Metal‐Xenon Complexes

Long after the first isolation of a xenon compound in 1962 the first compounds with metal‐xenon bonds are prepared. The metal atoms are so far Au and Hg. The most stable metal xenon compounds decompose under loss of xenon slightly above room temperature. They can only exist if solvents and counter ions are weaker bases than atomic xenon. Solvents and counter ions used so far are HF, (SbF₆)^—, and (Sb₂F₁₁)^—.     

Rates of base-catalysed cleavage of pyridyl-, quinolyl-, picolyl- and (quinolylmethyl)-trimethylsilanes

Rates of cleavage of some picoyl- and (quinolylmethyl)-trimethylsilanes (RSiMe₃, where R = PyCH₂ or QnCH₂SiMe₃) have been measured in “90%” aqueous methanolic sodium methoxide at 50°C. Relative reactivities are: 2-PyCH₂, 1.0; 3-PyCH₂, 0.030; 4-PyCH₂, 8.9; 2-QnCH₂, 41; 3-QnCH₂, 0.161; 4-QnCH₂, 37. The rates correlate well with those for base-catalysed hydrogen-exchange in the parent carbon acids RH. Approximate pK_a's (based on the scale of ion-pair acidities in CsNHC₆H₁₁H₂NC₆H₁₁, with pK_a of 9-phenylfluorene = 18.6) for the carbon acids, RH, can be derived as follows: 2-PyCH₃, 29.5; 3-PyCH₃, 34; 4-PyCH₃, 27; 2-QnCH₃, 25; 3-QnCH₃, 32; 4-QnCH₃, 25.Rates of cleavage of pyridyl- and quinolyl-trimethylsilanes (PySiMe₃ and QnSiMe₃) by sodium hydroxide in 4 : 1 v/v Me₂SO/H₂O at 50°C have also been measured; and the relative reactivities are: 2-Py, 1.0; 3-Py, 2.9; 4-Py, 8.4; 2-Qn, 15.9; 3-Qn, 12.7; 4-Qn, 184. The sequence of reactivity differes from that for base-catalysed hydrogen-exchange at the relevant positions of pyridine and quinoline, indicating that the reactivities are not determined in both cases (if in either) solely by the stabilities of the corresponding carbanions.     

Quantitative on-line high-resolution NMR spectroscopy in process engineering applications

In many technical processes, complex multicomponent mixtures have to be handled, for example, in reaction or separation equipment. High-resolution NMR spectroscopy is an excellent tool to study these mixtures and gain insight in their behavior in the processes. For on-line studies under process conditions, flow NMR probes can be used in a wide range of temperature and pressure. A major challenge in engineering applications of NMR spectroscopy is the need for quantitative evaluation. Flow rates, recovery times, and other parameters of the on-line NMR experiments have to be optimized for this purpose. Since it is generally prohibitive to use deuterated solvents in engineering applications, suitable techniques for field homogenization and solvent signal suppression are needed. Two examples for the application of on-line NMR spectroscopic experiments in process engineering are presented, studies on chemical equilibria and reaction kinetics of the technically important system formaldehyde-water-methanol and investigations on reactive gas absorption of CO(2) in aqueous solutions of monoethanolamine.     

Effect of Substituents and of Wavelength of Irradiation on the Photo-Fries-Rearrangement of Enol-Esters Preliminary Communication

Enol-esters 1a-1e undergo clean Photo-Fries-rearrangements without side reactions. With anthroyl derivatives the reaction is observed only at 254 nm, not at 366 nm.     

The trigonal–bipyramidal triiodo­thallium(III) complex [TlI3{(CH3)2SO}2]

The title compound, bis(dimethyl sulfoxide)triiodo­thallium(III), [TlI₃(C₂H₆OS)₂], was crystallized from equimolar amounts of Tl^II and I₂ in a dimethyl sulfoxide (DMSO) solution. After the initial redox reaction, the thallium(III)–iodo complex forms and precipitates as a DMSO solvate. In the crystal structure, Tl is surrounded by three iodide ligands in the equatorial plane and two O‐coordinated DMSO mol­ecules in the axial positions, forming a slightly distorted trigonal bipyramid. The complex lies on a twofold rotation axis, making the DMSO mol­ecules and two of the I atoms crystallographically equivalent.     

1,3-Dipolare Addition von 2-Benzonitrilio-2-propanid an 7-Methylthieno[2,3-c]pyridin-1,1-dioxid und Folgereaktionen

1,3-Dipolar Addition of 2-Benzonitrilio-2-propanid to 7-Methylthieno[2,3-c]pyridine 1,1-Dioxide and Subsequent Reactions The addition of dipole 2 , generated photochemically from 2,2-dimethyl-3-phenyl-2H-azirine ( 1 ), to 7-methylthieno[2,3-c]pyridine 1,1-dioxide yields the pyrroline derivative 4 as a major product and regioisomer 5 in low yield. Compound 4 can be transformed into the pyrrolidine derivative 11 by ring opening, loss of SO₂ and hydrogenation. Bromopyrroline derivative 14 gives either by dehydrohalogenation compound 18 or, by substitution, nitrile 17 or ethoxy derivative 19 . Substitution of 14 and ring opening yields methoxypyrrole derivative 20 , which gives access to the unstable hydroxypyrrole and hydroxypyrrolidine derivative 28 resp. 30 . The vinylsulfone 18 is the starting material for addition-ring-cleavage reactions. Oxidation of pyrroline derivative 4 gives epoxy-substituted N-oxide 39 and di-N-oxide 40 ; and oxidative transformation of pyrrolidine derivative 11 yields the (hydroxymethyl)pyridylpyrrolidine derivative 45 .     

Zwitterionic titanoxanes {Cp[η-C5H4B(C6F5)3]Ti}2O and {(η-PrC5H4)[η-1,3-PrC5H3B(C6F5)3]Ti}2O as catalysts for cationic ring-opening polymerization

Zwitterionic titanoxanes {Cp[η⁵-C₅H₄B(C₆F₅)₃]Ti}₂O (I) and {(η⁵-ⁱPrC₅H₄)[η⁵-1,3-ⁱPrC₅H₃B(C₆F₅)₃]Ti}₂O (II), which contain two positively charged Ti(IV) centres in the molecule, are able to catalyse the ring-opening polymerization of -caprolactone (-CL) in toluene solution and in bulk. The process proceeds with a noticeable rate even at room temperature and accelerates strongly on raising the temperature to 60 °C. The best results have been obtained on carrying out the reaction in bulk. Under these conditions, the use of I as a catalyst (-CL:I = 1000:1) gives at 60 °C close to quantitative yield of poly--CL with the molecular mass of 197 000. An increase in the -CL:I ratio to 6000:1 increases the molecular mass of poly--CL to 530 000. Tetrahydrofuran (THF) is also polymerized under the action of I albeit with a lesser rate. However, the molecular mass of the resulting poly-THF can reach rather big values under optimal conditions (up to 217 000 at 20 °C and the THF:I ratio of 770:1). A rise in the reaction temperature from 20 to 60 °C results here to a decrease in the efficiency of the process. Titanoxane II is close to I in its catalytic activity in the -CL polymerization but it is much less active in the polymerization of THF. Propylene oxide (PO), in contrast to -CL and THF, gives with I only liquid oligomers in wide temperature and PO:I molar ratio ranges (−30 to +20 °C, PO:I = 500–2000:1). γ-Butyrolactone and 1-methyl-2-pyrrolidone are not polymerized under the action of I at room temperature. The reactions found are the first examples of catalysis of the cationic ring-opening polymerization by zwitterionic metallocenes of the group IVB metals.     

The platinum catalyst [bpyrPtCl2] in superacidic solution

The methane oxidation catalyst [bpyrPtCl(2)] (bpyr = bis-pyrimidine) dissolves in superacidic HF/SbF(5) solution under formation of a dinuclear cation [H(2)bpyrPt(mu-Cl)(2)PtbpyrH(2)](6+). Two crystal forms are isolated, [Pt(2)Cl(2)bpyr(2)H(4)](6+)(SbF(6)(-))(4)(Sb(2)F(11)(-))(2).2HF (I) (triclinic, Ponemacr;, a = 814.8(2) pm, b = 1444.8(3) pm, c = 2300.5(5) pm, alpha = 89.627(4) degrees, beta = 84.285(4) degrees, gamma = 84.665(4) degrees, Z = 2) and [Pt(2)Cl(2)bpyrH(4)](6+)(Sb(2)F(11)(-))(6).4HF (II) (triclinic, Ponemacr;, a = 879.4(2) pm, b = 1170.4(3) pm, c = 1789.9(5) pm, alpha = 95.37(2) degrees, beta = 99.97(2) degrees, gamma = 100.41(2) degrees, Z = 1). The cation in I has an angle of 148.4(1) degrees between the two square plane platinum environments, while the cation in II is fully planar. The non-platinum-bound nitrogen atoms are all protonated in the superacidic medium.     

Zur Photochemie von Allylaryläthern. 55. Mitteilung über Photoreaktionen

The photochemical reactions of different allyl aryl ethers (Scheme 3) were investigated in hydrocarbons (Chap. 3.1) and in alcoholic solvents (Chap. 3.2). The composition of the photoproducts depended very much on the nature of the solvent. Irradiation (3–95 h) of different methyl substituted allyl aryl ethers ( 1, 3, 5, 7 and 11 ) with a low pressure mercury lamp (λ_Emiss. = 254 nm; 6 or 15 Watt) under argon (quartz vessel) resulted in the formation of 2-, 3– and 4-substituted phenols, dienones and products of consecutive reactions (Tables 1–4 and 6). The results suggested that all products were formed by homolytic cleavage of the C? O bond in the singlet state of the ethers to intermediate radical-geminates (Scheme 5) followed by radical recombination of the two fragments. No products were formed by concerted processes (Table 5, Schemes 5 and 6). Upon irradiation of allyl aryl ethers lacking alkyl substituents at position 4 ( 1 and 5 ) in protic solvents, mainly 2- and 4-allylated phenols were obtained (Tables 1 and 4); 3-allylated phenols were formed only in small amounts (0.02%). However, in aromatic hydrocarbons or cyclohexane 3-allylated phenols were obtained from 1 , 5 and 11 in significant amounts (3–11%; Tables 1, 4 and 6). E.g., upon irradiation of allyl-2,6-dimethyl-2,4-cyclohexadien-1-one ( 6 ) besides 3- and 4-allyl-2, 6-dimethyl-phenol ( 23 and 24 ). Irradiation of 5 in methanol afforded 23 and 6 only in traces, whereas 24 was the main product.     

Biosynthesis of flavocoenzymes

The biosynthesis of one riboflavin molecule requires one molecule of GTP and two molecules of ribulose 5-phosphate. The imidazole ring of GTP is hydrolytically opened, yielding a 2,5-diaminopyrimidine that is converted to 5-amino-6-ribitylamino-2,4(1H,3H)-pyrimidinedione by a sequence of deamination, side chain reduction, and dephosphorylation. Condensation of 5-amino-6-ribitylamino-2,4(1H,3H)-pyrimidinedione with 3,4-dihydroxy-2-butanone 4-phosphate obtained from ribulose 5-phosphate affords 6,7-dimethyl-8-ribityllumazine. Dismutation of the lumazine derivative yields riboflavin and 5-amino-6-ribitylamino-2,4(1H,3H)-pyrimidinedione, which is recycled in the biosynthetic pathway. The enzymes of the riboflavin pathway are potential targets for antibacterial agents.