Anionic polymerization of butadiene: A MNDO study of the potential energy surface of the propagation reaction in polar and non-polar media

The anionic polymerization of butadiene, to both the 1,2- and 1,4-addition products, is an important industrial process. It is known that the reaction can be steered to either the 1,2- or 1,4-product by the addition, or absence, of a complexing solvent such as ether. The goals of the current study were to map the MNDO Potential Energy Surfaces (PES) of the propagation reactions both in the presence and absence of dimethyl ether to gain insight into the factors influencing the reaction's selectivity. Single point ab initio calculations at the DZP level were run on all reactants, products and transition states as a cross check on the MNDO results.     

Development of an Inhibition Enzyme-Linked Immunosorbent Assay (ELISA) Prototype for Detecting Cytotoxic Three-Finger Toxins (3FTxs) in African Spitting Cobra Venoms

The administration of toxin-specific therapy in snake envenoming is predicated on improved diagnostic techniques capable of detecting specific venom toxins. Various serological tests have been used in detecting snakebite envenoming. Comparatively, enzyme-linked immunosorbent assay (ELISA) has been shown to offer a wider practical application. We report an inhibition ELISA for detecting three-finger toxin (3FTx) proteins in venoms of African spitting cobras. The optimized assay detected 3FTxs in N. ashei (including other Naja sp.) venoms, spiked samples, and venom-challenged mice samples. In venoms of Naja sp., the assay showed inhibition, implying the detection of 3FTxs, but showed little or no inhibition in non-Naja sp. In mice-spiked samples, one-way ANOVA results showed that the observed inhibition was not statistically significant between spiked samples and negative control (p-value = 0.164). Similarly, the observed differences in inhibition between venom-challenged and negative control samples were not statistically significant (p-value = 0.9109). At an LOD of 0.01 µg/mL, the assay was able to confirm the presence of 3FTxs in the samples. Our results show a proof of concept for the use of an inhibition ELISA model as a tool for detecting 3FTxs in the venoms of African spitting cobra snakes.     

Antimicrobial Activities of Plant Extracts against Solanum tuberosum L. Phytopathogens

The purpose of the study was to select an environmentally friendly plant biopesticide to protect seed potatoes against phytopathogens. The scope included the evaluation of the antimicrobial activities of 22 plant water extracts, 22 water-glycol extracts, and 3 subcritical carbon dioxide extracts using the agar diffusion method against 10 potato phytopathogens. For the most effective extracts, minimal inhibitory concentration (MIC), chemical composition analysis by gas chromatography–mass spectrometry and in situ assays on seed potatoes were performed. Garlic water extract was finally selected as the most effective in phytopathogen growth inhibition, both in vitro and in situ, with MIC values ranging between 6.3–25 mg/mL. 5-Hydroxymethylfurfural was determined to be the main component of this extract (33.24%). Garlic water extract was proposed as a potential biopesticide against potato phytopathogens.     

Über das Eulersche Summierungsverfahren

Ohne Zusammenfassung     

Über die partiellen Differentialgleichungen der schwingenden Saiten und Membranen

Ohne Zusammenfassung     

Large antipodal families

A family {A _i | i ∈ I} of sets in ℝ ^d is antipodal if for any distinct i, j ∈ I and any p ∈ A _i , q ∈ A _j , there is a linear functional ϕ:ℝ ^d → ℝ such that ϕ(p) ≠ ϕ(q) and ϕ(p) ≤ ϕ(r) ≤ ϕ(q) for all r ∈ ∪ _i∈I A _i . We study the existence of antipodal families of large finite or infinite sets in ℝ³. The research was supported by the Hungarian-South African Intergovernmental Scientific and Technological Cooperation Programme, NKTH Grant no. ZA-21/2006 and South African National Research Foundation Grant no. UID 61853, as well as Hungarian National Foundation for Scientific Research Grants no. NK 67867, no. T47102, and no. K72537.     

Carbon incorporation in Pd(111) by adsorption and dehydrogenation of ethene

The decomposition of ethene on the Pd(111) surface was studied at effective pressures in the 10(-8) to 10(-7) mbar range and at sample temperatures between 300 and 700 K, using an effusive capillary array beam doser for directional adsorption, LEED, AES, temperature programmed reaction, and TDS. In the temperature range of 350-440 K increasingly stronger dehydrogenation of the ethene molecule is observed. Whereas at 350 K an ethylidyne adlayer is still present after adsorption, already at temperatures around 440 K complete coverage of the surface by carbon is attained, while the bulk still retains the properties of pure Pd. Beyond 440 K a steady-state surface C coverage is established, which decreases with temperature and is determined by detailed balancing between the ethene gas-phase adsorption rate and the migration rate of carbon into the Pd bulk. This process gives rise to the formation of a "partially carbon-covered Pd(x)C(y) surface". Above 540 K the surface-bulk diffusion of adsorbed carbon becomes fast, and in the UHV experiment the ethene adsorption rate becomes limited by the ethene gas-phase supply. The carbon bulk migration rate and the steady-state carbon surface coverage were determined as a function of the sample temperature and the ethene flux. An activation energy of 107 kJ mol(-1) for the process of C diffusion from surface adsorption sites into the subsurface region was derived in the temperature range of 400-650 K by modeling the C surface coverage as a function of temperature on the basis of steady-state reaction kinetics, assuming a first-order process for C surface-subsurface diffusion and a second-order process for C(ads) formation by dissociative C2H4 adsorption.     

Protection‐Group‐Free Synthesis of Sequence‐Defined Macromolecules via Precision λ‐Orthogonal Photochemistry

An advanced light‐induced avenue to monodisperse sequence‐defined linear macromolecules via a unique photochemical protocol is presented that does not require any protection‐group chemistry. Starting from a symmetrical core unit, precision macromolecules with molecular weights up to 6257.10 g mol^?1 are obtained via a two‐monomer system: a monomer unit carrying a pyrene functionalized visible light responsive tetrazole and a photo‐caged UV responsive diene, enabling an iterative approach for chain growth; and a monomer unit equipped with a carboxylic acid and a fumarate. Both light‐induced chain growth reactions are carried out in a λ‐orthogonal fashion, exciting the respective photosensitive group selectively and thus avoiding protecting chemistry. Characterization of each sequence‐defined chain (size‐exclusion chromatography (SEC), high‐resolution electrospray ionization mass spectrometry (ESI‐MS), and NMR spectroscopy), confirms the precision nature of the macromolecules.     

Simulation of a mixed-conducting membrane-based gas turbine power plant for CO<Subscript>2</Subscript> capture: system level analysis of operation stability and individual process unit degradation

A gas turbine power plant for CO₂ capture, based on oxygen-permeable membranes with mixed ionic-electronic conductivity, was analysed with respect to long-term stability by means of numerical simulation. Due to the attractive transport and physicochemical properties of mixed-conducting La₂NiO_4+δ, this nickelate was selected as a prototype membrane material for this application. Experiments showed very slow degradation of La₂NiO_4+δ membranes at oxygen chemical potentials close to atmospheric conditions, which are associated with kinetic demixing and other microstructure-related factors. Interaction with CO₂ in the intermediate temperature range also leads to lower oxygen permeation, whilst increasing oxygen pressure may cause partial phase decomposition and microstructural changes, thus again limiting the range of possible operation conditions. The relevant operational constraints were included in a detailed membrane-based gas turbine power plant model. The membrane performance degradation with time was approximated by a linear function with average rate of 3.3% per 1,000 operation hours. Furthermore, performance deterioration of the gas turbine compressor and turbine were also considered. Simulations revealed that the power plant is substantially affected by degradation of the ceramic membranes and turbomachinery components. The already rather small operating window was further narrowed when compared with a conventional gas turbine power plant. Two different designs of the membrane-based power plant were analysed: (1) with and (2) without additional combustors (afterburners) between the membrane reactor and the gas turbine. Afterburners increase thermal efficiency as well as power output, but also lead to non-negligible CO₂ emissions. In order to have a frame of comparison, results for a conventional gas turbine power plant with degradation of turbomachinery components are also presented. Simulations representing changes in ambient temperature and fuel composition as well as failure incidents were executed to analyse the susceptibility of the gas turbine power plant to external and internal changes.     

Hydrogen bonds and local symmetry in the crystal structure of gibbsite

First‐principles quantum mechanical calculations of NMR chemical shifts and quadrupolar parameters have been carried out to assign the ²⁷Al MAS NMR resonances in gibbsite. The ²⁷Al NMR spectrum shows two signals for octahedral aluminum revealing two aluminum sites coordinated by six hydroxyl groups each, although the crystallographic positions of the two Al sites show little difference. The presence of two distinguished ²⁷Al NMR resonances characterized by rather similar chemical shifts but quadrupolar coupling constants differing by roughly a factor of two is explained by different character of the hydrogen bonds, in which the hydroxyls forming the corresponding octahedron around each aluminum site, are involved. The Al‐I site characterized by a C_Q = 4.6 MHz is surrounded by OH? groups participating in four intralayer and two interlayer hydrogen bonds, while the Al‐II site with the smaller quadrupolar constant (2.2 MHz) is coordinated by hydroxides, of which two point toward the intralayer cavities and four OH‐bonds are aligned toward the interlayer gallery. In high‐resolution solid‐state ¹H CRAMPS (combination of rotation and multiple‐pulse spectroscopy) four signals with an intensity ratio of 1:2:2:1 are resolved which allow to distinguish six nonequivalent hydrogen sites reported in the gibbsite crystal structure and to ascribe them to two types of structural OH groups associated with intralayer and interlayer hydrogen bonds. This study can be applied to characterize the gibbsite‐like layer—intergallery interactions associated with hydrogen bonding in the more complex systems, such as synthetic aluminum layered double hydroxides. Copyright © 2010 John Wiley & Sons, Ltd.