Effects of lignin and hemicellulose contents on dissolution of wood pulp in aqueous NaOH/urea solution

Four species of delignified woodchips with about 1 % lignin content (Chlorite–Woodchips) and a series of softwood pulps with different lignin contents were prepared by sodium chlorite delignification. After mechanical defibration, some Chlorite–Woodchips were directly subjected to dissolution treatment in NaOH/urea solvent; the others were first treated with NaOH solution to remove the hemicellulose to obtain NaOH–Chlorite–Woodchips or oxidized with potassium permanganate (OPP) to remove lignin completely to obtain OPP–Chlorite–Woodchips, and then subjected to the dissolution in NaOH/urea solvent. The results showed that the dissolved proportion of the Chlorite–Woodchips ranged from 36 to 46 %, the dissolved proportion of glucan was within 12 %, and most of the hemicellulose was dissolved in NaOH/urea solvent. Compared with Chlorite–Woodchips, the dissolved proportion of NaOH–Chlorite–Woodchips was lower, but their dissolved proportion of glucan was higher. After further permanganate delignification, both the dissolved proportion of the OPP–Chlorite–Woodchips and the dissolved proportion of glucan of the OPP–Chlorite–Woodchips were higher than those of the Chlorite–Woodchips. However, the dissolved proportion of glucan was still limited to only 15–30 %. The effect of the lignin content of softwood pulps on their dissolution is complicated. With the decrease of the lignin content of softwood pulp from 6.9 to 2.8 %, the dissolved proportion of pulp increased from 14 to 26 %. However, further reduction of lignin content from 2.8 to 0.3 % led to a decrease in the dissolved proportion of pulp from 26 to 12 %. The dissolved proportion of glucan followed the same tendency. These results indicated that the dissolution of wood cellulose in NaOH/urea solvent is not simply controlled by the hemicellulose and lignin contents, but also by some other factors.     

Expression and Characterization of Recombinant GH11 Xylanase from Thermotolerant Streptomyces sp. SWU10

Xylans are major hemicellulose components of plant cell wall which can be hydrolyzed by xylanolytic enzymes. Three forms of endo-β-1,4-xylanases (XynSW1, XynSW2A, and XynSW2B) produced by thermotolerant Streptomyces sp. SWU10 have been reported. In the present study, we described the expression and characterization of the fourth xylanase enzyme from this bacteria, termed XynSW3. The gene containing 726 bp was cloned and expressed in Escherichia coli. The recombinant enzyme (rXynSW3) was purified from cell-free extract to homogeneity using Ni-affinity column chromatography. The apparent molecular mass of rXynSW3 was 48 kDa. Amino acid sequence analysis revealed that it belonged to a xylanase of glycoside hydrolase family 11. The optimum pH and temperature for enzyme activity were 5.5–6.5 and 50 °C, respectively. The enzyme was stable up to 40 °C and in wide pH ranges (pH 0.6–10.3). Xylan without arabinosyl side chain is the most preferable substrate for the enzyme. By using birch wood xylan as substrate, rXynSW3 produced several oligosaccharides in the initial stage of hydrolysis, and their levels increased with time, demonstrating that the enzyme is an endo-acting enzyme. The major products were xylobiose, triose, and tetraose. The rXynSW3 can be applied in several industries such as food, textile, and biofuel industries, and waste treatment.     

Atomic-Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with Efficient CO2 Electrolysis

In situ exsolution of metal nanoparticles in perovskite under reducing atmosphere is employed to generate a highly active metal–oxide interface for CO₂ electrolysis in a solid oxide electrolysis cell. Atomic-scale insight is provided into the exsolution of CoFe alloy nanoparticles in La_0.4Sr_0.6Co_0.2Fe_0.7Mo_0.1O_3−δ (LSCFM) by in situ scanning transmission electron microscopy (STEM) with energy-dispersive X-ray spectroscopy and DFT calculations. The doped Mo atoms occupy B sites of LSCFM, which increases the segregation energy of Co and Fe ions at B sites and improves the structural stability of LSCFM under a reducing atmosphere. In situ STEM measurements visualized sequential exsolution of Co and Fe ions, formation of CoFe alloy nanoparticles, and reversible exsolution and dissolution of CoFe alloy nanoparticles in LSCFM. The metal–oxide interface improves CO₂ adsorption and activation, showing a higher CO₂ electrolysis performance than the LSCFM counterparts.     

Radical copolymerization of N-alkylmaleimides with isobutene and the properties of the resulting alternating copolymers

Radical copolymerization of N-methylmaleimide (MeMI) as well as other N-alkylmaleimides (RMI) and isobutene (IB) was carried out with 2,2′-azobis(isobutyronitrile) as an initiator at 60°C. The initial rate of the copolymerization (R_p) was dependent on the monomer composition and was maximum at the 40 mol % of MeMI in the feed. A solvent effect on the R_p and the monomer reactivity ratio was observed in this copolymerization system, i.e., copolymerization in chloroform produced a higher R_p and an alternating tendency compared with those in dioxane (r_MeMI = 0.14, r_1B = 0 in chloroform and r_MeMI = 0.47, r_1B = 0 in dioxane). The alternating copolymer of RMI and IB shows a high glass transition temperature (T_g) and excellent thermal stability, e.g., the T_g and the thermal decomposition temperature (T_d) were 152 and 363°C, respectively, for the alternating copolymer of MeMI and IB. Both the T_g and T_d increased as the concentration of the MeMI unit in the copolymers increased. Colorless transparent sheets were obtained from press molding the alternating copolymers. They showed excellent mechanical and optical properties. © 1996 John Wiley & Sons, Inc.     

Detailed mechanism of radical high polymerization of sterically hindered dialkyl fumarates

The radical polymerization kinetics and mechanism of sterically hindered dialkyl fumarates (DRF) bearing various ester alkyl groups are described comprehensively. The overall polymerization reactivity of DRF, the initiation mechanism and the reactivity of the primary radicals in the polymerizations with azo initiators, the determination of the propagation and termination rate constants by means of electron spin resonance spectroscopy, the propagation mechanism and the microstructure of the polymers, and the chain rigidity of poly(DRF) and bimolecular termination process are discussed.     

The adsorption structure of nonionic surfactant on the sessile mercury electrode in a thin liquid film

In relation to a colloid stability, the adsorption structure of the Stern layer on a sessile mercury electrode in a thin liquid film of nonionic surfactant was investigated by measuring the double layer capacitance. The Stern capacitance on the electrode in the film could be detected when the measuring frequency used was low, for the resistance of the film was not extremely high but of the order of several thousand ohm. It was found that the adsorption structure of nonionic surfactant in the thin liquid film shows a stratification different from that of bulk.     

An Isolable Radical Anion of an Organosilicon Cluster Containing Only σ Bonds

The radical anion of octa‐tert‐butyloctasilacubane was generated and isolated. The EPR spectrum showed the satellites due to the tertiary ¹³C nuclei of the eight tert‐butyl groups. The X‐ray crystallographic analysis showed that the Si? Si bonds are shortened and the Si? C bonds are elongated compared with those of octa‐tert‐butyloctasilacubane. These results are well explained by the distribution of an unpaired electron in the singly occupied molecular orbital (SOMO).