Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

Design and synthesis of labeling reagents (MS probes) for highly sensitive electrospray ionization mass spectrometry and their application to the detection of carbonyl, alcohol, carboxylic acid and primary amine samples.

Novel labeling reagents, called MS probes, which possess a positively charged quaternary amine moiety and can transform a neutral analyte into a charged compound by simply mixing with the analyte and allowing the mixture to stand from several minutes to 30 min at room temperature or while heating to 50 degrees C, were designed and synthesized for the highly sensitive detection of carbonyl, alcohol, carboxylic acid and primary amine samples by electrospray ionization mass spectrometry (ESI-MS). The positively charged products can be detected with high sensitivity in an ESI-MS system, which is the most popular liquid MS instrument. All of the labeled products showed a remarkably large increase in the molecular-ion peak abundance detection sensitivity of over 500-fold at picomolar concentration levels compared to that of unlabeled analytes in an ESI-MS system. These MS probes, used together with liquid MS detection, are widely applicable as a convenient method for the highly sensitive detection of less than picomolar levels of analytes, and therefore greatly enhance the power of ESI-MS analysis.     

Ion-exchange selectivity of anion exchange resin modified with polystyrenesulfonic acid.

In order to change the ion-exchange selectivity of anion-exchange resin, the surface of a gel-type anion exchange resin was modified with anionic polyelectrolyte, polystyrenesulfonic acid. Using this modified resin, the ion-exchange rate of nitrate was little decreased, but that of sulfate was evidently decreased. It is considered that the ion-exchange reaction of the multivalent anion is suppressed by the greater electrostatic repulsive force against the modification layer than that against the monovalent anion. Thus, this modified resin may be suitable for the selective separation of monovalent anions. The influence of the modified condition on the ion-exchange rate was examined. Furthermore, this modified resin was used to separate nitrate ions from sulfate ions in the aqueous solution.     

Simple and rapid determination of trace amounts of gold(III), palladium(II), and platinum(IV) in industrial waste solutions after recovery of noble metals by combined use of GFAAS and anion-exchange separation.

A simple and rapid method for the analysis of trace amounts of gold(III), palladium(II), and platinum(IV) by the combined use of graphite furnace atomic absorption spectrometry and anion-exchange separation was proposed, and successfully applied to the rapid determination of metals in industrial waste solutions obtained from the final process of noble-metal recovery factories, because noble metals can be selectively and quantitatively separated to a high degree by using a small column containing only a 0.7 g-portion of a common anion-exchange resin and a dilute thiourea solution.     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Core-shell type polymer microspheres prepared by domain fixing of block copolymer films

Well-defined poly[styrene(S)-b-isoprene(I)] diblock copolymers were prepared by sequential anionic addition. The crosslinking reactions of polyisoprene (PI) spherical domains of these block copolymers were carried out in a n-hexane solution of sulfur monochloride (S₂Cl₂). Electron micrograph of crosslinked products indicates the structure of core-shell type polymer microspheres. It is found from NMR and turbi+imetric measurements that the solubility of core-shell type polymer microspheres depends strongly on that of block chains comprising the shell portion. The particle size of these microspheres shows a narrow distribution.     

Silicon hydrides and nickel complexes : III. Hydrosilylation of olefins with dichloro[1,2-bis-(dimethylphosphino)-1,2-dicarba-closo-dodecaborane]-nickel(II) as catalyst

The hydrosilylation of olefins catalyzed by nickel(II) chloride complexed with 1,2-bis(dimethylphosphino)-1,2-dicarba-closo-dodecaborane produces terminal and internal adducts in comparable amounts. This unusual feature of the reaction is explained in terms of the electron-accepting nature of the carboranyl group.     

Palladium catalyzed synthesis of tertiary allylamines. Utilization of α-nitro olefins as allylic nitro compounds

Reaction of α-nitro olefins with secondary amines in the presence of palladium(O) catalyst affords allylic amines.     

Mononuclear five-coordinate molybdenum(IV) and -(V) monosulfide complexes coordinated with dithiolene ligands: reversible redox of Mo(V)/Mo(IV) and irreversible dimerization of [MoVS]- cores to a dinuclear [MoV2(mu-S)2]2- Core

A mononuclear five-coordinate molybdenum(IV) monosulfide complex, (Et4N)2[MoS(L)2] (L = cyclohexene-1,2-dithiolate) (1), was obtained and characterized by IR, UV-vis spectroscopic methods, and X-ray crystallography. 1 was oxidized by an equivalent ferrocenium cation to give the corresponding mononuclear molybdenum(V) complex, (Et4N)[MoS(L)2] (2), which was stable for a few minutes under a lower concentration than 0.3 mM and then further dimerized to (Et4N)2[Mo(L)2]2(mu-S)2 (3).