What we have learned from studies on chemical properties of amorphous alloys?

Amorphous alloys have many attractive characteristics including extremely high corrosion resistance if the sufficient amounts of corrosion-resistant elements are added. The superiority of amorphous alloys is based on the homogeneous single phase nature without any chemical and physical heterogeneities. Although there are processing limitations to avoid the formation of heterogeneous crystalline structure in addition to no welding technology without crystallization, the application of corrosion-resistant amorphous alloys is expected particularly to the very aggressive environments, where any conventional crystalline metallic materials cannot be used. Some amorphous bulk alloys showed zero corrosion mass loss due to spontaneous passivation even in 12 M HCl. Production of amorphous bulk alloys became possible for selected compositions. The homogeneous single phase nature is also effective to form useful catalysts with unique composition and structure. An example of catalysts is for carbon dioxide methanation useful for supply of renewable energy in the form of methane.     

Voice Analysis of Postlingually Deaf Adults Pre- and Postcochlear Implantation

Objectives

To ascertain whether cochlear implantation (CI), without specific vocal rehabilitation, is associated with changes in perceptual and acoustic vocal parameters in adults with severe to profound postlingual deafness.

Hypothesis

Merely restoring auditory feedback could allow the individual to make necessary adjustments in vocal pattern.

Study Design

Prospective and longitudinal.

Methods

The experimental group composed of 40 postlingually deaf adults (20 males and 20 females) with no previous laryngeal or voice disorders. Participants’ voices were recorded before CI and 6–9 months after CI. To check for chance modifications between two evaluations, a control group of 12 postlingually deaf adults, six male and six female, without CI was also evaluated. All sessions composed of the recording of read sentences from Consensus Auditory-Perceptual Evaluation of Voice and sustained vowel /a/. Auditory and acoustic analyses were then conducted.

Results

We found a statistically significant reduction in overall severity, strain, loudness, and instability in auditory analysis. In vocal acoustic analysis, we found statistically significant reduction fundamental frequency (F0) values (in male participants) and F0 variability (in both genders). The control group showed no statistically significant changes in most vocal parameters assessed, apart from pitch and F0 (in female participants only). On comparing the interval of variation of results between the experimental and control groups, we found no statistically significant difference in vocal parameters between CI recipients and nonrecipients, with the exception of F0 variability in male participants.

Conclusions

The patients in our sample showed changes in overall severity, strain, loudness, and instability values, and reductions in F0 and its variability. On comparing the variation of results between the groups, we were able to prove in our study that implant recipients postlingually deaf adults (experimental group), without specific vocal rehabilitation, differed from nonrecipients (control group) in loudness and F0 variability sustained vowel /a/ in male participants.     

Effect of suspended particles on spreading of volatile droplet on solid substrate

Abstract  

We have been interested in behaviors of suspended particles in a volatile droplet placed on a smooth substrate. It is known that the particles gather and deposit in the vicinity of the macroscopic contact line of the droplet, which is generally called ‘coffee stain problem’. A convective flow induced by non-uniform evaporation through the interface brings suspended particles toward the pinned contact line in the drying droplet, which forms a ring stain. We have focused on the dynamics of the droplet with/without suspended particles spreading on the solid substrate and on the behaviors of particles in the evaporating droplet. Spreading process of the droplet is significantly affected by the suspended particles. We indicate flow patterns in the droplet, in which the flow exhibits a modal structure with a mode number in the azimuthal direction, and indicate particles depositions after the dryout of the droplet. Three-dimensional particle tracking velocimetry is applied to reconstruct such unique flow patterns in the spreading process of the droplet. Resultant patterns of the particles depositing on the substrate are introduced.     

Ruijsenaars' Commuting Difference Operators as Commuting Transfer Matrices

For Belavin's elliptic quantum R-matrix, we construct an L-operator as a set of difference operators acting on functions on the type A weight space. According to the fundamental relation RLL=LLR, taking the trace of the L-operator gives a set of commuting difference operators. We show that for the above mentioned L-operator this approach gives Macdonald type operators with elliptic theta function coefficient, actually equivalent to Ruijsenaars' operators. The relationship between the difference L-operator and Krichever's Lax matrix is given, and an explicit formula for elliptic commuting differential operators is derived. We also study the invariant subspace for the system which is spanned by symmetric theta functions on the weight space. Received: 27 December 1995 / Accepted: 11 November 1996     

Surface modification without desorption: recycling of Cl on Si(100)-(2 x 1)

We demonstrate chlorine-induced modification of Si(100)-(2 x 1) under conditions where Cl is recycled rather than desorbed as SiCl2. A dimer with 2 Cl atoms, 2SiCl, converts to SiCl2+Si, allowing the bare Si atom to escape onto the terrace. At temperatures below the desorption threshold, the SiCl2 unit decays through Cl diffusion, allowing the second Si atom to escape. The result is a dimer vacancy, terrace regrowth structures, and Cl that is able to participate in another pitting event. Access to this unexpected roughening pathway is controlled by the Cl concentration and temperature. This previously overlooked process represents an important component of Si(100) surface processing.     

Crystal Phases of TiO2 Ultrafine Particles Prepared by Laser Ablation of Solid Rods

Titanium dioxide ultrafine particles (UFPs) are produced by pulsed laser ablation of titanium or titanium dioxide (anatase and rutile) rods in an atmosphere of He or O₂/He mixture. The collected UFPs on cellulose membrane filters at the exit of the ablation chamber are analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The TiO₂ particles produced are composed of very small particles (diameter: 10–50nm) that are completely anatase, irrespective of the rod material, and relatively large particles (diameter: 100nm–1m) that are a mixture of anatase and rutile. The large particles consist of the direct strip-off fragments coming from the rod surface. The particles obtained from the laser ablation on TiO₂ rods in an atmosphere of He contains gray particles that are supposed to be amorphous TiO₂ (x < 2). In the presence of O₂ in the ablation chamber, these oxygen defects in amorphous TiO₂ are stabilized and anatase UFPs are formed. These results suggest that the crystal phase of the products can be controlled by adjusting the rod material and the gases used in the ablation process.     

Jet ejection from droplets near the Leidenfrost temperature

Abstract  

Droplets impinging on a hot surface that is near the Leidenfrost temperature were experimentally investigated. Ejection of jets from the top of the droplet was observed during the transient interaction between the droplet and a hot wall. We term this phenomenon jet ejection from droplets. When the bottom of the droplet initially impacts the hot surface, a jet is to be ejected from the top of the droplet. The jet ejection occurred only at low impact velocities and around the wetting limit temperature. It was not observed when droplets were dropped from large heights or when the surface was at a high temperature.     

High-performance optical code generation and recognition by use of a 511-chip, 640-Gchip/s phase-shifted superstructured fiber Bragg grating

The generation and recognition of a record-length 511-chip optical code is experimentally demonstrated by use of a superstructured fiber Bragg grating (SSFBG) with a chip rate of 640 Gchips/s. Very high reflectivity (92%) is achieved with high-quality correlation properties. The temperature deviation tolerance is approximately +/- 0.3 degrees C, which is within the package's temperature stability range (+/- 0.1 degrees C). Experimental results show good agreement with the theory. They indicate the SSFBG's potential for processing a long optical code with an ultrahigh chip rate, which could significantly improve the system's performance.     

Limit theorems in financial market models

Invariance principle states that a scaled simple random walk converges to the standard Brownian motion.In this article, we present a discrete time stochastic process, which reflects a microstructure of market dynamics, and prove a convergence to a scaling limit process with a drift term and a jump term. These terms are derived from a macroscopic condition on volumes traded in some time intervals. The mathematical tools for obtaining our results are Dobrushin-Hryniv theory and the method of cluster expansion developed in mathematical studies of statistical mechanics.     

Mid-infrared supercontinuum generation in a four-hole As2S5 chalcogenide microstructured optical fiber

We demonstrate the supercontinuum (SC) generation in a four-hole As₂S₅ chalcogenide microstructured optical fiber (MOF) experimentally. The As₂S₅ glass has better property of transmission than As₂S₃ glass in the visible range. The four-hole As₂S₅ MOF is fabricated by a rod-in-tube method. The SCs generated by different pump wavelengths at 2,000, 2,300 and 2,500 nm in the MOF whose length is from 2.3 to 20 cm are demonstrated. Those pump wavelengths correspond to the chromatic dispersion wavelength in the normal chromatic dispersion region, the anomalous chromatic dispersion region close to zero-dispersion wavelength (ZDW) and the anomalous chromatic dispersion region far from ZDW, respectively. Wider SCs can be obtained when pumped at a wavelength in the anomalous dispersion region close to ZDW. The widest SC range of 4,280 nm (from 1,370 to 5,650 nm) covering two octaves was obtained in a 4.8-cm-long fiber pumped at 2,300 nm.