Self-phase-locked degenerate femtosecond optical parametric oscillator

We demonstrated a stable degenerate synchronously pumped femtosecond optical parametric oscillator (SPOPO) as a divide-by-2 subharmonic generator. The SPOPO exhibited passive all-optical self-phase-locking between the pump and signal/idler and thus required no external electronic feedback to produce the phase-locked subharmonic. We employed a type I phase-matched, 1-mm-long, periodically poled MgO:LiNbO3 crystal as the nonlinear gain element and an 80 MHz mode-locked Ti:sapphire laser with 180 fs pulses tuned at 775 nm as the pump. The SPOPO generated transform-limited 70 fs phase-locked output pulses centered at 1550 nm. The self-phase-locking operation was confirmed by separate beat-note measurement techniques with respect to the pump laser and with respect to an external cw laser.     

Quasiuniform in-plane magnetization state of thin cylindrical dots in a square array and related anisotropy

The energy (magnetostatic, exchange, and Zeeman terms) of a square array of cylindrical submicron dots made of soft ferromagnetic material is calculated analytically and minimized, taking into account the quasiuniformity of dot magnetization. The dependence of the equilibrium energy of the array on the direction of the externally applied magnetic field in the array plane is recovered, exhibiting the fourfold anisotropy. The anisotropy constant is calculated. Its values for different array geometries are in excellent agreement with the recent independent experiments. A new eightfold anisotropy effect is predicted. The theory involves no adjustable parameters.     

Ionization penalty in nonlinear Raman neuroimaging

Light-assisted ionization accompanying coherent anti-Stokes Raman scattering (CARS) of ultrashort laser pulses in brain tissue is shown to manifest itself in a detectable blueshift of the anti-Stokes signal. This blueshift can serve as an indicator of ionization processes in CARS-based neuroimaging.     

Signal beating elimination using single-mode fiber to multimode fiber coupling

We experimentally demonstrate an all-passive fiber-based approach to prevent undesired beating during signal merging and detection. Beating occurs when optical signals of very close or the same wavelength are combined at a coupler and detected using a photodetector. Our approach is based on signal coupling from several single-mode fibers to a single piece of multimode fiber without interference, such that different signals propagate in different modes with different spatial positions inside the multimode fiber. We have investigated signal beating when the signals are coherent, partially coherent, or incoherent with each other. The measured results for single-mode to multimode coupling show signal beating is substantially reduced, resulting in widely opened eye diagrams and error-free bit error rate performance.     

A wet chemical preparation of transparent conducting thin films of Al-doped ZnO nanoparticles

A wet chemical deposition method for preparing transparent conductive thin films on the base of Al-doped ZnO (AZO) nanoparticles has been demonstrated. AZO nanoparticles with a size of 7 nm have been synthesised by a simple precipitation method in refluxed conditions in ethanol using zinc acetate and Al-isopropylate. The presence of Al in ZnO was revealed by the EDX elemental analysis (1.8 at.%) and UV–Vis spectroscopy (a blue shift due to Burstein–Moss effect). The obtained colloid solution with the AZO nanoparticles was used for preparing by spin-coating thin films on glass substrates. The film demonstrated excellent homogeneity and transparency (T > 90%) in the visible spectrum after heating at 400 °C. Its resistivity turned to be excessively high (ρ = 2.6 Ω cm) that we ascribe to a poor charge percolation due to a high film porosity revealed by SEM observations. To improve the percolation via reducing the porosity, a sol–gel solution was deposited “layer-by-layer” in alternation with layers derived from the AZO colloid followed by heating. As it was shown by optical spectroscopy measurements, the density of thus prepared film was increased more than twice leading to a significant decrease in resistivity to 1.3 × 10⁻² Ω cm.     

Magnetic configurations of hybrid ferromagnetic dot–superconductor systems

In-plane single domain and vortex magnetization configurations of the magnetic dot in the hybrid superconductor–ferromagnet system are considered. Single domain configuration energy shift due to the presence of superconductor is calculated. The change of the phase curve of the ferromagnetic dot magnetization due to the repulsion of the magnetic field by the superconductor is obtained. Up to the two-fold decrease of the ferromagnetic dot critical radius due to the presence of the superconductor is predicted.     

The system Na2CO3–CaCO3–MgCO3 at 6 GPa and 900–1250°C and its relation to the partial melting of carbonated mantle

In order to constrain the Na₂CO₃–CaCO₃–MgCO₃ T–X diagram at 6?GPa in addition to the binary and pseudo-binary systems we conducted experiments along the Na₂CO₃–Ca_0.5Mg_0.5CO₃ join. At 900–1000°C, melting does not occur and isothermal sections are presented by one-, two- and three-phase regions containing Ca-bearing magnesite, aragonite, Na₂CO₃ (Na₂) and Na₂(Ca_1–0.9Mg_0-0.1)_3-4(CO₃)_4-5 (Na₂Ca_3-4), Na₄(Ca_1–0.6Mg_0–0.4)(CO₃)₃ (Na₄Ca), Na₂(Ca_0-0.08Mg_1–0.92)(CO₃)₂ (Na₂Mg) phases with intermediate compositions. The minimum melting point locates between 1000°C and 1100°C. This point would resemble that of three eutectics: Mgs–Na₂Ca₃–Na₂Mg, Na₂Mg–Na₂Ca₃–Na₄Ca or Na₂Mg–Na₄Ca–Na₂, in the compositional interval of [45Na₂CO₃·55(Ca_0.6Mg_0.4)CO₃]–[60Na₂CO₃·40Ca_0.6Mg_0.4CO₃]. The liquidus projection has seven primary solidification phase regions for Mgs, Dol, Arg, Na₂Ca₃, Na₄Ca, Na₂ and Na₂Mg. The results suggest that extraction of Na and Ca from silicate to carbonate components has to decrease minimum melting temperature of carbonated mantle rocks to 1000–1100°C at 6?GPa and yields Na-rich dolomitic melt with a Na# (Na₂O/(Na₂O?+?CaO?+?MgO))?≥?28?mol%.     

Formation of pits during growth of Si/Ge nanostructures

Alternating deposition of Ge and Si in the step-flow growth regime using Bi acting as a surfactant can lead to a spontaneous formation of one atomic layer deep pits in the area of surface covered by Ge. During Si growth Ge atoms of the epitaxial 2D Ge layer move to Si step edges where stronger bonds with Si atoms are formed. Appropriate growth conditions can suppress or enhance the pit formation effect and consequently a new type of self-organized nanostructures can be formed.     

Aerobic asymmetric oxygenation catalysis: a well forgotten… future?

1. Download : Download high-res image (83KB)
2. Download : Download full-size image

     

Unusual stereoselectivity of methionine-γ-lyase from Citrobacterfreundii toward diastereomeric (S)-methionine S-oxide

1. Download : Download high-res image (77KB)
2. Download : Download full-size image