光纤传感颜色识别系统的设计与实现

利用光电传感技术进行颜色识别可以克服传统识别方法的许多不足,能辨别出微小的颜色变化并大幅度提高测试精确度。通过探测物体的后向反射光,一种采用反射式数字光纤传感器设计的颜色识别系统得以实现。由于不同颜色的被测物体对光信号吸收和反射能力不同,它可以根据反射光的强弱来识别颜色。实验证明采用光纤传感器可以实现近距离范围内对被测物体任意区域的非接触式测量,测量范围宽、测试精度高,在表面探测中具有很好的应用前景。     

灰建模在条件价值法数据处理中的应用

采用三江平原湿地调查问卷结果作为原始数据,探讨了灰建模方法在条件价值法数据处理中的应用.在对问卷数据进行聚类分析的基础上,采用传统的GM(1,1)模型,得到了合理有效的灰色模型,改进了条件价值法数据建模中仅将支付与抗议支付作为两个基本变量的模型,得出了多分类模型.     

基于可减的实半环与实素理想

半环R被称为实半环,若对于任意的n∈N,方程x1^2＋…＋xn^2=0在R中只有零解：x1=…=xn=0.为了刻画实半环,引入了实理想和极小素理想的概念,利用同余的方法,得到了可减半环类中实半环的结构定理.     

HL-1装置的微机数据获取及处理

本文描述HL-1装置物理调试实验中微机数据获取及处理工作。获得了环电流、环电压、软X射线、硬X射线、磁探针信号的数据。处理后得到了等离子体参数有等离子体电流、电子温度、能量约束时间、Z_(eff)和振荡模式等。     

A single-source route to CdS nanorods

We report the preparation of CdS nanorods using a thiosemicarbazide complex of cadmium [Cd(NH2CSNHNH2)2Cl2]. The precursor was decomposed in tri-n-octylphosphine oxide (TOPO) at 280 degrees C to give TOPO capped CdS nanoparticles; nano-dimensional rods of the material are clearly visible in transmission electron microscopy (TEM); the particles have been further characterised by X-ray diffraction (XRD) and selected area electron diffraction (SAED) and optical measurements.     

辐照气氛对异丙氧基杯[4]冠-6辐解的影响

异丙氧基杯[4]冠-6(1,3-交替-25,27-二(2-丙氧基)杯[4]芳烃-26,28-冠-6, 简称BPC6)对高放废液中的放射性Cs离子具有很好的选择萃取性能, 然而在萃取过程中BPC6 会受到强辐射场辐照, 所以有必要研究其辐射稳定性. 本文应用气相色谱(GC)、傅里叶变换显微红外(Micro-FTIR)和核磁共振(NMR)谱等手段分析了BPC6 固体分别在O₂和N₂气氛下的γ辐照效应. 结果表明, 当剂量为1 MGy时, O₂气氛下BPC6 的辐解率明显高于N₂(分别约为10.4%和2.5%), 而且气体辐解产物也有很大差异, 在O₂气氛下主要为H₂、CH₄、CO和CO₂,而在N₂辐照气氛下还有C₂H₄、C₂H₆、C₃H₆和C₃H₈等产物. 通过综合分析气体与固体辐解产物, 我们提出BPC6在不同气氛下具有不同的辐解途径, 这将为BPC6 萃取体系的辐射效应研究提供新的方法与思路, 加深对其辐解机理的认识.     

Interaction of divalent ions of copper,magnesium and zinc with isotactic polymethacrylic acid

The interaction of divalent metal ions (Cu²⁺, Mg²⁺ and Zn²⁺) with isotactic poly(methacrylic acid) (PMAA) has been studied using potentiometric, equilibrium dialysis and viscometric techniques. Partially neutralized isotactic PMAA was titrated with solutions of metal ion so as to enable the polymer/metal ion ratio to be varied over a wide range. The results show the existence of two types of complexes, one at low and the other at high metal ion concentrations. Results from dialysis studies confirm the observations from potentiometric results, indicating the existence of two types of complexes in the solution. Viscometric titrations reveal that the presence of the bound metal ions on the polyelectrolyte imposes structural restrictions on the chain.     

钇-铕-美他环素-CTMAB稀土共发光体系的研究及分析应用

利用荧光光谱法研究了钇-铕-美他环素(MTC)-CTMAB体系的稀土共发光效应,最佳形成条件,并对其作用机理进行了探讨,提出了测定MTC的荧光分光光度法。结果表明,共发光体系的荧光强度与MTC的浓度在1.0×10-7mol/L~1.5×10-5mol/L范围内呈良好的线性关系,其检出限为3.6×10-8mol/L。采用标准加入法测定了药物制剂中的MTC。     

Specific Proteins in the Indirect Somatic Embryogenesis of Freesia

Using the young inflorescence segments of Freesia refracta as explants, indirect somatic embryogenesis of somatic cells was induced in a N6 medium supplemented with some exogenous hormones. SDS-polyacrylamide gel electrophoresis（SDS-PAGE） was used for the analysis of soluble proteins produced during the somatic embryogenesis of this plant. There are six polypeptides, which might play some roles in the process of somatic embryo development. Tltree polypeptides（45, 53 and 55 kD） were detected in the stages of embryogenic callus, globular embryoid, and embryoid with coleoptiles, except the embryoid with leaf. One polypeptide（ 83 kD） was specific for the stages of embryoid with eoleoptiles and embryoid with leaf. One polypeptide（37 kD） was detected in the first two stages, namely, embryogenic callus and globular embryoid. One polypeptide（35 kD） was regularly synthesized in each stage, from embryogenic callus to embryoid with leaf.     

Study on Electrochemical Copolymerization of Aniline and 3-Methylthiophene in HMIMBF4 Ionic Liquid and Its Properties

Electrochemical polymerization of aniline and 3-methylthiophene has been accomplished in 1-methylimidazium tetrafluoroborate （HMIMBF4） ionic liquid. Homopolymer and copolymers of aniline and 3-methylthiophene were obtained successfully. The copolymer was studied by cyclic voltammetry and electrochemical impedance spectroscopy. The formation of copolymer has been confirmed by FT-IR and UV spectra. The atomic force microscope （AFM） was used for microstructural analysis. Both the homopolymer and the copolymer had the catalytic activity for the hydroquinone.