A screw-shaped alignment of pyrene using m-calix[3]amide

m-Calix[3]amide bearing three pyrenes (1a) was prepared by the condensation reaction of 3-nonylaminobenzoic acid derivative using Ph₃PCl₂. Pyrenyl groups were found to be aligned in the screw-like fashion by m-calix[3]amide as confirmed by the X-ray crystallography. Aromatic proton signals observed at the up-field region in the ¹H NMR spectrum at low temperature indicated that pyrenyl groups in 1a are aligned in close proximity in THF solution. UV–vis absorption and fluorescence emission spectra did not show marked peak shift nor concentration fluorescence quenching compared with reference compounds implying no significant electronic interaction between pyrenyl groups. These results can be explained by the steric effect of the m-calix[3]amide platform. On the other hand, an excimer emission was observed for m-calix[3]amide having a flexible spacer between pyrene and m-calix[3]amide (1b).     

Photoaddressable polymers for liquid crystal alignment

We demonstrate reversible photoinduced in situ reorientation of low molecular mass liquid crystals (LCs) by means of photoaddressable polymers (PAPs). These polymers contain mesogenic azobenzene side chains optimized to reorient cooperatively and effectively upon illumination with polarized light. Various low molecular mass LCs were introduced between two PAP layers and these sandwich devices were tested with respect to stability and reversibility of photoinduced orientation. Dissolution of the PAP layer by the low molecular mass LC was observed for several material combinations and systematically investigated. Different anisotropic dyes were added as fluorescence markers in order to monitor the photoinduced LC orientation. With an optimized material combination, more than 10 reversible reorientation processes could be realized with polarized light of either 514 or 405 nm wavelength, without any reduction in alignment quality. Further, microscopic polarized fluorescence patterns could be produced and erased within short exposure times.     

Challenge to ultra-trace analytical techniques of nuclear materials in environmental samples for safeguards at JAERI: methodologies for physical and chemical form estimation

From a viewpoint of physical and chemical form estimation, ultra-trace analytical techniques of nuclear materials in environmental samples for safeguards have been investigated at Japan Atomic Energy Research Institute. This article deals with (1) an outline of the developed techniques for bulk and particle analyses of uranium and plutonium in the safeguards environmental samples; (2) current R&D on techniques relating to estimation of the physical and chemical form, such as SEM images and EDX spectra for fine particles of nuclear materials and fission track observation applicable to fissile materials; and (3) possible analytical methodologies, as future works, applicable to ultra-trace amounts of nuclear materials in environmental samples.     

Controlling the photochemical reactions of alkenes by light-path length effects of a microchannel reactor

Photoirradiation of Me₂CO–H₂O solution of pent-4-en-1-ol (1a) with a high-pressure mercury lamp in a test tube gave 8-hydroxyoctan-2-one (3a) in 66 % yield along with oxetane (4a) and the isomer (4a′) in 10 % yield. Irradiation of the running Me₂CO–H₂O solution of 1a in the flow system of a microchannel reactor (MCR) gave mainly 4a. The photoreaction of 1,1-diphenylethene (2a) with triethylamine gave a Markovnikov-type adduct (5a) and an anti-Markovnikov-type adduct (6a). The use of the MCR enhanced the production of 5a. These phenomena were explained by the light-path length effects of the MCR.     

Heterodinuclear Lanthanoid‐Containing Polyoxometalates: Stepwise Synthesis and Single‐Molecule Magnet Behavior

Polyoxometalates (POMs) with heterodinuclear lanthanoid cores, TBA₈H₄[{Ln(μ₂‐OH)₂Ln′}(γ‐SiW₁₀O₃₆)₂] ( LnLn′ ; Ln=Gd, Dy; Ln′=Eu, Yb, Lu; TBA=tetra‐n‐butylammonium), were successfully synthesized through the stepwise incorporation of two types of lanthanoid cations into the vacant sites of lacunary [γ‐SiW₁₀O₃₆]^8? units without the use of templating cations. The incorporation of a Ln³⁺ ion into the vacant site between two [γ‐SiW₁₀O₃₆]^8? units afforded mononuclear Ln³⁺‐containing sandwich‐type POMs with vacant sites ( Ln1 ; TBA₈H₅[{Ln(H₂O)₄}(γ‐SiW₁₀O₃₆)₂]; Ln=Dy, Gd, La). The vacant sites in Ln1 were surrounded by coordinating W? O and Ln? O oxygen atoms. On the addition of one equivalent of [Ln′(acac)₃] to solutions of Dy1 or Gd1 in 1,2‐dichloroethane (DCE), heterodinuclear lanthanoid cores with bis(μ₂‐OH) bridging ligands, [Dy(μ₂‐OH)₂Ln′]⁴⁺, were selectively synthesized ( LnLn′ ; Ln=Dy, Gd; Ln′=Eu, Yb, Lu). On the other hand, La1 , which contained the largest lanthanoid cation, could not accommodate a second Ln′³⁺ ion. DyLn′ showed single‐molecule magnet behavior and their energy barriers for magnetization reversal (ΔE/k_B) could be manipulated by adjusting the coordination geometry and anisotropy of the Dy³⁺ ion by tuning the adjacent Ln′³⁺ ion in the heterodinuclear [Dy(μ₂‐OH)₂Ln′]⁴⁺ cores. The energy barriers increased in the order: DyLu (ΔE/k_B=48 K)< DyYb (53 K)< DyDy (66 K)< DyEu (73 K), with an increase in the ionic radii of Ln′³⁺; DyEu showed the highest energy barrier.     

Tubular structures bearing channels in organic crystals composed of adamantane-based macrocycles

Five macrocyclic molecules (1–5) were efficiently synthesized from the dimerization and trimerization of di-substituted adamantane derivatives, which were composed of three different aromatic units and two different linker groups. Three single-crystals were obtained from these macrocyclic molecules, including a set of pseudopolymorphs (3a and 3b) of macrocycle 3 and another macrocycle 5 (5a). Single crystal X-ray analysis revealed that the three monocyclic compounds were rectangular or square in shape with solvent molecules in the cavity. Macrocycle 3 in 3a formed stacks to produce tubular structures with channels that assembled into three-dimensional networks through CH/π interactions.     

Bipolar Electrode-based Electrochromic Devices for Analytical Applications – A Review

Bipolar electrode-based (BPE-based) electrochromic devices have garnered increasing attention in the past decade. These BPE-based electrochromic devices have been used for analytical health monitoring, point-of-care (POC) diagnostics, and chemical sensing. In this review, we highlight recent progress made regarding BPE-based electrochromic devices constructed for these analytical applications. Various, available electrochromic materials are summarized in the first section, after which the different device types (e. g., paper-based and self-powered) are discussed. Biological- and chemical-based analytical demonstrations of these devices are then reviewed. Finally, we conclude this review with a perspective on the future developments of BPE-based electrochromic devices in analytical applications.     

Regulation of Multicolor Fluorescence Changes Found in Donor-acceptor-type Mechanochromic Fluorescent Dyes

The regulation of multicolor fluorescence changes in mechanochromic fluorescence (MCF) remains a challenging task. Herein, we report the regulation of MCF using a donor-acceptor structure. Two crystal polymorphs, BTD-pCHO(O) and BTD-pCHO(R) produced by the introduction of formyl groups to an MCF dye, respond to a mechanical stimulus, allowing a three-color fluorescence change. Specifically, the orange-colored fluorescence of the metastable BTD-pCHO(O) polymorph changed to a deep-red color in the amorphous-like state to finally give a red color in the stable BTD-pCHO(R) polymorph. This change occurred by mechanical grinding followed by vapor fuming. The two different crystal packing patterns were selectively regulated by the electronic effect of the introduced functional groups. The two types of selectively formed crystals in BTD(F)-pCHO bearing fluorine atoms, and BTD(OMe)-pCHO bearing methoxy groups, respond to mechanical grinding, allowing for the regulation of multicolor MCL from a three-color change to two different types of two-color changes.     

Isotopic dependence of the giant monopole resonance in the even-A 112-124Sn isotopes and the asymmetry term in nuclear incompressibility

The strength distributions of the giant monopole resonance (GMR) have been measured in the even-A Sn isotopes (A=112-124) with inelastic scattering of 400-MeV alpha particles in the angular range 0 degrees -8.5 degrees . We find that the experimentally observed GMR energies of the Sn isotopes are lower than the values predicted by theoretical calculations that reproduce the GMR energies in 208Pb and 90Zr very well. From the GMR data, a value of Ktau = -550 +/- 100 MeV is obtained for the asymmetry term in the nuclear incompressibility.