Direct and quantitative monitoring of catalytic organic reactions under heterogeneous conditions using direct analysis in real time mass spectrometry

This new method overcomes problems of conventional analytical methodologies such as light scattering and sampling reproducibility issues. We used this method for mechanistic studies of catalytic reactions under heterogeneous conditions. Direct-type hydroxymethylation reactions and Mukaiyama-type hydroxymethylation reactions both catalyzed by a scandium–bipyridine ligand complex under micellar conditions were employed as examples of heterogeneous reactions. For direct-type hydroxymethylation reactions, initial reaction rate assays revealed first-order dependency on both substrate and catalyst. On the other hand, Mukaiyama-type hydroxymethylation reactions showed first-order rate dependency on substrate, zero-order on catalyst and saturation kinetics on formaldehyde.

A direct and quantitative method for monitoring heterogeneous organic reactions has been developed by using direct analysis in real time mass spectrometry (DART-MS) with an isotope-labeled reaction product as an internal standard.     

The first example of regiospecific magnesium carbenoid 1,3-CH insertion: its mechanism and stereochemistry

Addition reaction of two geometrical isomers of 1-chlorovinyl p-tolyl sulfoxides, derived from unsymmetrical ketones and chloromethyl p-tolyl sulfoxide, with lithium enolate of tert-butyl acetate gave single isomers of the adduct, respectively. Treatment of each diastereomer with i-PrMgCl resulted in the formation of magnesium carbenoids. Highly regiospecific 1,3-CH insertion reaction was found to take place from the magnesium carbenoids to afford cyclopropanes in high yields. Stereochemistry of the adducts, reaction mechanism, and origin of the regiospecificity are discussed.     

Photoinduced ionic polymerization. III. Cationic polymerization and copolymerization of cyclohexene oxide and α-methylstyrene in the presence of pyromellitic dianhydride

The photoinduced ionic polymerization of cyclohexene oxide was studied in the presence of pyromellitic dianhydride. The polymerization is initiated by the excited chargetransfer complex between cyclohexene oxide and the electron-acceptor and proceeds by a cationic mechanism. Photoinduced cationic polymerization of α-methylstyrene was also observed in the presence of pyromellitic dianhydride. The initiation mechanism of the polymerization was elucidated by means of electron spin resonance measurements. The concentration of pyromellitic dianhydride anion-radicals measured in this way was found to be proportional to the rate of polymerization. This result shows clearly that the photopolymerization is initiated by cation-radicals formed from photoexcited donoracceptor complexes. The attempted photocopolymerization of cyclohexene oxide and α-methylstyrene gave a mixture of homopolymers. The composition of the product depends on the wavelength of the light used.     

m-Diethynylbenzene macrocycles: syntheses and self-association behavior in solution

m-Diethynylbenzene macrocycles (DBMs), buta-1,3-diyne-bridged [4(n)]metacyclophanes, have been synthesized and their self-association behaviors in solution were investigated. Cyclic tetramers, hexamers, and octamers of DBMs having exo-annular octyl, hexadecyl, and 3,6,9-trioxadecyl ester groups were prepared by intermolecular oxidative coupling of dimer units or intramolecular cyclization of the corresponding open-chain oligomers. The aggregation properties were investigated by two methods, the (1)H NMR spectra and the vapor pressure osmometry (VPO). Although some discrepancies were observed between the association constants obtained from the two methods, the qualitative view was consistent with each other. The analysis of self-aggregation by VPO revealed unique aggregation behavior of DBMs in acetone and toluene, which was not elucidated by the NMR method. Namely, the association constants for infinite association are several times larger than the dimerization constant, suggesting that the aggregation is enhanced by the formation of dimers (a nucleation mechanism). In polar solvents, DBMs aggregate more strongly than in chloroform due to the solvophobic interactions between the macrocyclic framework and the solvents. Moreover, DBMs self-associate in aromatic solvents such as toluene and o-xylene more readily than in chloroform. In particular, the hexameric DBM having a large macrocyclic cavity exhibits extremely large association constants in aromatic solvents. By comparing the aggregation properties of DBMs with the corresponding acyclic oligomers, the effect of the macrocyclic structure on the aggregation propensity was clarified. Finally, it turned out that DBMs tend to aggregate more readily than the corresponding phenylacetylene macrocycles, acetylene-bridged [2(n)]metacyclophanes, owing to the withdrawal of the electron density from the aromatic rings by the butadiyne linkages which facilitates pi-pi stacking interactions.     

Radiation-induced solid-state polymerization of trioxane under high pressure

The in-source polymerization of trioxane in the solid state was investigated over a wide range of temperature and pressure, i.e., from 30 to 140°C and up to 7000 kg/cm², respectively. In the polymerization that was carried out slightly below the melting point under pressure, the higher the pressure, the higher the rate of polymerization. It was confirmed that the maximum rate of solid-state polymerization of trioxane occurs near the melting points, even under elevated pressure. The rate of polymerization decreased with increasing pressure at constant temperature. The shape of the time–conversion curves may be classified into two types, i.e., one which is typical of high pressure and low temperature, and the other which is typical of low pressure and high temperature. Changes in the shape of the conversion—intrinsic viscosity curves occurred coincidentally. Thus, three regions for the different “polymerization characteristic” were determined as functions of polymerization temperature and pressure. Explanations are given for the above-mentioned polymerization characteristic.     

Single crystal EPR studies of the reduced active site of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F

In the catalytic cycle of [NiFe] hydrogenase the paramagnetic Ni-C intermediate is of key importance, since it is believed to carry the substrate hydrogen, albeit in a yet unknown geometry. Upon illumination at low temperatures, Ni-C is converted to the so-called Ni-L state with markedly different spectroscopic parameters. It is suspected that Ni-L has lost the "substrate hydrogen". In this work, both paramagnetic states have been generated in single crystals obtained from the [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F. Evaluation of the orientation dependent spectra yielded the magnitudes of the g tensors and their orientations in the crystal axes system for both Ni-C and Ni-L. The g tensors could further be related to the atomic structure by comparison with the X-ray crystallographic structure of the reduced enzyme. Although the g tensor magnitudes of Ni-C and Ni-L are quite different, the orientations of the resulting g tensors are very similar but differ from those obtained earlier for Ni-A and Ni-B (Trofanchuk et al. J. Biol. Inorg. Chem. 2000, 5, 36-44). The g tensors were also calculated by density functional theory (DFT) methods using various structural models of the active site. The calculated g tensor of Ni-C is, concerning magnitudes and orientation, in good agreement with the experimental one for a formal Ni(III) oxidation state with a hydride (H(-)) bridge between the Ni and the Fe atom. Satisfying agreement is obtained for the Ni-L state when a formal Ni(I) oxidation state is assumed for this species with a proton (H(+)) removed from the bridge between the nickel and the iron atom.     

A facile synthesis of 1-cycloalkenyl isothiocyanates with silicon tetraisothiocyanate

The reaction of cycloalkanones with silicon tetraisothiocyanate in the presence of (Me₃SiO)₂SO₂^?nBu₃SnF or Zn(NCS)₂ provides 1-cycloalkenyl isothiocyanates in good yields under mild conditions.     

Methane Decomposition in a Barium Titanate Packed-Bed Nonthermal Plasma Reactor

The behavior of lattice oxygen species of the ferroelectric material during methane oxidation was investigated using a nonthermal plasma reactor packed with BaTiO ₃ pellets. Lattice oxygen species in BaTiO ₃ play an important role in the formation of N ₂ O and the oxidation of CH ₄ . The oxidation products such as CO and CO ₂ were formed from independent reaction pathways. Lattice oxygen species were able to preferentially oxidize the carbon species deposited on the pellet surface into CO. Also, N ₂ O and NO _x were independently formed in the N ₂–O ₂ reaction, suggesting that different oxygen species give N ₂ O and NO _x. N ₂ O was produced by the oxidation of molecular nitrogen with lattice oxygen species.     

Analysis of phenothiazines in human body fluids using disk solid-phase extraction and liquid chromatography

Seven phenothiazine derivatives, perazine, perphenazine, prochlorperazine, propericiazine, thioproperazine, trifluoperazine, and flupentixol, have been found to be extractable from human plasma and urine samples using disk solid-phase extraction (SPE) with an Empore C18 cartridge. Human plasma and urine (1 mL each) containing the 7 phenothiazine derivatives were mixed with 2 mL of 0.1M NaOH and 7 mL distilled water and then poured into the disk SPE cartridges. The drugs were eluted with 1 mL chloroform- acetonitrile (8 + 2) and determined by liquid chromatography with ammonium formate/formic acid-acetonitrile gradient elution. The detection was performed by ultraviolet absorption at 250 nm. The separation of the 7 phenothiazine derivatives from each other and from impurities was generally satisfactory using a SymmetryShield RP8 column (150 x 2.1 mm id, 3.5 microm particle size). The recoveries of the 7 phenothiazine derivatives spiked into plasma and urine samples were 64.0-89.9% and 65.1-92.1%, respectively. Regression equations for the 7 phenothiazine derivatives showed excellent linearity, with detection limits of 0.021-0.30 microg/mL for plasma and 0.017-0.30 microg/mL for urine. The within-day and day-to-day coefficients of variation for both samples were commonly below 9.0 and 14.9%, respectively.     

Phase transfer catalysis in dehydrofluorination of poly(vinylidene fluoride) by aqueous sodium hydroxide solutions

The reaction of poly(vinylidene fluoride) (PVDF) powder with aqueous sodium hydroxide solutions in the presence of quaternary ammonium or phosphonium halides as phase transfer catalysts afforded dehydrofluorinated polymers. The structure of the products was investigated by infrared spetroscopy, and a fluorine-substituted conjugated polyene structure was suggested which was found to be stable against air oxidation. Tetrabutylammonium bromide and tetrabutylphosphonium bromide were the most active among the catalysts used. The effects of the reaction conditions on the conversion are described. The treatment of PVDF films under phase transfer conditions increased the wettability of the surface and electric conductivity. The reaction of PVDF with potassium hydroxide in 2-propanol proceeded not only by elimination but also by substitution of hydroxide ions.