Copper(I) and silver(I) complexes of bridging bis(quinaldinyl)phenylphosphine oxide ligand

Abstract

A novel tertiary phosphine oxide containing two quinaldinyl substituents has been synthesized according to adapted literature procedures. Its coordination properties toward Cu(I) and Ag(I) were investigated and the resulting complexes were analyzed by single crystal X-ray diffraction. Multinuclear complexes are formed, wherein the ligand is bridging across two metal centers. Though for the silver complex, no argentophilic interactions are present. The copper complex was characterized further by multinuclear NMR spectroscopy at variable temperatures.     

Clathrate formation in (i-C5H11)4−k (C4H9) k NF−H2O (k=1,2,3) binary systems

Phase diagrams of some binary aqueous systems with tetraalkylammonium fluorides are examined. The size of the hydrophobic moiety of the guest is consecutively varied in the series (i-C₅H₁₁)_4−k(C₄H₉)_kNF (k=0, 1, 2, 3) by replacing bulky isoamyl radicals with n-butyl radicals. Changes in clathrate formation caused by variations of the sizes and forms of guests are analyzed in the series (i-C₅H₁₁)_k−4(C₄H₉)_kNF−H₂O (k=0, 1, 2, 3, 4). All tetraisoamylammonium fluoride hydrates are more stable than other hydrates of this series. The stability of the compounds increases due to the fact that the isoamyl radicals use the host cavities more effectively than the butyl radicals. In all hydrates of the series, tetragonal structures-I (TS-I), which were earlier thought typical only for hydrates of tetrabutylammonium salts, are formed. Hydrates of the orthorhombic system are formed until three isoamyl radicals have been replaced by butyl radicals. Hydrates with 26–28 water molecules (mp 27.4–34.6°C) are the most stable hydrates of the series, except for i-AmBu₃NF·25.9 H₂O, melting 0.3°C lower than the tetragonal hydrate in the same system. All compounds are defined chemically, and for some of them crystal data are given. Institute of Inorganic Chemistry, Siberian Branch, Russian Academy of Sciences. Institute of Physical Chemistry, Polish Academy of Sciences. Translated fromZhurnal Strukturnoi Khimii, Vol. 36, No. 3, pp. 501–508, May–June, 1995. Translated by L. Smolina     

Single wall carbon nanotubes density of states: comparison of experiment and theory

We study the electronic structure of a variety of single wall carbon nanotubes and report density of states obtained with the Perdew–Burke–Ernzerhof (PBE) generalized gradient approximation and hybrid PBE0 approximation of density functional theory using Gaussian orbitals and periodic boundary conditions. PBE gives very good results for metallic tubes but the addition of a portion of exact exchange in the hybrid PBE0 functional worsens the agreement between experiment and theory. On the other hand, the PBE0 hybrid significantly improves the theoretical predictions (compared to PBE) for semiconducting tubes.     

Clathrate formation in binary aqueous systems with CH2Cl2, CHCl3 and CCl4 at high pressures

P,T,X phase diagrams of the CH₂Cl₂-H₂O, the CHCl₃-H₂O and the CCl₄-H₂) systems have been studied by DTA in the pressure range 10^–3 to 5.0 kbar. Under pressure the cubic structure II (CS-II) hydrates forming in all the systems are replaced by hydrates with the composition M·7.3 H₂O whose stoichiometry and positive dT/dP values of melting lead us to believe that they are CS-I hydrates.In the CH₂Cl₂ and CHCl₃ systems the nonvariant point coordinates of the hydrate transformationQ ₂ ^h (l₁h17h7l₂, where l₁ and l₂ are liquid phases abundant in water and hydrate former, respectively, h₁₇ and h₇ are hydrates with hydrate numbers 17 and 7, respectively) areP = 0.6 kbar, T = –1.5°C andP =2.65 kbar,T = –10.5°C, respectively. In the CCl₄ system the 4-phaseQ ₃ ^h point (l₁h₁₇h₇s, where s is crystalline CCl₄) has coordinatesP = 0.75 kbar and T = 0.4°C.The main obstacle of the present study, the very slow achievement of equilibrium, has been eliminated by adding small amounts (0.25% by mass) of surfactants followed by ultrasonic mixing. We have shown that this accelerates the achievement of equilibrium without changing its position.     

Facile one-pot synthesis of BINOL- and H8-BINOL-based aryl phosphites and their use in palladium catalysed asymmetric allylation

Novel P-monodentate aryl phosphite ligands have been synthesised in one step from (R)-BINOL, (R)-H₈-BINOL and (R)-H₈-3,3′-dibromo-BINOL. With the new aryl phosphites, up to 86% ee was observed in the asymmetric Pd-catalysed amination of 1,3-diphenyl-2-propenyl acetate with sodium diformylamide. In the enantioselective alkylation of 1,3-diphenyl-2-propenyl acetate with dimethyl malonate, up to 97% enantioselectivity was achieved.     

Longitudinal (1)H relaxation optimization in TROSY NMR spectroscopy

A general method to enhance the sensitivity of the multidimensional NMR experiments performed at high-polarizing magnetic field via the significant reduction of the longitudinal proton relaxation times is described. The method is based on the use of two vast pools of "thermal bath" 1H spins residing on hydrogens covalently attached to carbon and oxygen atoms in 13C,15N labeled and fully protonated or fractionally deuterated proteins to uniformly enhance longitudinal relaxation of the 1HN spins and concomitantly the sensitivity of multipulse NMR experiments. The proposed longitudinal relaxation optimization is implemented in the 2D [15N,1H]-LTROSY, 2D [15N,1H]-LHSQC and 3D LTROSY-HNCA experiments yielding the factor 2-2.5 increase of the maximal signal-to-noise ratio per unit time at 600 MHz. At 900 MHz, the predicted decrease of the 1HN longitudinal relaxation times can be as large as one order of magnitude, making the proposed method an important tool for protein NMR at high magnetic fields.     

Cyano-bridged hexanuclear Fe4M2 (M = Ni, Co, Mn) clusters: spin-canted antiferromagnetic ordering of Fe4Ni2 cluster

Heterobimetallic hexanuclear cyano-bridged complexes, [{Fe(Tp)(CN)3}4{M(MeCN)(H2O)2}(2)].10H2O.2MeCN [M = Ni (1), Co (2), Mn (3); Tp = hydrotris(1-pyrazolyl)borate], have been synthesized in H2O-MeCN solution. Complexes 1-3 are isostructural and hexanuclear with [{Fe(Tp)(CN)3}4{M(MeCN)(H2O)2}2] units linked by hydrogen bonds to form a 2D-structure in the solid state. Complex 1 is a canted antiferromagnet that undergoes a field-induced spin-flop-like transition at approximately 1 T and 2 K. At 4.45 K 1 has a transition to paramagnetic state of noninteracting S = 4 magnetic clusters. However, 2 and 3 show antiferromagnetic intracluster coupling. Facile loss of solvent from 2 alters the local symmetry resulting in changing the intracluster interaction from antiferro- to ferromagnetic.     

Hydrogen‐bonded frameworks of bis(2‐carboxypyridinium) hexafluorosilicate and bis(2‐carboxyquinolinium) hexafluorosilicate dihydrate

In bis(2‐carboxypyridinium) hexafluorosilicate, 2C₆H₆NO₂⁺·SiF₆²⁻, (I), and bis(2‐carboxyquinolinium) hexafluorosilicate dihydrate, 2C₁₀H₈NO₂⁺·SiF₆²⁻·2H₂O, (II), the Si atoms of the anions reside on crystallographic centres of inversion. Primary inter‐ion interactions in (I) occur via strong N—H...F and O—H...F hydrogen bonds, generating corrugated layers incorporating [SiF₆]²⁻ anions as four‐connected net nodes and organic cations as simple links in between. In (II), a set of strong N—H...F, O—H...O and O—H...F hydrogen bonds, involving water molecules, gives a three‐dimensional heterocoordinated rutile‐like framework that integrates [SiF₆]²⁻ anions as six‐connected and water molecules as three‐connected nodes. The carboxyl groups of the cation are hydrogen bonded to the water molecule [O...O = 2.5533 (13) Å], while the N—H group supports direct bonding to the anion [N...F = 2.7061 (12) Å].     

H-, C-NMR and ethylene polymerization studies of zirconocene/MAO catalysts: effect of the ligand structure on the formation of active intermediates and polymerization kinetics

Using ¹H- and ¹³C-NMR spectroscopies, cationic intermediates formed by activation of L₂ZrCl₂ with methylaluminoxane (MAO) in toluene were monitored at Al/Zr ratios from 50 to 1000 (L₂ are various cyclopentadienyl (Cp), indenyl (Ind) and fluorenyl (Flu) ligands). The following catalysts were studied: (Cp-R)₂ZrCl₂ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu), rac-ethanediyl(Ind)₂ZrCl₂, rac-Me₂Si(Ind)₂ZrCl₂, rac-Me₂Si(1-Ind-2-Me)₂ZrCl₂, rac-ethanediyl(1-Ind-4,5,6,7-H₄)₂ZrCl₂, (Ind-2-Me)₂ZrCl₂, Me₂C(Cp)(Flu)ZrCl₂, Me₂C(Cp-3-Me)(Flu)ZrCl₂ and Me₂Si(Flu)₂ZrCl₂. Correlations between spectroscopic and ethene polymerization data for catalysts (Cp-R)₂ZrCl₂/MAO (R=H, Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu) and rac-Me₂Si(Ind)₂ZrCl₂ were established. The catalysts (Cp-R)₂ZrCl₂/AlMe₃/CPh₃⁺B(C₆F₅)₄⁻ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, n-Bu, t-Bu) were also studied for comparison of spectroscopic and polymerization data with MAO-based systems. Complexes of type (Cp-R)₂ZrMe⁺←Me⁻-Al≡MAO (IV) with different [Me-MAO]⁻ counteranions have been identified in the (Cp-R)₂ZrCl₂/MAO (R=n-Bu, t-Bu) systems at low Al/Zr ratios (50-200). At Al/Zr ratios of 500-1000, the complex [L₂Zr(μ-Me)₂AlMe₂]⁺[Me-MAO]⁻ (III) dominates in all MAO-based reaction systems studied. Ethene polymerization activity strongly depends on the Al/Zr ratio (Al/Zr=200-1000) for the systems (Cp-R)₂ZrCl₂/MAO (R=H, Me, n-Bu, t-Bu), while it is virtually constant in the same range of Al/Zr ratios for the catalytic systems (Cp-R)₂ZrCl₂/MAO (R=1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄) and rac-Me₂Si(Ind)₂ZrCl₂/MAO. The data obtained are interpreted on assumption that complex III is the main precursor of the active centers of polymerization in MAO-based systems.     

Metal-templated diyne cyclodimerization and cyclotrimerization

Reaction of [Pt(CH3)2(COD)] (COD = 1,5-cyclooctadiene) with Ph2PCCCCPPh2 led to a mixture of [{Pt(CH3)2}2(mu-Ph2PC4PPh2)2] (1) and [{Pt(CH3)2}3(mu-Ph2PC4PPh2)3] (2). Reaction of [PtCl2(COD)] with Ph2PCCCCPPh2 led to a mixture of the thermally unstable compounds [{PtCl2}2(mu-Ph2PC4PPh2)2] (3) and [{PtCl2}3(mu-Ph2PC4PPh2)3] (4) which transform into [{PtMe2}2{mu-C8(PPh2)4}] (5) and [{PtMe2}3{mu3-C12(PPh2)6}] (6) containing 8-membered diene-diyne and 12-membered triene-triyne rings, respectively. Compound 2 can be converted to [{PtMe2}3{C12(PPh2)6}] (7) by heating with CuCl at 80 degrees C, while 1 can be heated without significant cycloaddition.