Leaching behavior of metal-containing species in residual oils with different organic solvents

The leaching behavior of two different residual oils is investigated with 24 organic solvents including alkanes, aromatics, esters, ethers ketones, alcohols and nitrogen compounds. A 2-g portion of sample oil is shaken with 20 ml of the organic solvent. The leaching of the organic matrix of the oil is determined by weighing the dissolved organic matrix after removal of solvent. The leaching of vanadium, iron and nickel was determined by flame atomic absorption spectrophotometry after ashing of the dissolved fraction. The leaching of those metals depends strongly on the solvent used; for example, vanadine is almost completely leached into toluene, but only slightly into methanol. The leaching of iron is poor compared with that of vanadium or nickel. In most solvents, leaching of those metal-containing species is poorer than that of organic material. Exceptionally, N,N-dimethylformamide is more efficient in leaching vanadium species than organic material.     

State of titanium in Ti-containing silica and silicalite catalysts in relation to their oxidation activity

The nature of active titanium species for epoxidation of olefins with H₂O₂ and t-butyl hydroperoxide has been investigated for titanium silicalite (TS-1), titania silica (TiO₂/SiO₂) prepared by a sol-gel method, and titanium oxide supported on silica by a CVD method (TiO₂/SiO₂-CVD). IR and XANES analyses suggested that Ti in TiO₂/SiO₂ and TiO₂/SiO₂-CVD has a tetrahedral configuration bonded to SiO₂ and that in TS-1 has a configuration composed of >Ti=O or related to it. Their configurations are closely related to their reactivities for epoxidation of olefins in which the former works with t-butyl hydroperoxide and the latter with H₂O₂.     

Hydrodynamic voltammetry at channel electrodes: Part II. Theory of first-order kinetic collection efficiencies

The theory of first-order kinetic collection efficiencies at the double channel electrode is developed for the following two schemes: (I) A±n₁e→B (at the generator electrode), B→^kP (in solution), B±n₂e→Y (at the detector electrode), (II) A±n₁e→B, B→^kA, B±n₂e→Y. The exact expressions for the kinetic collection efficiencies are obtained as ascending and asymptotic series with respect to the kinetic parameter. Further, approximate formulae in exponential forms are given, which hold within an error of about 2% for conventional electrode geometry. Finally, the validity of the approximate procedure, which has been used previously to obtain the kinetic collection efficiencies for fast homogeneous reactions, is discussed in comparison with the present theory.     

Positive heterotropic cooperativity for selective guest binding via electronic communications through a fused zinc porphyrin array

Upon binding with C60 and diamines, such as 4,4'-bipyridine (bpy) and N,N,N',N'-tetramethylhexane-1,6-diamine (TMHDA), cyclic host 1 possessing two electronically coupled binding sites displays negative homotropic cooperativity and positive heterotropic cooperativity, and their ternary mixtures preferentially form inclusion complexes with hetero-guest pairs 1 supersetC60*bpy and 1 supersetC60*TMHDA under appropriate conditions. Spectroscopic titration profiles in toluene at 20 degrees C demonstrated that the association constants (Kassoc) of C60 with monodiamine complexes 1 supersetbpy (2.8 x 105 M-1) and 1 supersetTMHDA (1.5 x 105 M-1) are 8.5 and 4.5 times greater than that of C60 with guest-free 1 (3.3 x 104 M-1), respectively. On the other hand, mono-C60 complex 1 supersetC60 was 6.1 times more accessible than guest-free 1 toward TMHDA. Absorption spectroscopy in the absence of 1 indicated no direct interaction between C60 and diamines.     

Mechanism of plasma-initiated polymerization: Concerning the nature of solvent effects on the lifelike polymerization of water-soluble vinyl monomers

To provide a satisfactory basic understanding of the solvent effect of plasma-initiated polymerization, we have carried out several kinds of polymerizations of various water-soluble vinyl monomers. It has been shown that aqueous solution of such vinyl monomers underwent the polymerizations induced by methyl isobutyrate (MIB) plasma-exposed glass surface. The invisible ultrathin polymer film trapping an active radical species deposited on the plasma-exposed glass surface apparently induced the polymerizations. The efficiency, however, was largely dependent on the solvent used: the solvent can be considered to act as “an initiation-activator” for the lifelike postpolymerization. The nature of the solvent effect was ascribed to the physicomechanical property such as swelling ability and/or solubility toward the ultrathin film formed on the glass surface. Thus it has been suggested that the choice of good-balanced combination between the structural feature of the plasma-induced ultrathin polymer film and the solvent as an initiation-activator is important to achieve activity of a desired solution polymerization.     

Synthesis,structure, and dynamic behavior of cyclopentadienyl-lithium, -sodium,and -potassium annelated with bicyclo[2.2.2]octene units: a systematic study on site exchange of alkali metals on a cyclopentadienyl ring in tetrahydrofuran

Novel cyclopentadienyl (Cp)-alkali metal complexes 1-M and 2-M (M = Li, Na, K), in which the Cp ring is annelated with two bicyclo[2.2.2]octene units and substituted with a phenyl group for 1 and a tert-butyl group for 2, were synthesized, and their structures and dynamic behaviors were investigated by means of X-ray crystallography, dynamic (13)C NMR, and DFT calculations. The X-ray crystallography results indicated that 1-Li, 1-Na, and 2-Na form monomeric contact ion pairs (CIP) with three THF molecules coordinated to the metal atom. Also, in THF-d(8), all of the 1-M and 2-M form monomeric CIP in the ground state. However, variable-temperature (13)C NMR measurements of 1-M and 2-M in THF-d(8) demonstrated dynamic behavior in which the metal ion exchanges positions between the upper and lower faces of the Cp ring. From a study of the concentration dependence of the dynamic behavior, the exchange was found to proceed principally as an intramolecular process at concentration ranges lower than 0.2 M. The experimentally observed deltaG values for the intramolecular exchange process for all the 1-M and 2-M (except for 2-Li, whose intramolecular process was too slow to observe) were found to be quite similar in THF-d(8) solution and to fall within the range of 12-14 kcal mol(-)(1). Within this range, a tendency was observed for the deltaG values to increase as the size of the metal decreased. Theoretical calculations (B3LYP/6-31G(d)) afforded considerably large values as the gas-phase dissociation energy for 1-M (162.7 kcal mol(-)(1) for M = Li; 131.6 kcal mol(-)(1) for M = Na; 110.9 kcal mol(-)(1) for M = K) and for 2-M (170.0 kcal mol(-)(1) for M = Li; 137.5 kcal mol(-)(1) for M = Na; 115.4 kcal mol(-)(1) for M = K). These values should be compensated for by a decrease in the solvation energies for the metal ions with increasing size, as exemplified by the calculated solvation energy for M(+)(Me(2)O)(4), which serves as a model for metal ions solvated with four molecules of THF (-122.9 kcal mol(-)(1) for M = Li; -94.7 kcal mol(-)(1) for M = Na; -67.7 kcal mol(-)(1) for M = K). This compensation results in a small difference in the overall energy for dissociation of 1-M or 2-M in ethereal solutions, thus supporting the similar deltaG values observed for the intramolecular metal exchange.     

A study of excited state molecular vibrations of aromatic hydrocarbons

Vibrational frequencies in excited and ionized states are calculated for primary aromatic hydrocarbons, on the basis of MO calculations of transition energies and normal coordinate calculations for ground state molecules. Results are in good agreement with experiment. Specific activities of certain types of modes, which exhibit large frequency shifts on excitation, are discussed in terms of vibronic coupling.     

Experimental determination of ionization potentials of tetraphenylporphine and metallotetraphenylporphines

Gas-phase ionization potentials of tetraphenylporphine and some metallotetraphenylporphines have been determined by the method of photocurrent measurements in nonpolar solvents reported previously [1]. The values obtained range from 5.9 to 6.3 eV, depending on the central metal ion, correlating well with the reported polarographic oxidation potentials. It has been concluded that photoelectron ejection from these complexes in isooctane occurs from the porphyrin π-system in all cases including Co(II) tetraphenylporphine, in which the electron is thought to be removed from the metal in polar solvents.     

High resolution capillary gas chromatographic hydrocarbon-type analysis of naphtha and gasoline

A slightly modified, commercially available high resolution capillary gas chromatograph and a PC-based data processing system running proprietary software (“PONA”) have been employed in the development of a system for petroleum type analysis which would be equivalent or superior to the FIA (fluorescent indicator adsorption) method in terms of ease of use and the speed, variety, and accuracy of the analytical data produced. The system is capable of performing identification and quantitation of most of the individual components in a complex gasoline sample consisting of more than 230 components and can report weight percentage and/or volume percentage for each component as well as types by carbon number (e.g., isoparaffins, normal paraffins, olefins, naphthenes, aromatic compounds) within a ca. 70 minute analysis cycle. Precolumn sulfonation to trap olefins and aromatic compounds has been used as an complementary technique to the basic mass spectrometric identification of components of interest. The estimation of correction factors for weight percentage (or volume percentage) calculation are also discussed. Comparisons are made between this system and others, and the results indicate that the proposed method supersedes the conventional method employing FIA.