Highly beta-selective O-glucosidation due to the restricted twist-boat conformation

[reaction: see text] Ethyl 1-thio-2,3,4,6-tetrakis-O-triisopropylsilyl-beta-d-glucopyranoside, ethyl 6-O-benzyl-1-thio-2,3,4-tris-O-triisopropylsilyl-beta-d-glucopyranoside, and ethyl 6-O-pivaloyl-1-thio-2,3,4-tris-O-triisopropylsilyl-beta-d-glucopyranoside induced highly beta-selective O-glucosidations. Among them, the 6-O-pivaloylated substrate provided the best selectivity up to alpha/beta = 3:97 with cyclohexylmethanol, and the substrate was used for glucosidations with secondary and tertiary alcohols in a highly beta-selective manner. The selectivity would be caused by the twist-boat conformation of the pyranose; this is the first beta-selective O-glucosidation based on conformational control of the pyranose ring.     

Influence of RNA Strand Rigidity on Polyion Complex Formation with Block Catiomers

Polyion complexes (b‐PICs) are prepared by mixing single‐ or double‐stranded oligo RNA (aniomer) with poly(ethylene glycol)‐b‐poly(l ‐lysine) (PEG‐PLL) (block catiomer) to clarify the effect of aniomer chain rigidity on association behaviors at varying concentrations. Here, a 21‐mer single‐stranded RNA (ssRNA) (persistence length: 1.0 nm) and a 21‐mer double‐stranded RNA (small interfering RNA, siRNA) (persistence length: 62 nm) are compared. Both oligo RNAs form a minimal charge‐neutralized ionomer pair with a single PEG‐PLL chain, termed unit b‐PIC (uPIC), at low concentrations (<≈0.01 mg mL⁻¹). Above the critical association concentration (≈0.01 mg mL⁻¹), ssRNA b‐PICs form secondary associates, PIC micelles, with sizes up to 30–70 nm, while no such multimolecular assembly is observed for siRNA b‐PICs. The entropy gain associated with the formation of a segregated PIC phase in the multimolecular PIC micelles may not be large enough for rigid siRNA strands to compensate with appreciably high steric repulsion derived from PEG chains. Chain rigidity appears to be a critical parameter in polyion complex association.

     

Direct through anionic,cationic, and radical active species: Terminal carbon–halogen bond for “controlled”/living polymerizations of styrene

In this work, we examined the synthesis of novel block (co)polymers by mechanistic transformation through anionic, cationic, and radical living polymerizations using terminal carbon–halogen bond as the dormant species. First, the direct halogenation of growing species in the living anionic polymerization of styrene was examined with CCl₄ to form a carbon–halogen terminal, which can be employed as the dormant species for either living cationic or radical polymerization. The mechanistic transformation was then performed from living anionic polymerization into living cationic or radical polymerization using the obtained polymers as the macroinitiator with the SnCl₄/n‐Bu₄NCl or RuCp^*Cl(PPh₃)/Et₃N initiating system, respectively. Finally, the combination of all the polymerizations allowed the synthesis block copolymers including unprecedented gradient block copolymers composed of styrene and p‐methylstyrene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 465–473     

Preparation of dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed

An attempt was made to produce carrier particles for dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed. The lactose carrier particles were coated with lactose aqueous solution containing hydroxypropyl methyl cellulose (HPMC) as a binder using a Wurster coating apparatus. Drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers under various particle surface conditions. These powder mixtures were aerosolized by a Jethaler((R)), and the in vitro deposition properties of salbutamol sulfate were evaluated by a twin impinger. The in vitro inhalation properties of the powder mixture prepared using the coated lactose carrier differed significantly compared with those of the powder mixture prepared using the uncoated lactose carrier, indicating improvements in in vitro inhalation properties of sulbutamol sulfate. In vitro inhalation properties increased with the surface coating time. This surface coating system would thus be valuable for increasing the in vitro inhalation properties of dry powder inhalation with lactose carrier particles.     

Electrodeposition of manganese and molybdenum mixed oxide thin films and their charge storage properties

Manganese and molybdenum mixed oxides in a thin film form were deposited anodically on a platinum substrate by cycling the electrode potential between 0 and +1.0 V vs Ag/AgCl in aqueous manganese(II) solutions containing molybdate anion (MoO(4)2-). A possible mechanism for the film formation is as follows. First, electrooxidation of Mn2+ ions with H2O yields Mn oxide and protons. Then, the protons being accumulated near the electrode surface react with MoO(4)2- to form polyoxomolybdate through a dehydrated condensation reaction (by protonation and dehydration). The condensed product coprecipitates with the Mn oxide. Cyclic voltammetry of the Mn/Mo oxide film-coated electrode in aqueous 0.5 M Na2SO4 solution exhibited a pseudocapacitive behavior with higher capacitance and better rate capability than that of the pure Mn oxide prepared similarly, most likely as a result of an increase in electrical conductivity of the film. Electrochemical quartz crystal microbalance and X-ray photoelectron spectroscopy clearly demonstrated that the observed pseudocapacitive behavior results from reversible extraction/insertion of hydrated protons to balance the charge upon oxidation/reduction of Mn3+/Mn4+ in the film.     

CHOICE OF COATINGS FOR THE OPTICAL ELEMENTS IN THE IRRADIATION SYSTEM OF VACUUM-ULTRAVIOLET RADIATION ABOVE 50 nm

The spectral throughput of a vacuum-ultraviolet irradiation system at the SOR-RING facility was examined with various combinations of aluminum-and gold-coated optical elements in a 2.2-m modified Wadsworth monochromator. We found that the optimum was a combination of an aluminum-coated collimating mirror, concave grating, and plane deflecting mirror, and a combination of a gold-coated collimating mirror, concave grating and an aluminum-coated plane deflecting mirror in the wavelength regions 190-110 nm and 110-50 nm, respectively.     

LIGHT INDUCED FLUORESCENCE SPECTRAL CHANGES IN NATIVE PHYTOCHROME FROM Secale cereale L. AT LIQUID NITROGEN TEMPERATURE

Abstract— Fluorescence spectra of native rye phytochrome were determined under different light conditions at liquid nitrogen temperature. Fluorescence spectrum of the red-light-absorbing form (Pr) had a major peak at about 685 nm (14 600 cm⁻¹) and a broad sub-peak at about 515 nm (19 400 cm⁻¹). The peak height at 685 nm was reduced by irradiation with monochromatic light of 640 nm, and a new peak became obvious at about 702 nm (14250 cm⁻¹). This spectral change was almost completely reversed by subsequent irradiation with 700-nm light. Fluorescence spectrum of the photoequilibrium mixture of Pr and far-red-light absorbing form under continuous red light showed a sharp peak at about 685 nm having a peak height ca. 12% of Pr, and a broad sub-peak at about 508 nm (19 700 cm⁻¹). Light of 730 nm did not reduce the peak height at about 685 nm but induced a new shoulder at about 699 nm (14300 cm⁻¹). Monochromatic light of 640 and 700 nm given following the light of 730 nm could not reverse the spectral change at 699 nm induced by the irradiation with 730-nm light. Fluorescence spectrum of Pr in partially degraded phytochrome was similar to that in native phytochrome but the peak position in the red region was shifted by about 5 nm (100 cm⁻¹) to the blue.     

QUATERNARY STRUCTURE OF PEA PHYTOCHROME I DIMER STUDIED WITH SMALL-ANGLE X-RAY SCATTERING and ROTARY-SHADOWING ELECTRON MICROSCOPY

Abstract— The quaternary structure of pea phytochrome type I (PI) dimer in the red-light-absorbing form was studied by small-angle X-ray scattering (SAXS) technique and rotary-shadowing electron microscopy. Structural parameters for PI 114 kDa chromopeptide dimer and its tryptically digested N-terminal 59 kDa chromopeptide monomer, such as average electron density, molecular volume and the second moment of electron density distribution, were determined in terms of SAXS using the contrast variation method. Furthermore, by means of model simulation for the scattering profiles of the chromopeptides, most plausible structural models for both peptides were constructed. The distance between the chromophoric domains was estimated to be about 70 A in the resultant model for 114 kDa chromopeptide dimer. Furthermore, the model was consistent with the electron-micrographic images of both the intact PI dimer and the PI 114 kDa chromopeptide dimer, so that the N-terminal 7 kDa fragment did not significantly contribute the low-resolution images of the dimer.     

Enantioselective preparation of C-ring fragment of cotylenin A via catalytic asymmetric intramolecular cyclopropanation of α-diazo β-keto ester

A synthetic pathway to the C-ring fragment of cotylenin A which emerged from our retrosynthetic analysis of cotylenin A is described. The catalytic asymmetric intramolecular cyclopropanation (CAIMCP) of the α-diazo-β-keto ester bearing 2,4,6-trimethylphenyl group as the ester part has been found to afford the crystalline product with high ee, which allowed to establish the approach to the C-ring fragment which required ten-pot operations. The developed approach would be beneficial to a large scale synthesis of the C-ring fragment for the total synthesis of cotylenin A.