TOT measurement implemented in FPGA TDC

Time measurement plays a crucial role for the purpose of particle identification in high energy physics experiments. With increasingly demanding physics goals and the development of electronics, modern time measurement systems need to meet the requirement of excellent resolution specification as well as high integrity. Based on Field Programmable Gate Arrays(FPGAs), FPGA time-to-digital converters(TDCs) have become one of the most mature and prominent time measurement methods in recent years. For correcting the time-walk effect caused by leading timing, a time-over-threshold(TOT) measurement should be added to the FPGA TDC. TOT can be obtained by measuring the interval between the signal leading and trailing edges. Unfortunately, a traditional TDC can recognize only one kind of signal edge, the leading or the trailing. Generally, to measure the interval, two TDC channels need to be used at the same time, one for leading, the other for trailing. However, this method unavoidably increases the amount of FPGA resources used and reduces the TDC's integrity.This paper presents one method of TOT measurement implemented in a Xilinx Virtex-5 FPGA. In this method,TOT measurement can be achieved using only one TDC input channel. The consumed resources and time resolution can both be guaranteed. Testing shows that this TDC can achieve resolution better than 15 ps for leading edge measurement and 37 ps for TOT measurement. Furthermore, the TDC measurement dead time is about two clock cycles, which makes it good for applications with higher physics event rates.     

超薄金壳包覆NaYF4:Yb,Er@SiO2纳米结构的可控合成与表面增强上转换荧光

利用原位还原法成功制备了尺寸均一、超薄完整金壳包覆的NaYF₄:Yb,Er@SiO₂@Au（NSA）纳米结构,其XRD、TEM、EDX、HRTEM-HAADF、Mapping及吸收光谱表征结果表明,SiO₂壳及纳米金壳的平均厚度分别约为5 nm和2 nm。在980 nm连续激光激发下,系统研究了核壳结构的上转换荧光强度与氯金酸浓度的依赖关系。稳态光谱结果显示,NSA与仅SiO₂包覆样品（NS）相比Er³⁺的红绿荧光强度均增强了~2.8倍。通过分析上转换荧光动力学过程及利用FDTD方法模拟,讨论了表面等离激元增强上转换荧光的机制。     

高压沿面放电烟气脱硫技术动态实验研究

本文针对高压沿面放电活化气体的烟气脱硫技术,在静态实验研究的基础上进行了实验室冷态动态的实验研究。设计了便于反应和测量的动态实验装置。实验解释了电子束法脱硫技术中导致氨气泄漏的部分原因,验证了高压沿面放电脱硫技术可以在较低的运行电压下,达到提高脱硫效率,减少氨气泄漏的作用。     

科研成果转化为近代物理实验教学内容的研究与实践——以“偶氮染料掺杂聚合物薄膜材料光学特性测量”实验为例

科研成果转化为近代物理实验教学内容对于培养学生的创新能力、提高学生的科研素质和科研能力具有重要的作用。本文介绍了"偶氮染料掺杂聚合物薄膜的材料光学特性测量"系列实验的科研背景和教学设计,并进行了教学总结。     

便携式近红外漫反射中药质量监控仪的研制

介绍了便携式近红外漫反射中药质量监控仪的设计思想、基本结构、测试条件和使用方法。该光谱仪具有体积小、重量轻、成本低等特点,现场监控中药质量是非常便利的。     

光致折射晶体中高速调制光束传输和放大的理论研究

本文首次对高速调制光束在先致折射晶体中的耦合进行了理论研究,指出利用光致折射晶体中的双光束耦合可以实现高速调制光束的信息转换和放大,并为实验所证实.     

三硼酸锂晶体的多光子散射

本文报道三硼酸锂(LBO)晶体的瞬态前向相干多光子散射,实验表明LBO晶体内部同时发生x~(2)和x~(3)非线性相互作用过程,而未发现光耦合效应,测量了LBO晶体的光栅寿命上限.     

基于空间光调制器的波面重建优化方法研究

针对不同非球面面形的实时检测需求,研究了基于空间光调制器的标准波面重建技术.基于空间光调制器波面重建的原理设计了干涉测量系统,依据空间光调制器的自身特点选取修正离轴计算全息编码方式实现对标准球波面的编码.针对实验中空间光调制器作为全息再现介质引起重建波面质量下降问题,提出了错位叠加优化方案,并将这一过程进行了模拟实验....     

单纵模671nm红光激光器

利用全波片和Nd:YVO4激光器的偏振特性构成双折射滤光片,使用I类临界相位匹配LBO作为倍频晶体,在注入泵浦功率2.7W的情况下获得149mW的671nm单纵模红光输出,光-光转换率5.6%,该结构简单、紧凑,适合用于中低功率激光器。     

谷物种子中蛋白质含量测定的核反应分析法

分析了在高蛋白质谷物育种中对筛选方法的要求, 对谷物中蛋白质测定的方法进行了综述评价, 重点介绍了用于谷物蛋白质测定的核反应分析法的原理及特点. The requirements of the screening method for high protein content in grain breeding are analysed. Methods for the determination of protein content in grain seed are reviewed.The principle and the advantages of the nuclear reaction method for the measurement of protein content in grain seed are discussed in detail.