Extrinsic spin Hall effect induced by iridium impurities in copper

We study the extrinsic spin Hall effect induced by Ir impurities in Cu by injecting a pure spin current into a CuIr wire from a lateral spin valve structure. While no spin Hall effect is observed without Ir impurity, the spin Hall resistivity of CuIr increases linearly with the impurity concentration. The spin Hall angle of CuIr, (2.1±0.6)% throughout the concentration range between 1% and 12%, is practically independent of temperature. These results represent a clear example of predominant skew scattering extrinsic contribution to the spin Hall effect in a nonmagnetic alloy.     

Near‐Infrared‐III‐Absorbing and ‐Emitting Dyes: Energy‐Gap Engineering of Expanded Porphyrinoids via Metallation

The synthesis of organometallic complexes of modified 26π‐conjugated hexaphyrins with absorption and emission capabilities in the third near‐infrared region (NIR‐III) is described. Symmetry alteration of the frontier molecular orbitals (MOs) of bis‐Pd^II and bis‐Pt^II complexes of hexaphyrin via N‐confusion modification led to substantial metal d_π–p_π interactions. This MO mixing, in turn, resulted in a significantly narrower HOMO–LUMO energy gap. A remarkable long‐wavelength shift of the lowest S₀→S₁ absorption beyond 1700 nm was achieved with the bis‐Pt^II complex, t ‐Pt₂‐3 . The emergence of photoacoustic (PA) signals maximized at 1700 nm makes t ‐Pt₂‐3 potentially useful as a NIR‐III PA contrast agent. The rigid bis‐Pd^II complexes, t ‐Pd₂‐3 and c ‐Pd₂‐3 , are rare examples of NIR emitters beyond 1500 nm. The current study provides new insight into the design of stable, expanded porphyrinic dyes possessing NIR‐III‐emissive and photoacoustic‐response capabilities.     

Scanning tunneling microscopy study on a BC3 covered NbB2(0 0 0 1) surface

We have investigated a BC₃ covered NbB₂(0 0 0 1) surface using scanning tunneling microscopy (STM), scanning tunneling spectroscopy (STS), and low energy electron diffraction (LEED). The STM images reveal characteristic features of a Moiré pattern reflecting an incommensurate relation of the BC₃ sheet with the substrate: bright protrusions with the periodicity of the substrate lattice are modulated in intensity with the periodicity of the BC₃ lattice. As a result, the surface exhibits nm-scale patchy regions with either the √3 × √3 or the 1 × 1 structure of the substrate. The two-dimensional Fourier transformation pattern of the STM image is consistent with the LEED pattern proving the epitaxial and incommensurate relationship between BC₃ surface sheet and substrate. No feature of a predicted superconducting gap was found in STS spectra measured at 5 K.     

Shear-Force Detection by Reusable Quartz Tuning Fork without External Vibration

Many studies have reported on the use of quartz tuning forks (a type of crystal oscillator used in wristwatches) in the detection of shear force, employed to control the distance between the probe and the sample in a scanning near-field optical microscope. This study focuses on a newly-devised shear force detection method capable of simultaneous non-external oscillation and detection, which also allows for subsequent reuse of a tuning fork. The optimum configuration and tip length for inserting a probe into the slit of a tuning fork have been elucidated. The shear force was detectable in about 5 nm decay length using such conditions.     

High-performance liquid chromatographic determination of fluvoxamine and fluvoxamino acid in human plasma.

A high-performance liquid chromatographic (HPLC) method has been developed for the simultaneous determination of fluvoxamine and its major metabolite fluvoxamino acid in plasma. Fluvoxamine and fluvoxamino acid in plasma were extracted using a C18 bonded-solid phase cartridge, followed by C4 reversed-phase HPLC separation.Fluvoxamine, fluvoxamino acid and moperone as an internal standard were detected by ultraviolet absorbance at 254 nm. It was possible to determine both fluvoxamine and fluvoxamino acid in the concentration range of 25.0-200.0 ng/mL, respectively. The detection limits of both fluvoxamine and fluvoxamino acid were 10.0 ng/mL, respectively. The mean recoveries of fluvoxamine and fluvoxamino acid added to plasma were more than 94.0% and 96.5%, with a coefficient of variation of less than 7.6% and 8.2%, respectively. This method has been used for the simultaneous determination of steady-state plasma concentration (Css) of fluvoxamine and fluvoxamino acid in depressive patients treated with 200 mg of oral fluvoxamine dosed as 100 mg twice-daily. The Css values of fluvoxamine and fluvoxamino acid in twelve Japanese patients were showed individual variations, which were in the range of 48.3-532.9 ng/ml and 35.6-307.1 ng/ml, respectively.     

Properties of TiO2-polyacrylic acid dispersions with potential for molecular recognition

Titanium dioxide (TiO₂)/polyacrylic acid (PAA) (TiO₂/PAA) particles were formed by mixing PAA and an acidic solution of TiO₂ nanoparticles in dimethylformamide (DMF) followed by heat treatment. TEM and particle analysis showed that the resulting particles had a narrow size distribution. The colloid was very stable and aggregation was not observed over a wide pH range (3–9) or at high salt concentration. The residual carboxylic acid of PAA could be modified via EDC/NHS activation to form an amide bond with a protein. An antibody was attached to the hybrid nanoparticle and specific binding to antigen was monitored by surface plasmon resonance. The results suggest that TiO₂/PAA nanoparticles are candidates as the base component of a photocatalytic system with potential for substrate selectivity.     

Reconfigurable Photonic Crystal Reversibly Exhibiting Single and Double Structural Colors

Unlike absorption-based colors of dyes and pigments, reflection-based colors of photonic crystals, so called “structural colors”, are responsive to external stimuli, but can remain unfaded for over ten million years, and therefore regarded as a next-generation coloring mechanism. However, it is a challenge to rationally design the spectra of structural colors, where one structure gives only one reflection peak defined by Bragg's law, unlike those of absorption-based colors. Here, we report a reconfigurable photonic crystal that exhibits single-peak and double-peak structural colors. This photonic crystal is composed of a colloidal nanosheet in water, which spontaneously adopts a layered structure with single periodicity (407 nm). After a temperature-gradient treatment, the photonic crystal segregates into two regions with shrunken (385 nm) and expanded (448 nm) periodicities, and thus exhibits double reflection peaks that are blue- and red-shifted from the original one, respectively. Notably, the transition between the single-peak and double-peak states is reversible.     

Preparation of composite monoliths of quaternized chitosan and diatom earth for protein separation

In this study, composite monoliths with porous structures were prepared using quaternized chitosan and diatom earth for protein separation. Quaternized chitosan (N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride) dissolved in water was mixed with diatom earth and crosslinked with glutaraldehyde under low-temperature conditions to form a cryogel. Interconnected porous monoliths were obtained after removing ice crystals from the cryogel. The monoliths adsorbed bovine serum albumin selectively from the solution mixture of bovine serum albumin and bovine ɤ-globulin, and bovine ɤ-globulin was recovered in the flow-through fraction. The adsorption selectivity was enhanced by changing the solution pH from 6.8 to 5.5. The adsorption of bovine serum albumin by the monolith was replicated at least five times following its washing with a buffer containing 400 mM NaCl and subsequent regeneration with a 10 mM acetate buffer. The composited monolith is a promising adsorbent for the removal of acidic proteins, such as serum albumin contamination in neutral proteins, for example, ɤ-globulins, in bioproduction processes.     

Catalysis of a peptidic micellar assembly covalently immobilized within mesoporous silica channels: importance of amphiphilic spatial design

A mesostructured silica/organic composite 1-MS, constructed from a rodlike micelle of amino acid amphiphile 1 that has a condensable head group and that can be used as a template, was found to be able to catalyze the acetalization of cyclohexanone, in ethanol at 25 degrees C (50% in 12 h), whereas no reaction took place with unfunctionalized mesoporous silica. In sharp contrast, hydrolytic removal of the C16 alkyl tail of immobilized 1 resulted in the complete disappearance of the catalytic activity, which suggests the importance of a hydrophobic inner domain for the admission of cyclohexanone. Unsupported peptide amphiphile 2, under identical conditions to those above, was inefficient for acetalization regardless of the absence (2% in 24 h) or presence of mesoporous silica (7% in 24 h). Reference composite 2-MS, which is a noncovalently immobilized peptidic micelle, was virtually inactive (1% in 24 h). These observations indicate the importance of covalent immobilization of the peptidic rod micelle for catalysis. Mesostructured silicate 3-MS hybridized with a nonpeptidic, ammonium ion amphiphile (3) showed a certain catalytic activity, but the yield (12% in 24 h) of the acetal was much lower than that achieved by using 1-MS as the catalyst. Amorphous silica with immobilized 1 on its surface was much less active than 1-MS for acetalization (5% in 24 h).