositol, and 1,2,3,6-tetra-O-benzyl-4,5-bis-O-TBDPS-myo-inositol were in the axial-rich chair form. Comparison of the ring conformations also revealed that the order of the repulsion was OTBDPS/OTBDPS>OTIPS/OTIPS>OTBS/OTBS, and the silyloxy/silyloxy repulsion was enhanced when the two silyloxy groups were placed in the center of the contiguous four equatorial substituents.     

Synthesis of Branched Ribo‐Polysaccharides with Defined Structures by Ring‐Opening Polymerization of 1,4‐Anhydro Ribo‐Disaccharide Monomer

Ring‐opening polymerization of a new 1,4‐anhydro‐disaccharide monomer, 1,4‐anhydro‐2‐O‐benzyl‐3‐O‐(2,3,4,6‐tetra‐O‐benzyl‐β‐D ‐galactopyranosyl)‐α‐D ‐ribopyranose, which was prepared by the glycosylation of 1,4‐anhydro‐2‐O‐benzyl‐α‐D ‐ribopyranose with 2,3,4,6‐tetra‐O‐acetyl‐1‐O‐trichloroacetimidoyl‐α‐D ‐galactopyranose, was performed for the first time with boron trifluoride etherate to give stereoregular branched ribofuranans having high molecular weights of M̄_n = 43.0×10³ and positive specific rotation of [α]_D²⁵ = +25.1 deg·dm^–1· g^–1·cm³. The repalcement of the benzyl group by a hydroxyl group gave stereoregular 1,5‐α‐D ‐ribofuranans having a β‐D ‐galactopyranose branch in every repeating unit. The copolymerization of the ribo‐disaccharide monomer with 1,4‐anhydro‐2,3‐di‐O‐benzyl‐α‐D ‐ribopyranose was also carried out to afford stereoregular 1,5‐α‐D ‐ribofuranans having randomly distributed galactopyranose branches on the main chain.     

Numerical solution of integral equations in Chebyshev series

In this paper we discuss the Chebyshev series method with Newton iterations for the numerical solution of nonlinear integral equations. An existence theorem for nonlinear integral equations is given using a functional analytic approach. A method to compute and error bound to an approximate solution is discussed on the basis of the theorem.     

Effects of surface processing of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effects of the surface processing of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate were investigated. Lactose carrier particles were processed using a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared, consisting of micronized salbutamol sulfate and coarse lactose carriers with various particle surface conditions prepared by surface processing. These powder mixtures were aerosolized by a Jethaler, and the in vitro inhalation properties of salbutamol sulfate were evaluated with a twin impinger. Compared with those of the powder mixed with unprocessed lactose carriers, the in vitro inhalation properties of the powder mixture prepared using the surface processed lactose carriers were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. The in vitro inhalation properties increased with the rotor rotation rate. Using this surface processing system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles.     

WAVELENGTH DEPENDENCE (150–290 nm) OF THE FORMATION OF THE CYCLOBUTANE DIMER AND THE (6–4) PHOTOPRODUCT OF THYMINE

The action cross sections for the formation of the cyclobutane dimer and the (6-4) photoproduct of thymine as well as the absorption cross sections of thymine were determined in the wavelength region between 150 and 290 nm. Thymine films sublimed on glass plates were irradiated by monochromatic photons in a vacuum; the induced photoproducts were quantitatively analyzed by high-performance liquid chromatography (HPLC). Under our conditions, two major peaks appeared on the HPLC chromatograms of irradiated samples. The two peaks were identified as being the cis-syn cyclobutane dimer and the (6-4) photoproduct, based on their HPLC retention times, absorption spectra in the effluent, and photochemical reactivity. The fractions of the two photoproducts increased linearly with the fluence at low fluences over the entire wavelength range. Their action cross sections were determined by the slopes of the linear fluence response curve at 10 nm intervals between 150 and 290 nm. The two action spectra showed a similar wavelength dependence and had a maximum at 270 nm as well as two minor peaks at 180 and 220 nm, at which wavelengths the peaks of the absorption spectrum of thymine sublimed on a CaF2 crystal plate appeared. The quantum yields had relatively constant values of around 0.008 for the dimer and 0.013 for the (6-4) photoproduct above 200 nm, decreasing to 0.003 and 0.006, respectively, at 150 nm as the wavelength became shorter.     

Nucleotide and aldehyde analysis by HPLC for determination of radical induced damage

Summary The analysis of two metabolite groups, nucleotides and aldehydes, is necessary for assessment of oxygen radical metabolism during hypoxia and reoxygenation.Nucleotides and their derivatives were determined by HPLC using gradient elution with 10 mM NH₄H₂PO₄ buffer containing 2 mM t-butylammoniumphosphate and acetonitrile.Aldehydes occuring after lipid peroxidation were analyzed by derivatisation to dinitrophenylhydrazones followed by TLC and HPLC separation with methanol/water on an ODS column.