Visible light-induced hydroxyalkylation of 2H-benzothiazoles with alcohols via selectfluor oxidation

A visible-light induced metal-free approach was described for the hydroxyalkylation of 2H-benzothiazoles with alcohols by using selectfluor as the oxidant. A variety of 2H-benzothiazoles and alcohols could be tolerated, providing a mild and simple method for the synthesis of C2-hydroxyalkylated 2H-benzothiazoles in moderate to good yields. Besides, ethers were also compatible in this reaction, leading to corresponding C2 ether-substituted 2H-benzothiazoles with high regioselectivity.     

Rate sensitivity and deformation mechanism of semi-crystalline polymers during instrumented indentation

Instrumented indentation tests using both constant loading rate (CLR) and continuous stiffness measurement (CSM) operation modes were performed to investigate the deformation mechanism and their sensitivity to the deformation rate in semi-crystalline polymers through the quantitative analysis of load-depth loading and unloading curves. The strain rate was constant during the CSM tests, while the strain rate decreased with the increasing of loading time in CLR tests. The mechanical response mechanism of the semi-crystalline polymers to these tests was very complicated because of the combined effects of strain-hardening in the crystal phase and strain-softening in the amorphous phase. Results show that the loading index m reflects the strain-hardening or strain-softening response during indentation. When m > 2, the mechanical response was due to the strain-hardening, and when m < 2, the response was due to strain-softening. A method based on the measured contact hardness was proposed to obtain the unloading stiffness, and the other mechanical parameters could then be determined according to the unloading stiffness.     

Comprehensive Mechanism for CO Electroreduction on Dual-Atom-Catalyst-Anchored N-Doped Graphene

Carbon neutrality has drawn increasing attention for realizing the carbon cyclization and reducing the greenhouse effect. Although the C1 products, such as CO, can be achieved with a high Faraday efficiency, the targeted production of C2 fuels as well as the mechanism have not been systematically investigated. In this work, we carry out a first-principles study to screen dual-atom catalysts (DACs) for producing C2 fuels through the electrocatalytic carbon monoxide reduction reaction (e-CORR). We find that methanol, ethanol and ethylene can be produced on both DAC−Co and DAC−Cu, while acetate can be achieved on DAC−Cu only. Importantly, methanol and ethylene are preferred on DAC−Co, while acetate and ethylene on DAC−Cu. Furthermore, we show that the explicit solvent can enhance the adsorption and influence the protonation steps, which subsequently affects the protonation and dimerization behavior as well as the performance and selectivity of e-CORR on DACs. We further demonstrate that the C−C coupling is easy to be formed and stabilized if the Integrated Crystal Orbital Hamilton Population (ICOHP) is low because of the low energy barrier. Our findings provide not only guidance on the design of novel catalysts for e-CORR, but an insightful understanding on the reduction mechanism.     

Cobalt and nitrogen atoms co-doped porous carbon for advanced electrical double-layer capacitors

Electrical double-laye r capacitors are widely concerned fo r their high power density,long cycling life and high cycling efficiency.However,their wide application is limited by their low energy density.In this study,we propose a simple yet environmental friendly method to synthesize cobalt and nitrogen atoms co-doped porous carbon(CoAT-NC) material.Cobalt atoms connected with primarily pyridinic nitrogen atoms can be uniformly dispersed in the amorphous carbon matrix,which is benefit for improving electrical conductivity and density of states of the carbon material.Therefore,an enhanced perfo rmance is expected when CoAT-NC is served as electrode in a supercapacitor device.CoAT-NC displays a good gravimetric capacitance of 160 F/g at 0.5 A/g combing with outstanding capacitance retention of 90% at an extremely high current density of 100 A/g in acid electrolyte.Furthermore,a good energy density of30 Wh/kg can be obtained in the organic electrolyte.     

Bioactivity-Guided Isolation of Phytochemicals from Vaccinium dunalianum Wight and Their Antioxidant and Enzyme Inhibitory Activities

Vaccinium dunalianum Wight, usually processed as a traditional folk tea beverage, is widely distributed in the southwest of China. The present study aimed to investigate the antioxidant, α-glucosidase and pancreatic lipase inhibitory activities of V. dunalianum extract and isolate the bioactive components. In this study, the crude extract (CE) from the buds of V. dunalianum was prepared by the ultrasound-assisted extraction method in 70% methanol and then purified with macroporous resin D101 to obtain the purified extract (PM). Five fractions (Fr. A–E) were further obtained by MPLC column (RP-C18). Bioactivity assays revealed that Fr. B with 40% methanol and Fr. D with 80% methanol had better antioxidant with 0.48 ± 0.03 and 0.62 ± 0.01 nM Trolox equivalent (TE)/mg extract for DPPH, 0.87 ± 0.02 and 1.58 ± 0.02 nM TE/mg extract for FRAP, 14.42 ± 0.41 and 19.25 ± 0.23 nM TE/mg extract for ABTS, and enzyme inhibitory effects with IC₅₀ values of 95.21 ± 2.21 and 74.55 ± 3.85 for α-glucosidase, and 142.53 ± 11.45 and 128.76 ± 13.85 µg/mL for pancreatic lipase. Multivariate analysis indicated that the TPC and TFC were positively related to the antioxidant activities. Further phytochemical purification led to the isolation of ten compounds (1–10). 6-O-Caffeoylarbutin (7) showed significant inhibitory effects on α-glucosidase and pancreatic lipase enzymes with values of 38.38 ± 1.84 and 97.56 ± 7.53 µg/mL, and had the highest antioxidant capacity compared to the other compounds.     

Organosulfur-functionalized Au, Pd, and Au-Pd nanoparticles on 1D silicon nanowire substrates: preparation and XAFS studies

A hybrid preparative method was developed to prepare organosulfur-functionalized Au nanoparticles (NPs) on silicon nanowires (SiNWs) by reacting HAuCl(4) with SiNW in the presence of thiol. A number of organosulfur molecules-dodecanethiol, hexanethiol, 1,6-hexanedithiol, and tiopronin-were used to functionalize the Au surface. Size-selected NPs ranging from 1.6 to 7.5 nm were obtained by varying the S/Au ratio and the concentration of HAuCl(4). This method was further extended to the preparation Pd and Pd-Au bimetallic NPs on SiNWs. The morphology of the metal nanostructures was examined by transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The local structure and bonding of the SiNW-supported metal nanostructures were studied using X-ray absorption fine structures (XAFS) [including both X-ray near-edge structures (XANES) and extended X-ray absorption fine structures (EXAFS)] at the Au L(3)-, Pd K-, S K-, and Si K-edges. It was also found that the annealing of the thiol-capped Au NPs up to 500 degrees C transforms the surface of the thiol-capped NPs to gold sulfide, as identified using Au L(3)- and S K-edge XANES. We also illustrate that this preparative approach can be used to form size-controllable Au NPs on carbon nanotubes.     

Studies on the refolding of the reduced-denatured insulin with size exclusion chromatography

The refolding of the reduced-denatured insulin from bovine pancreas was investigated with the size exclusion chromatography (SEC). It was shown that the reduced-denatured insulin originally denatured with 7.0 mol L^?1 guanidine hydrochloride (GuHCI) or 8.0 mol L^?1 urea could not be refolded with a non-oxidized mobile phase. Although the oxidized and reduced glutathione (GSSG and GSH) were employed in the oxidized mobile phase, the reduced-denatured insulin still could not be renatured. However, in the presence of 2.0 mol L^t-1 urea in the oxidized mobile phase employed, the reduced-denatured insulin can be refolded with SEC, and the aggregation of denatured insulin can be diminished by urea. In addition, the disulfide exchange of reduced-denatured insulin also can be accelerated with GSSG/GSH in the oxidized mobile phase. The three disulfide bridges of insulin were formed correctly and the reduced-unfolded insulin can be renatured completely. The results were further tested with reversed-phase liquid chromatography (RPLC) and hydrophobic interaction chromatography (HIC).     

A hierarchical porous carbon membrane from polyacrylonitrile/polyvinylpyrrolidone blending membranes:Preparation,characterization and electrochemical capacitive performance

Novel hierarchical porous carbon membranes were fabricated through a simple carbonization procedure of well-defined blending polymer membrane precursors containing the source of carbon polyacrylonitrile （PAN） and an additive of polyvinylpyrrolidone （PVP）, which was prepared using phase inversion method. The as-fabricated materials were further used as the active electrode materials for supercapacitors. The effects of PVP concentration in the casting solution on structure feature and electrochemical capacitive performance of the as-prepared carbon membranes were also studied in detail. As the electrode material for supercapacitor, a high specific capacitance of 278.0 F/g could be attained at a current of 5 mA/cm2 and about 92.90% capacity retention could be maintained after 2000 charge/discharge cycles in 2 mol/L KOH solution with a PVP concentration of 0.3 wt% in the casting solution. The facile hierarchical pore structure preparation method and the good electrochemical capacitive performance make the prepared carbon membrane particularly promising for use in supercapacitor.     

Syntheses and structural determination of mononuclear nine-coordinate (MnH)[GdIII(EDTA)(H2O)3] · 4H2O and 2D ladder-like binuclear nine-coordinate (MnH)2[Gd 2 III (H2TTHA)2] · 4H2O

Two title rare earth metal coordination compounds, (MnH)[Gd^III(Edta)(H₂O)₃] · 4H₂O (I) and (MnH)₂[Gd ₂ ^III (H₂Ttha)₂] · 4H₂O (II), where Mn = methylamine, H₄Edta = ethylenediamine-N,N,N′,N′-tetraacetic acid, H₆Ttha = triethylenetetramine-N,N,N′,N″,N′″,N′″-hexaacetic acid), have been successfully synthesized through direct heating reflux and characterized by FT-IR spectroscopy, thermal analysis and single-crystal X-ray diffraction techniques. In complex I, the Gd³⁺ ion is nine-coordinated by an Edta ligand and three water molecules, yielding a pseudo-monocapped square antiprismatic (MC-SAP) conformation. Complex I crystallizes in the orthorhombic crystal system with space group Fdd2. The cell dimensions are as follows: a = 19.5207(17), b = 35.387(3), c = 12.5118(11) Å, and V = 8642.8(13) ų. The central Gd³⁺ ion of II is also ninecoordinate, forming tricapped trigonal prismatic (TC-TP) conformation with three amine nitrogen atoms and six oxygen atoms. Complex II crystallizes in the monoclinic crystal system with P2/c space group. The crystal data are as follows: a = 14.4301(13), b = 11.2400(11), c = 17.7102(16) Å, β = 112.606(2)°, and V = 2651.8(4) ų. There retain outer-protonated and inner-protonated carboxyl oxygen atoms in the [Gd ₂ ^III (H₂Ttha)₂]^2? complex anion. In II, there are only one type of methylamine cation (MnH⁺) as the counter ion, which connects [Gd ₂ ^III (H₂Ttha)₂]^2? complex anions and lattice water molecules through hydrogen bonds, leading to the formation of 2D ladder-like layer structure.     

An Unconventional Polymerization Route to Hydrophilic Fluorescent Organic Nanoparticles for Multicolor Cellular Bioimaging

We demonstrated an unconventional polymerization route to synthesize hydrophilic fluorescent organic nanoparticles (FONs) for multicolor cellular bioimaging in this contribution. The route benefits from our unexpected discovery of a rapid polymerization reaction between 1,6‐hexanediol dipropiolate and 2,4,6‐triazide‐1,3,5‐triazine under the catalysis of N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (PMDETA). Interestingly, the 2,4,6‐triazide‐1,3,5‐triazine and PMDETA system can also induce rapid free radical polymerization at room temperature. The as‐prepared FONs exhibited promising water solubility and stability with an average diameter of 20 nm. The excitation wavelength‐dependent fluorescent properties endow the FONs with blue, yellow, and red fluorescent emission under UV, blue, and green excitation, respectively. The cytotoxicity of FONs was investigated by using a Cell Counting Kit (CCK‐8) assay, which indicated good biocompatiblity. More importantly, the cell uptake experiment verified the FONs were excellent fluorescent nanoprobes for multicolor cellular bioimaging. Therefore, this unconventional route provides a novel fabrication strategy of highly hydrophilic FONs for biomedical applications.