Uptake of alkali and alkaline earth metal ions into electrochemically pretreated glassy carbon fibres by flow-through electrolysis

When glassy carbon fibres are used, alkali and alkaline earth metal ions are adsorbed in the micropores which are created or activated by oxidative treatment of the fibres. The average pore radius was estimated to be 2 nm by nitrogen adsorption experiments. Uptake was studied with a flow system consisting of a flow-through carbon-fibre electrode; a dropping mercury electrode at the end of the flow line monitored changes in the metal ion concentrations. The ions were taken up at negative potentials and released at positive potentials. The amount taken up increased in the sequence Na⁺ < Li⁺ < H⁺, suggesting that the ions were desolvated before entering the pore system.     

Real-time measurement of nitric oxide using a bio-imaging and an electrochemical technique

Nitric oxide (NO) is an important mediator responsible for numerous physiological phenomena. Transient levels of NO in biological systems usually range from nanomolar to micromolar concentrations, with a rapid return to basal levels normally seen following these increases. Because NO can diffuse only over a local area in limited time due to such low levels of production and due to its short life-time prior to degradation, high spatial and temporal resolutions are required for direct and continuous NO measurement if the physiological role of NO is to be investigated in any system. For such purposes, analytical methods based on bio-imaging and electrochemical techniques for the measurement of NO are useful. In this paper, we describe the successful application of these methods to a number of biological systems. Specifically, complementary application of these methods demonstrate that it is possible to detect real-time NO production from nervous tissue with high spatial and temporal resolutions.     

LIGHT INDUCED FLUORESCENCE SPECTRAL CHANGES IN NATIVE PHYTOCHROME FROM Secale cereale L. AT LIQUID NITROGEN TEMPERATURE

Abstract— Fluorescence spectra of native rye phytochrome were determined under different light conditions at liquid nitrogen temperature. Fluorescence spectrum of the red-light-absorbing form (Pr) had a major peak at about 685 nm (14 600 cm⁻¹) and a broad sub-peak at about 515 nm (19 400 cm⁻¹). The peak height at 685 nm was reduced by irradiation with monochromatic light of 640 nm, and a new peak became obvious at about 702 nm (14250 cm⁻¹). This spectral change was almost completely reversed by subsequent irradiation with 700-nm light. Fluorescence spectrum of the photoequilibrium mixture of Pr and far-red-light absorbing form under continuous red light showed a sharp peak at about 685 nm having a peak height ca. 12% of Pr, and a broad sub-peak at about 508 nm (19 700 cm⁻¹). Light of 730 nm did not reduce the peak height at about 685 nm but induced a new shoulder at about 699 nm (14300 cm⁻¹). Monochromatic light of 640 and 700 nm given following the light of 730 nm could not reverse the spectral change at 699 nm induced by the irradiation with 730-nm light. Fluorescence spectrum of Pr in partially degraded phytochrome was similar to that in native phytochrome but the peak position in the red region was shifted by about 5 nm (100 cm⁻¹) to the blue.     

Analysis by partial reflection spectrometry of protonated tetraphenylporphyrin adsorbed at a liquid-liquid interface

Visible reflection spectra of diprotonated meso-tetraphenylporphyrin adsorbates spontaneously formed at a dodecane-aqueous sulfuric acid interface have been measured using a home-made device comprising a prism-cell and variable-angle optics. The tilt angle of the pyrrole ring plane was estimated to be 47 degrees from the interface normal by use of an experimentally evaluated molecular density (1.20x10(-10) mol cm(-2)) of the diprotonated molecule in a monolayer form at the liquid-liquid interface. Positive and negative bands have been observed in the p-polarized partial internal reflection (p-PIR) spectra, whose band locations correspond to those in p-polarized external reflection (p-ER) spectra. Nevertheless, the bands in the p-PIR exhibited reversed sign to those of p-ER spectra. These suggest that the surface selection rule of the p-PIR spectrometry has a reversal rule of p-ER and p-PIR can also be used for the analysis of molecular orientation.     

Dependency of control parameters on a rate coefficient giving the potential curvature in a reaction cascade model

Many chemical reactions in vivo are self-controlled by fluxes of chemical energy and matter through biological systems, so the induction of such reactions can be governed by changes in the control parameters of the rate equation. A potential of a system is assumed to be given by Gibbs' functionG(T, P, x), which is continuously differentiable, and the rate equation can be derived from the differential (–G/x) of Taylor's expansion ofG _(T,P)(x) for the order parameterx, which corresponds to the product number, at around the critical pointC(T _C, P_C). The equation is described bydx/dt=(x)–k₁x–k₂x³, andk ₂>0. In this equation,k ₁ andk ₂ are functions of the control parameters, temperatureT and pressureP, andk ₁ is allowed to have a positive or negative values as (T, P). Thenk ₁ is an important factor that decides the induction conditions of the reactions with a phase transition in the steady statex=0. Because bothk ₁ (the transition parameter) andG are the quantity of state, they are given by the total differential, and functions that decideG andk ₁ are related to a mutual inverse function. From the above relation, the rate of change ink ₁ by G, which corresponds to the reaction energy of the system, is uniquely determined by a function ofk ₁, [f(k ₁ ^± )] andf(k ₁ ^± ) is described approximately by ±₁ k ₁ ^± in the transient process thatk ₁ approaches zero, where ₁ implies 1/RT. These results indicate that internal driving forces caused by a stimulus in a system are proportional tok ₁ ^± and that the system is regulated by competition of the forces. an approximate function fork ₁ in the transient process is described by tanh (G/RT) and Arrhenius' law is elucidated from this theory.Decreased January 19, 1992     

Ruthenium‐Catalyzed Cycloisomerization of 2,2′‐Diethynyl‐ biphenyls Involving Cleavage of a Carbon–Carbon Triple Bond

A ruthenium complex catalyzes a new cycloisomerization reaction of 2,2′‐diethynylbiphenyls to form 9‐ethynylphenanthrenes, thereby cleaving the carbon–carbon triple bond of the original ethynyl group. A metal–vinylidene complex is generated from one of the two ethynyl groups, and its carbon–carbon double bond undergoes a [2+2] cycloaddition with the other ethynyl group to form a cyclobutene. The phenanthrene skeleton is constructed by the subsequent electrocyclic ring opening of the cyclobutene moiety.     

Crystallisation of nematic liquid crystal mixtures

In this paper, we propose a method to accelerate the crystallisation of nematic liquid crystal mixtures based on crystallisation theory. This method is to hold a nematic liquid crystal sample at a temperature suitable for crystal growth after aging it at a temperature suitable for nucleation. After we specified these temperatures of a nematic liquid crystal mixture using differential scanning calorimetry, we demonstrate that the two-temperature aging method is effective for the crystallisation of other nematic liquid crystal mixtures in which the crystal-liquid crystal transition temperature has so far been undetectable.     

2′,4′-BNA/LNA with 9-(2-Aminoethoxy)-1,3-diaza-2-oxophenoxazine Efficiently Forms Duplexes and Has Enhanced Enzymatic Resistance**

Artificial nucleic acids are widely used in various technologies, such as nucleic acid therapeutics and DNA nanotechnologies requiring excellent duplex-forming abilities and enhanced nuclease resistance. 2′-O,4′-C-Methylene-bridged nucleic acid/locked nucleic acid (2′,4′-BNA/LNA) with 1,3-diaza-2-oxophenoxazine (BNAP ( B^H )) was previously reported. Herein, a novel B^H analogue, 2′,4′-BNA/LNA with 9-(2-aminoethoxy)-1,3-diaza-2-oxophenoxazine (G-clamp), named BNAP-AEO ( B^AEO ), was designed. The B^AEO nucleoside was successfully synthesized and incorporated into oligodeoxynucleotides (ODNs). ODNs containing B^AEO possessed up to 10⁴-, 152-, and 11-fold higher binding affinities for complementary (c) RNA than those of ODNs containing 2′-deoxycytidine ( C ), 2′,4′-BNA/LNA with 5-methylcytosine ( L ), or 2′-deoxyribonucleoside with G-clamp ( P^AEO ), respectively. Moreover, duplexes formed by ODN bearing B^AEO with cDNA and cRNA were thermally stable, even under molecular crowding conditions induced by the addition of polyethylene glycol. Furthermore, ODN bearing B^AEO was more resistant to 3′-exonuclease than ODNs with phosphorothioate linkages.     

Effect of dopant structure on refractive index and glass transition temperature of polymeric fiber‐optic materials

Graded‐index plastic optical fibers, composed of doped polymers, have advantages over conventional glass optical fibers, but need to be developed further for practical application. Here, a variety of aromatic sulfide dopants were synthesized, and their effects on the refractive indexes and glass transition temperatures (T_g) of poly(methyl methacrylate) and methyl 2‐chloroacrylate/2,2,2‐trichloroethyl methacrylate copolymers were studied. While polymers containing large dopants exhibited relatively high refractive indices, their T_g values were low, making these materials unsuitable for graded‐index plastic optical fiber applications. Six dopants yielded polymers that exhibited higher T_g values than the conventionally used (diphenyl sulfide)‐doped polymer. The dopant dibenzothiophene, in particular, yielded polymers with the highest refractive indexes and T_g values, and polymers containing (phenylthio)benzene dopants also performed well. Copyright © 2013 John Wiley & Sons, Ltd.