Synthesis of a novel epoxy resin containing diphenylether moiety and thermal properties of its cured polymer with phenol novolac

A new type of epoxy resin containing 4,4′-diphenylether moiety in the backbone (2) was synthesized, and was confirmed by gel permeation chromatography, infrared spectroscopy, and ¹H nuclear magnetic resonance spectroscopy. In addition, in order to evaluate the influence of 4,4′-diphenylether moiety in the structure, epoxy resins having 4,4′-biphenylene moiety (4) and having 1,4-phenylene moiety (6) in place of 4,4′-diphenylether moiety were synthesized. The cured polymer obtained through the curing reaction between the new diphenylether-containing epoxy resin and phenol novolac was used for making a comparison of its thermal and physical properties with those obtained from 4, 6, and bisphenol-A (4,4′-isopropylidenediphenol) type epoxy resin. The cured polymer obtained from 2 showed markedly higher anaerobic char yield at 700°C of 44.0 wt %, higher fracture toughness, and higher mechanical strength and modulus. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3687–3693, 1999     

Retention Behavior of Nucleic Acid Bases and Purine Derivatives on Titania

The retention of nucleic acid bases and purine derivatives on titania was studied using a 0.4 mM acetic acid–sodium acetate buffer (pH 6.0) and 70% aqueous methanol as mobile phases. We observed that the retention strength of tested analytes on titania was dependent on the structural differences between pyrimidine and purine skeletons and the variety and number of substituents. The retention order was purine derivatives with methyl groups, pyrimidine bases and purine derivatives with hydrophilic functional groups, which were retained most strongly on titania. We concluded that the retention of each analyte was caused by the analyte’s hydrophobicity in the case of purine derivatives with methyl groups and pyrimidine bases. In the case of purine and its derivatives with hydrophilic functional groups, it was considered that the retention was dependent on the analyte’s ability to form chelates, and the variety and number of functional groups on C6 and C2.     

Fast Water Relaxation through One‐Dimensional Channels by Rapid Energy Transfer

Water in carbon nanotubes is surrounded by hydrophobic carbon surfaces and shows anomalous structural and fast transport properties. However, the dynamics of water in hydrophobic nanospaces is only phenomenologically understood. In this study, water dynamics in hydrophobic carbon nanotubes is evaluated based on water relaxation using nuclear magnetic resonance spectroscopy and molecular dynamics simulations. Extremely fast relaxation (0.001 s) of water confined in carbon nanotubes of 1 nm in diameter on average is observed; the relaxation times of water confined in carbon nanotubes with an average diameter of 2 nm (0.40 s) is similar to that of bulk water (0.44 s). The extremely fast relaxation time of water confined in carbon nanotubes with an average diameter of 1 nm is a result of frequent energy transfer between water and carbon surfaces. Water relaxation in carbon nanotubes of average diameter 2 nm is slow because of the limited number of collisions between water molecules. The dynamics of interfacial water can therefore be controlled by varying the size of the hydrophobic nanospace.     

Crystal structure of ethene-/α-olefin copolymers with various long comonomers (C8–C26)

Ethene-/α-olefin copolymers having a wide range of comonomers between 8 and 26 carbon atoms in length were characterized by wide angle X-ray diffraction (WAXD). It was found that the crystallinities for the shorter comonomers (C₈, C₁₂) matched fairly well with the crystallinities from DSC and volumetric measurements, while for the longer comonomers (C₁₈, C₂₆) distinct differences between the three methods were found. This was explained by the presence of an additional crystalline phase of the side chains slightly deforming the amorphous peak.     

Permeability control in electro‐sensitive microcapsules with immobilized ferroelectric liquid crystalline segments

Nylon‐polystyrene microcapsules with immobilized ferroelectric liquid crystalline segments were prepared, and permeability control of an encapsulated core material was investigated under an external electric field. A ferroelectric liquid crystal monomer possessing both mesogenicity and chirality responded effectively to the external electrical field. Permeation of the material (oxprenolol) contained in the inner aqueous core of the microcapsules was enhanced under a weak electric field (2 V). Furthermore, the permeability of oxprenolol did not depend on the external electric field in the absence of the ferroelectric liquid crystal segments. To clarify the controlled‐release mechanism of the core material, the light transmittance of the polymer membranes was quantitatively evaluated under an external electric field using a handmade polarized light transmittance apparatus. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1749–1757, 2008     

Biobased myo-inositol as nucleator and stabilizer for poly(lactic acid)

myo-Inositol made from a biomass feedstock was used as an additive for poly (l-lactic acid) (PLLA) which was also made from biomass feedstock. The crystallization and stabilization of PLLA by the addition of myo-inositol were evaluated by the melt injection molding process. While the isothermal crystallization of PLLA at 100 °C had finished over 14 min after melting, that of PLLA with 5 wt% myo-inositol finished within 2 min. The crystal growth of PLLA started when the myo-Inositol crystal was added, and the crystallization was promoted. Furthermore, the molecular weight of PLLA with myo-inositol did not decrease during the melt-mixed at 200 °C, different from that of PLLA without the myo-inositol. myo-Inositol prevented the degradation of PLLA during the thermal melting process. The biomass carbon ratio measured by the accelerator mass spectroscopy method showed that the PLLA with 5 wt% myo-inositol was a fully biobased material. It was demonstrated that myo-inositol was a multi-functional biobased additive for the modification of PLLA without decreasing its mechanical properties.     

Dynamic properties of combustion instability in a lean premixed gas-turbine combustor

We experimentally investigate the dynamic behavior of the combustion instability in a lean premixed gas-turbine combustor from the viewpoint of nonlinear dynamics. A nonlinear time series analysis in combination with a surrogate data method clearly reveals that as the equivalence ratio increases, the dynamic behavior of the combustion instability undergoes a significant transition from stochastic fluctuation to periodic oscillation through low-dimensional chaotic oscillation. We also show that a nonlinear forecasting method is useful for predicting the short-term dynamic behavior of the combustion instability in a lean premixed gas-turbine combustor, which has not been addressed in the fields of combustion science and physics.