Pressure-Sensitive Paint measurement of the flow around a simplified car model

In applying Pressure-Sensitive Paint (PSP) to low-speed flow wind tunnel testing, it is important to minimize any measurement uncertainties. There are various error sources such as camera noise, misalignment of images due to model displacement and temperature distribution over the model. Among these factors, the effects of temperature distribution change during tests on pressure measurement accuracies were studied in the present paper. Pressure and temperature distributions over a simplified car model (1/10 scale Ahmed model) were measured using PSP and Temperature-Sensitive Paint (TSP). Sequential images were acquired at the same intervals over the entire test period, including for the conditions before and after the tunnel run. As a result, it was found that the measurement error caused by temperature distribution over the model could be reduced using a single-point temperature measurement. In addition, by measuring surface temperature distributions on the model using TSP, it was proved that the most accurate pressure measurement could be made by rationing the wind-off image acquired immediately after shutting down the tunnel to the wind-on image acquired immediately before shutting down the tunnel. Using the present measurement technique, complicated pressure fields over the Ahmed model were successfully visualized.     

Fabrication of microfluidic optical waveguides on glass chips with femtosecond laser pulses

We describe the fabrication of microfluidic channel structures on the surface of a borosilicate glass slide by femtosecond laser direct writing for optical waveguide application. Liquid with a variable refractive index is fed into the microchannel, serving as the core of the waveguide. We demonstrate that either a multimode or a single-mode waveguide can be achieved by controlling the refractive index of the liquid.     

Family of symplectic implicit Runge-Kutta formulae

A family of formulae for the sympletic IRK method is investigated. Specifically, focus is given to general solutions for formula parameters of IRK under the symplectic and the order conditions. Examples of such formulae are constructed for up to three stages.     

The Supposition for the Kochen and Specker Theorem Using Sum rule and Product rule

We investigate a hidden-variable theory introduced by Kochen and Specker. The “hidden” results of measurements are either 1 or − 1. We suppose the validity of Sum rule and Product rule. Kochen and Specker suppose the two operations Sum rule and Product rule commute with each other. It is shown that the two operations Sum rule and Product rule do not commute with each other when we want to avoid the Kochen and Specker paradox. Otherwise we encounter the Kochen and Specker paradox. We mention the supposition for Greenberger, Horne, and Zeilinger paradox. It is discussed that only Product rule is necessary for the paradox. We give up the two paradoxes if (1) Sum rule and Product rule do not commute with each other and (2) Product rule is not valid.

     

Interaction of highly charged ions with carbon-based materials using Kobe EBIS

Interaction of highly charged ions (HCIs) with surfaces produce various specific phenomena as a consequence of the potential energy that HCI possesses. In the present study, we have observed photon emission, structural, magnetic, and electronic modification on various carbon-based materials such as carbon nanotube by the impact of HCIs using an electron beam ion source named Kobe EBIS installed at the Kobe University. In order to study the potential effect, HCIs of Ar^q+ (q = 6–16) with the intensity of 0.1–1 nA are projected on the surface with a constant kinetic energy (16 keV). For photon emission measurements, we observed spatial and spectral distribution of visible light emission from the surface during irradiation with HCIs. On the other hand, the structural modification of multi-walled carbon nanotubes (MWCNTs) irradiated with HCIs has been analyzed using a transmission electron microscopy and Raman spectroscopy. Irradiation effects on the resistivity of single MWCNT supported on micrometer scale bridge pattern were also measured. We have also measured magnetic structure of highly oriented pyrolytic graphite irradiated with HCIs using electron spin resonance at low temperature. At the present paper, we will review our recent experimental results on the interaction of HCI with various carbon-based materials.     

Time Invariance as an Additional Constraint on Nonlocal Realism

We assume that time invariance of physical laws is true. We assume that one source of 2N uncorrelated spin-carrying particles emits them in a state, which can be described as a multipartite pure uncorrelated state (+∞>N≥1). We assume that each of them is a spin-1/2 pure state lying in the \(\frac{z+x}{\sqrt{2}}\) direction. We assume that the measurement setup is two-orthogonal-settings for each of the observers. We show that 2N-particle pure uncorrelated quantum state violates a time invariant nonlocal realistic theory. 2N implies that we consider Bose-Einstein statistics.     

Synchrotron radiation photoelectron spectroscopy and near-edge X-ray absorption fine structure study on oxidative etching of diamond-like carbon films by hyperthermal atomic oxygen

Surface structural changes of a hydrogenated diamond-like carbon (DLC) film exposed to a hyperthermal atomic oxygen beam were investigated by Rutherford backscattering spectroscopy (RBS), synchrotron radiation photoelectron spectroscopy (SR-PES), and near-edge X-ray absorption fine structure (NEXAFS). It was confirmed that the DLC surface was oxidized and etched by high-energy collisions of atomic oxygen. RBS and real-time mass-loss data showed a linear relationship between etching and atomic oxygen fluence. SR-PES data suggested that the oxide layer was restricted to the topmost surface of the DLC film. NEXAFS data were interpreted to mean that the sp² structure at the DLC surface was selectively etched by collisions with hyperthermal atomic oxygen, and an sp³-rich region remained at the topmost DLC surface. The formation of an sp³-rich layer at the DLC surface led to surface roughening and a reduced erosion yield relative to the pristine DLC surface.     

Wilsonian RG Analysis of the P-wave Nucleon–Nucleon Scattering Including Pions

We perform a Wilsonian renormalization group analysis for the nucleon–nucleon scattering in the P waves in the nuclear effective field theory including pions, in a similar way to the one done for the S-waves in our previous paper. We emphasize that the one-pion exchange interaction with large momentum transfer is of the same order as the leading contact interaction, so that there is no mismatch of the power counting. It is explicitly shown by obtaining consistent sets of renormalization group equations, that the cutoff dependence generated by the loop diagrams containing pion exchanges can be compensated by the cutoff dependence of the coupling constants of the contact interactions.