Coronenetetraimide‐Centered Cruciform Pentamers Containing Multiporphyrin Units: Synthesis and Sequential Photoinduced Energy‐ and Electron‐Transfer Dynamics

A series of coronenetetraimide (CorTIm)‐centered cruciform pentamers containing multiporphyrin units, in which four porphyrin units are covalently linked to a CorTIm core through benzyl linkages, were designed and synthesized to investigate their structural, spectroscopic, and electrochemical properties as well as photoinduced electron‐ and energy‐transfer dynamics. These systems afforded the first synthetic case of coroneneimide derivatives covalently linked with dye molecules. The steady‐state absorption and electrochemical results indicate that a CorTIm and four porphyrin units were successfully characterized by the corresponding reference monomers. In contrast, the steady‐state fluorescence measurements demonstrated that strong fluorescence quenching relative to the corresponding monomer units was observed in these pentamers. Nanosecond laser flash photolysis measurements revealed the occurrence of intermolecular electron transfer from triplet excited state of zinc porphyrins to CorTIm. Femtosecond laser‐induced transient absorption measurements for excitation of the CorTIm unit clearly demonstrate the sequential photoinduced energy and electron transfer between CorTIm and porphyrins, that is, occurrence of the initial energy transfer from CorTIm (energy donor) to porphyrins (energy acceptor) and subsequent electron transfer from porphyrins (electron donor) to CorTIm (electron acceptor) in these pentamers, whereas only the electron‐transfer process from porphyrins to CorTIm was observed when we mainly excite porphyrin units. Finally, construction of high‐order supramolecular patterning of these pentamers was performed by utilizing self‐assembly and physical dewetting during the evaporation of solvent.     

Reversible strain gage

A reversible strain gage was developed for accurately measuring thermal strains, especially for use on large structures where strain gages cannot be welded. These strain gages can be peeled after taking required apparentstrain measurements in a furnace and can be attached reverse-side-up at the points of interest on a test structure. After many trials, a polyimide strain gage was developed that is the same on both the base side and the cover side. The thermal characteristics of the reversible strain gage—repeatability of apparent strain, gage-factor change, creep, drift and the output for a given mechanical strain—were investigated. The repeatability of apparent strains for 100 reversible gages was within 60 microstrain of difference at 250°C. The output of reversible gages for mechanical strain, after 2 to 3 heat cycles which were peeled and cemented in the reverse-side-up position, almost coincided with those of virgin reversible gages.Paper was presented at Fourth SESA International Congress on Experimental Mechanics held in Boston, MA on May 25–30, 1980     

Buffers to suppress sodium dodecyl sulfate adsorption to polyethylene oxide for protein separation on capillary polymer electrophoresis

Although polyethylene oxide (PEO) offers several advantages as a sieving polymer in SDS capillary polymer electrophoresis (SDS-CPE), solution properties of PEO cause deterioration in the electrophoresis because PEO in solution aggregates itself, degrades into smaller pieces, and forms polymer-micelle complexes with SDS. We examined protein separation on SDS-CPE with PEO as a sieving matrix in four individual buffer solutions: Tris-CHES, Tris-Gly, Tris-Tricine, and Tris-HCl buffers. The solution properties of PEO as a sieving matrix in those buffers were examined by dynamic light scattering (DLS) and by surface tension. Preferential SDS adsorption onto PEO disturbed protein-SDS complexation and impaired the protein separation efficiency. Substantial adsorption of SDS to PEO was particularly observed in Tris-Gly buffer. The Tris-CHES buffer prevented SDS from adsorbing onto the PEO. Only Tris-CHES buffer achieved separation of six proteins. This study demonstrated efficient protein separation on SDS-CPE with PEO.     

Effect of preparative conditions on crystallinity of apatite particles obtained from simulated body fluids

Preparation of colloidal hydroxyapatite (HAp) particles under body fluid conditions was investigated with focusing on the effect of preparative conditions on crystallinity of the resulting particles. Tris(hydroxymethyl)aminomethane was added to 1.5SBF (a solution having 1.5 times higher ion concentrations than those of a simulated body fluid, SBF) to increase the solution pH, which resulted in induction of homogeneous nucleation of HAp in the solution. Colloidal HAp particles having diameters about 300 nm were obtained. When the reaction was proceeded at 70°C and the sample was dried by heating, it was effective to obtain HAp particles having high crystallinity. Experimental results support that remaining water in the sample contributed to increase HAp crystallinity.     

Construction of hydrogen-bonded ternary organic crystals derived from L-tartaric acid and their application to enantioseparation of secondary alcohols

Ternary organic crystals consisting of an L-tartaric acid-derived dicarboxylic acid, a commercially available achiral diamine, and a chiral secondary alcohol have been developed and characterized by X-ray crystallography. 1D, 2D, and 3D hydrogen-bonded supramolecular networks were constructed, depending on the structure of the diamine used. Benzylic and aliphatic secondary alcohols were enantioselectively incorporated into the crystal and were successfully enantioseparated with up to 86 and 79% enantiomeric excess (ee), respectively. Selective incorporation of one enantiomer of 2-butanol, which is a small chiral aliphatic alcohol, was achieved by the cooperative effects of hydrogen bonds, CH···π interactions, and van der Waals interactions between the guest and host molecules, with the aid of two water molecules. The high host potential of the binary supramolecular system is mainly attributed to the skewed conformation of two rigid aromatic groups of tartaric acid derivatives, which prevents dense packing of the molecules and enhances the formation of multicomponent inclusion crystals.     

Mass balance method for purity assay of phthalic acid esters: development of primary reference materials as traceability sources in the Japan Calibration Service System

Purity assay of high-purity materials (HPMs) of phthalic acid esters (PAEs) was carried out by means of a mass balance method. In this method, chromatographic methods such as gas chromatography-flame ionization detector (GC-FID) and/or high-performance liquid chromatography (HPLC) in combination with other methods such as Karl-Fischer (KF) titration and vacuum evaporation (VE) were applied. The sum of the impurities estimated by these methods allowed the estimation of the purity of the main component by difference. Seven PAEs with varying side chain structures and levels of impurities were analysed on a systematic way in which impurities were classified into several groups in terms of their abundance, availability of qualitative information and availability of authentic compounds, etc. The absolute quantity of each impurity was determined by GC-FID and/or HPLC based on the calibration made by the authentic compounds of impurities whenever available. The purities in mass fraction of these PAEs were certified at the National Metrology Institute of Japan (NMIJ), and the PAEs were registered as primary reference materials playing an essential role in linking the metrological traceability of the Japan Calibration Service System (JCSS) to the International System of Units (SI).     

Proposal for generation of high-intensity monochromatic Cherenkov radiation in THz range by femtosecond electron bunches in impurity-doped semiconductor tube

A novel method to generate high-power THz radiation is proposed. If a beam with a bunch length on the order of 100 fs is injected into an electron–hole plasma of a semiconductor with a plasma frequency on the order of THz, THz wake fields are coherently generated. If the beam moves on the axis of a hollow tube covered by a metal, the frequency spectrum of the radiation is composed of discrete components. Monochromatic radiation is obtained by making only the lowest frequency component coherent.     

Communication: a new hybrid exchange correlation functional for band-gap calculations using a short-range Gaussian attenuation (Gaussian-Perdue-Burke-Ernzerhof)

We have developed a new hybrid functional [Gaussian-Perdue-Burke-Ernzerhof (Gau-PBE)] that is suitable for the calculation of solid state bandgaps using a periodic boundary condition. The characteristic of this functional is the use of a Gaussian attenuation scheme (Gau) to include a short-range Hartree-Fock (HF) exchange. This new functional can perform barrier height calculations with an accuracy comparable to the middle-range hybrid functional and bandgap calculations with an accuracy comparable to the Heyd-Scuseria-Ernzerhof (HSE) functional. However, the point is that the performance can be achieved using a Gaussian HF exchange, while the HISS functional calculates twice HF-exchange integrations using an error function to obtain both performances. In addition, Gau-PBE functional can decrease the time cost of bandgap calculations by an average of 40% compared to the HSE functional.     

Development of quality assessment method for optically active food flavor chemicals

A quality assessment method for commercially available, optically active flavor compounds, namely, menthol, menthyl acetate, borneol, perillaldehyde, and 1,8-cineol, was developed. A gas chromatograph equipped with a flame ionization detector and a DB-5ms capillary column was used for the chemical purity test. A GC/MS with a beta-DEX cyclodextrin column was used for the optical purity test, by which the enantiomeric separation of each flavor compound was achieved. Enantiomeric excess was calculated as an expression of optical purity. Of the 25 standard samples subjected to the chemical purity test, six were found to have lower purity than the data provided by the manufacturers. When the same samples were subjected to the optical purity test, 11 were found to have lower purity than that indicated on the reagent labels. These results suggest that there is a need to conduct an optical purity test, in addition to a chemical purity test, for the quality assessment of flavor standards.