Improved synthesis of functionalized 5,6-dihydro-pyrimido[4,5-b][1,4]oxazepines

Novel synthetic approaches toward 5,6-dihydro-pyrimido[4,5-b][1,4]oxazepines were reported that led to successful introduction of poorly reactive anilines and various 2-hydroxybenzaldehydes to this therapeutically relevant scaffold. More extensive SAR studies on this scaffold hence became possible.     

Amperometric detection of amino acids with a passivated copper electrode

The amperometric behaviour of a copper electrode towards amino acids is studied by means of a rotating disc electrode. A theoretical model describing the anodic background current in a buffer solution and the increase of the current caused by amino acids is checked experimentally. The influences of the amino acid concentration, the rotation speed of the electrode and the composition of the buffer solution are studied. It is proved that chemical dissolution of a passivating film on the electrode surface, which is enhanced by the complexation reaction between the amino acid and copper(II) ions, is the principle of the phenomena observed. The applicability to flow systems is demonstrated.     

Contactless conductivity detection of synthetic polymers in non-aqueous size-exclusion electrokinetic chromatography

A capacitively coupled contactless conductivity detection (CCD) system has been applied for the detection of neutral synthetic polymers in capillary size-exclusion electrokinetic chromatography (SEEC). Polystyrene standards, that were used as a model compounds, were separated on a capillary column packed with porous 10 microm silica particles with an electrokinetically driven mobile phase, and detected by CCD and UV detection simultaneously. Mass-calibration curves for polystyrene were constructed. Satisfactory results were obtained for the linearity, the run-to-run repeatability (<0.2% for the relative retention and <4% for the peak area) and the robustness of the detector. One of the major issues in this preliminary study was to investigate the origin of the peaks observed for the polystyrene standards. The effect of the molar mass of the polystyrenes on the sensitivity was small. Therefore, the signals obtained could not be explained as the result of an increased viscosity and a decreased solution conductivity of the solute zone. An alternative hypothesis is suggested, and recommendations for further research are given.     

Ligand-assisted reduction of osmium tetroxide with molecular hydrogen via a [3+2] mechanism

Osmium tetroxide is reduced by molecular hydrogen in the presence of ligands in both polar and nonpolar solvents. In CHCl3 containing pyridine (py) or 1,10-phenanthroline (phen), OsO4 is reduced by H2 to the known Os(VI) dimers L2Os(O)2(mu-O)2Os(O)2L2 (L2 = py2, phen). However, in the absence of ligands in CHCl3 and other nonpolar solvents, OsO4 is unreactive toward H2 over a week at ambient temperatures. In basic aqueous media, H2 reduces OsO4(OH)n(n-) (n = 0, 1, 2) to the isolable Os(VI) complex, OsO2(OH)4(2-), at rates close to that found in py/CHCl3. Depending on the pH, the aqueous reactions are exergonic by deltaG = -20 to -27 kcal mol(-1), based on electrochemical data. The second-order rate constants for the aqueous reactions are larger as the number of coordinated hydroxide ligands increases, k(OsO4) = 1.6(2) x 10(-2) M(-1) s(-1) < k(OsO4(OH)-) = 3.8(4) x 10(-2) M(-1) s(-1) < k(OsO4(OH)2(2-)) = 3.8(4) x 10(-1) M(-1) s(-1). The observation of primary deuterium kinetic isotope effects, k(H2)/k(D2) = 3.1(3) for OsO4 and 3.6(4) for OsO4(OH)-, indicates that the rate-determining step in each case involves H-H bond cleavage. Density functional calculations and thermochemical arguments favor a concerted [3+2] addition of H2 across two oxo groups of OsO4(L)n and argue against H* or H- abstraction from H2 or [2+2] addition of H2 across one Os=O bond. The [3+2] mechanism is analogous to that of alkene addition to OsO4(L)n to form diolates, for which acceleration by added ligands has been extensively documented. The observation that ligands also accelerate H2 addition to OsO4(L)n highlights the analogy between these two reactions.     

Retroaldol-aldol isomerization of perhydroazulenic hydroxyketones

The retroaldol-aldol isomerization of the epimeric hydroxyketones $\text{3}$ and $\text{5}$ was found to yield predominantly $\text{4}$ and $\text{6}$, respectively, under kinetic conditions in the presence of chelating lithium cations. In hydroxylic medium $\text{4}$ is the preferred kinetic product. Under equilibration conditions $\text{4}$ and $\text{5}$ predominate.     

Adsorptive stripping voltammetric determination of traces of molybdenum in natural water in the presence ofα-benzoinoxime

The electrochemical behavior of the molybdenum complex of -benzoinoxime was investigated using cyclic voltammetry and linear scan voltammetry, after adsorptive accumulation of the complex onto a hanging mercury drop electrode (HMDE). The signal corresponds to the reduction of molybdenum in the complex adsorbed at the HMDE surface. Under optimal conditions, the adsorptive stripping voltammetric procedure gave an extremely low detection limit of 0.1 nM (9.6ng/l) Mo(VI) following stirred accumulation for 5 min at 0.0 V (vs. Ag/AgCl). The reduction cur rent-[Mo(VI)] relationships were linear up to 25 and 100 nM. Repetitive determinations of 10 nM solutions gave relative standard deviations of 2.2 and 3.5%, for 1 and 5-min accumulation periods, respectively. Most of the ions investigated did not interfere with the determination of molybdenum, except for tungsten. Excellent selectivity against copper was observed. The proposed procedure was applied to the direct determination of molybdenum in natural water.     

Ultrathin polymer film formation by collision-induced cross-linking of adsorbed organic molecules with hyperthermal protons

A new synthetic approach for the formation of ultrathin polymer films with customizable properties was developed. In this approach, the kinematic nature of proton collisions with simple organic molecules condensed on a substrate is exploited to break C-H bonds preferentially. The subsequent recombination of carbon radicals gives a cross-linked polymer thin film, and the selectivity of C-H cleavage preserves the chemical functionalities of the precursor molecules. The nature and validity of the method are exemplified with theoretical results from ab initio molecular dynamics calculations and experimental evidence from a variety of characterization techniques. Its applicability is demonstrated by the synthesis of ultrathin polymer films with precursor molecules such as dotriacontane, docosanoic acid, poly(acrylic acid) oligomer, and polyisoprene. The approach is fundamentally different from conventional chemical synthesis as it involves an unusual mix of physical and chemical processes including charge exchange, projectile penetration, kinematics, collision-induced dissociation, inelastic energy transfer, chain transfer, and chain cross-linking.     

Palladium(II) and platinum(II) complexes of Schiff bases derived from 2,6-diacetylpyridine and S-methyldithiocarbazate and the X-ray crystal structure of the [Pd(mdapsme)Cl] complex

Condensation of 2,6-diacetylpyridine (dap) with S-methyldithiocarbazate (smdtc) in a 1:2 molar ratio yields a bicondensed pentadentate Schiff base (H₂dapsme) which reacts with K₂MCl₄ (M = Pd^II, Pt^II) giving stable complexes of empirical formula, [M(dapsme)] · 0.5Me₂CO. These complexes have been characterized by a variety of physico-chemical techniques. Condensation of dap with smdtc in a 1:1 molar ratio also yields the bicondensed Schiff base (H₂dapsme) as the major product, but a mono-condensed one-armed Schiff base (Hmdapsme) is also obtained as a minor product. The latter reacts with K₂PdCl₄ in an EtOH–H₂O mixture yielding a crystalline complex of empirical formula, [Pd(mdapsme)Cl], the crystal structure of which has been determined by X-ray diffraction. The complex has a distorted square-planar structure in which the ligand is coordinated to the palladium(II) ion as a uninegatively charged tridentate chelating agent via the pyridine nitrogen atom, the azomethine nitrogen atom and the thiolate sulfur atom; the oxygen atom of the acetyl group does not participate in coordination.     

Determination of oxygen in alkali halide salts by proton activation and radiochemical separation

A lanthanum fluoride precipitation method for the separation of¹⁸F produced from the¹⁸O(p,n)¹⁸F reaction in alkali halide salts is described. This radiochemical separation method minimizes interferences from other positron emitters produced by proton bombardment and makes the accurate determination of ppm-level¹⁸O in complex alkali halide systems feasible. The interference from the¹⁹F(p,d)¹⁸F reaction is eliminated by keeping the proton energy less than 8.2 MeV. Applications of this technique to studies of dissolved oxide species in molten alkali halide salts are discussed.     

Electron impact mass spectral fragmentation of chiral bisbenzoxazole,bisbenzothiazole and biscarbamide derivatives of 2,2-dimethyl-1,3-dioxolane

The mass spectrometric fragmentation behaviour of five pairs of (R,R)- and (S,S)-4,5-bis(benzoxazol-2-yl)-2,2-dimethyl-1,3-dioxolane derivatives, one pair of (R,R)- and (S,S)-4,5-bis(benzothiazol-2-yl)-2,2-dimethyl-1,3-dioxolanes, and three pairs of (R,R)- and (S,S)-N,N'-bis(2-hydroxyaryl)-2,2-dimethyl-1,3-dioxolane-4,5-dicarbamides, all important compounds for asymmetric catalysis (P. Jiao et al., Tetrahedron Asymmetry 2001; 12: 3081), has been studied with the aid of mass-analyzed ion kinetic energy spectrometry and accurate mass measurements under electron impact ionization conditions. The spectral observations have been rationalized in terms of fragment ion structures and fragmentation mechanisms that will provide an aid to spectral interpretation for new compounds of this type.