The interface of the Ising model and the Brownian sheet

We study the limit theorem related to the interface of the three-dimensional Ising model. Dobrushin proved that the interface does not fluctuate and becomes rigid for sufficiently large. We define the random fieldX ^L (t, s), 0t, s1, on the interface, and prove that X^L(t, s) converges to the Brownian sheet as L for sufficiently large, whereL denotes the size of the system. This result does not mean that the interface itself converges to the Brownian sheet.     

Visualization of Magnetization Transfer Effect in Polyethylene Glycol Impregnated Waterlogged Wood

To visualize the condition of impregnation of polyethylene glycol (PEG) in waterlogged wood, we demonstrated magnetic transfer (MT) magnetic resonance imaging (MRI) through a series of process of PEG impregnation. Three different samples were examined; reference wood, 10 cm cut wood, and 5 cm cut wood. During this study, the upper section sample was kept immersed in water, for the middle and lower sections the concentration of PEG solution was changed at 20 wt% intervals from 20 to 100 wt%. The impregnated periods of each PEG solution concentration were 14 days. Then, MR imaging were performed with/without MT pulse. The MTR value for both 10 cm- and 5 cm-samples were shown to decrease at 20 wt% PEG at peak concentration. When the sample volume was large, e.g., 10 cm-sample, the MTR value decreased to 100 wt% PEG concentration. In contrast, when a sample volume was small, e.g., 5 cm-sample, MTR value decreased to 60 wt% PEG concentration. In conclusion, MTR analysis makes it possible to nondestructively visualize and evaluate the inner condition concerning the PEG impregnation method for waterlogged wood.     

Wilsonian RG Analysis of the P-wave Nucleon–Nucleon Scattering Including Pions

We perform a Wilsonian renormalization group analysis for the nucleon–nucleon scattering in the P waves in the nuclear effective field theory including pions, in a similar way to the one done for the S-waves in our previous paper. We emphasize that the one-pion exchange interaction with large momentum transfer is of the same order as the leading contact interaction, so that there is no mismatch of the power counting. It is explicitly shown by obtaining consistent sets of renormalization group equations, that the cutoff dependence generated by the loop diagrams containing pion exchanges can be compensated by the cutoff dependence of the coupling constants of the contact interactions.     

χ polarization induced in molecular glass of conjugated compound by all-optical poling

The paper presents the first report on χ⁽²⁾ polarization induced in molecular glass of conjugated compound by all-optical poling. Transparent thin film of molecular glass of 1,4-bis[2-[4-[N,N-di(p-tolyl)amino]phenyl]vinyl]benzene (BTAPVB) was prepared using a spin-cast technique. Dipolar as well as octupolar components in BTAPVB contributed to the formation of photoinduced χ⁽²⁾ polarization. Growth rate of χ⁽²⁾ polarization has good linear relation with E_ω⁴E_2ω, which suggested that the simultaneous processes of two-photon (ω + 2ω) and three-photon (ω + ω + ω) excitation on the same electronic level contributed to the formation of photoinduced χ⁽²⁾ polarization.     

Optimization of the surface texture for silicon carbide sliding in water

Surface texturing has been recognized as an effective means to improve the tribological performances of sliding surfaces. Usually, generation additional hydrodynamic pressure to increase the load carrying capacity is regarded as the most significant effect of surface texture. In the case of silicon carbide sliding against identical material in water, the experimental results indicate that surface texture is also helpful to improve the running-in progress to smooth the contact surfaces, showing another reason to result in low friction. Based on the consideration of enhancing the generation of hydrodynamic pressure and improving running-in progress, a surface texture pattern, which was combined with large (circle, 350 μm in diameter) and small (rectangular, 40 μm in length) dimples, was designed to maximize the texture effect on the load carrying capacity of SiC surfaces sliding in water. The friction coefficient of such textured surface was evaluated and compared with that of untextured and those only with large or small dimples only. The friction reduction mechanisms of the patterns with different dimples in size are discussed.     

Nonlocal magnetic field-tuned quantum criticality in cubic CeIn(3-x)Sn(x) (x = 0.25)

We show that antiferromagnetism in lightly (approximately 8%) Sn-doped CeIn3 terminates at a critical field mu0H(c) = 42 +/- 2 T. Electrical transport and thermodynamic measurements reveal the effective mass m* not to diverge, suggesting that cubic CeIn3 is representative of a critical spin-density wave (SDW) scenario, unlike the local quantum critical points reported in anisotropic systems such as CeCu(6-x)Au(x) and YbRh2Si(2-x)Ge(x). The existence of a maximum in m* at a lower field mu0H(x) = 30 +/- 1 T may be interpreted as a field-induced crossover from local moment to SDW behavior as the Néel temperature falls below the Fermi temperature.     

Changes in Hip and Knee Muscle Strength in Patients Following Total Hip Arthroplasty

Objective: To investigate changes in hip and knee muscle strength in patients before and after total hip arthroplasty (THA) in comparison with that in healthy adults. Methods: The study included 21 women who underwent unilateral THA (THA group) and 21 age-matched healthy women (healthy group). Maximal isometric strengths of hip flexors, extensors, and abductors, and knee extensors and flexors were measured before surgery and at 4 weeks and 6 months after surgery. Results: Before surgery, muscle strength on both sides, except for hip flexors on the uninvolved side, was significantly lower in the THA group than the corresponding muscle strength in the healthy group. Up to 6 months after THA, strength of all muscle groups on both sides was significantly improved compared with their preoperative status, although the knee extensor strength on the involved side temporarily worsened at 4 weeks. However, the strength of hip extensors and knee extensors on the involved side, and hip abductors on both sides in the THA group remained below that in the healthy group. Conclusions: Our results suggest that rehabilitation specialists should consider increasing the focus on the uninvolved side and encourage patients to continue strength training beyond 6 months after surgery.     

Temperature Dependence of the Threshold Current and the Lasing Wavelength in 1.3-μm GalnNAs/GaAs Single Quantum Well Laser Diode

Temperature stability of the threshold current and the lasing wavelength is investigated in a 1.3-μm GaInNAs/ GaAs single quantum-well laser. The measured characteristic-temperature was 88 K. The small wavelength shift per change in temperature of 0.35 nm/°C was obtained, indicating the superior lasing-wavelength stability. Therefore, it is shown experimentally that GaInNAs is very promising material for the fabrication of light source with excellent high-temperature performance for optical fiber communications.     

Bit-rate Flexible Picosecond Pulse Width Conversion with All-optical Mono-stable Multivibrator Laser Diode

An optical mono-stable multivibrator laser diode (MM-LD) is realized by using a multi-electrode distributed feedback laser diode. All-optical pulse-width conversion of ultra-short pulses to non-return-to-zero (NRZ) is achieved using an MM-LD. The MM-LD is adopted for a wide range of bit-rates between 2-10 Gbit/s by tuning the DC bias. Data format transformation from 10-Gbit/s return-to-zero optical signals to NRZ optical-signals is achieved with error free operation. Converted optical signals, which have a narrower spectral bandwidth and lower peak power than when input, are transmitted using a 1.3-μm zero dispersion fiber (1.3Aλ₀-SMF).