Analytical aspects of cyanobacterial volatile organic compounds for investigation of their production behavior

In order to fully understand the role of volatile organic compounds (VOCs) under natural conditions, an adaptable analytical method was developed as the first step. β-Ionone, β-cyclocitral, 2-methyl-1-butanol and 3-methyl-1-butanol were simultaneously analyzed in addition to geosmin and 2-MIB using GC/MS with SPME. The slight modification of a known method allowed the simultaneous detection and quantification of these VOCs. The SIM of the 3-methyl-1-butanol was always accompanied by a shoulder peak, suggesting the presence of two compounds. In order to separate both compounds, the GC/MS conditions were optimized, and the additional peak was identified as 2-methyl-1-butanol by direct comparison of the authentic compound, indicating that the Microcystis strain always produces a mixture of 2-methyl-1-butanol and 3-methyl-1-butanol. Furthermore, it was found that 2-methyl-1-butanol and 3-methyl-1-butanol were predominant in the dissolved fractions. β-Cyclocitral was easily oxidized to provide the oxidation product, 2,6,6-trimethylcyclohexene-1-carboxylic acid, which causes the blue color formation of cyanobacteria as a consequence of acid stress. The intact acid could be satisfactorily analyzed using the usual GC/MS without derivatization.     

Anionic polymerization of N,N‐dialkyl‐2‐methylenebut‐3‐enamide: Effect of alkyl substituents on polymerization behavior

Anionic polymerizations of three 1,3‐butadiene derivatives containing different N,N‐dialkyl amide functions, N,N‐diisopropylamide (DiPA), piperidineamide (PiA), and cis‐2,6‐dimethylpiperidineamide (DMPA) were performed under various conditions, and their polymerization behavior was compared with that of N,N‐diethylamide analogue (DEA), which was previously reported. When polymerization of DiPA was performed at ?78 °C with potassium counter ion, only trace amounts of oligomers were formed, whereas polymers with a narrow molecular weight distribution were obtained in moderate yield when DiPA was polymerized at 0 °C in the presence of LiCl. Decrease in molecular weight and broadening of molecular weight distribution were observed when polymerization was performed at a higher temperature of 20 °C, presumably because of the effect of ceiling temperature. In the case of DMPA, no polymer was formed at 0 °C and polymers with relatively broad molecular weight distributions (M_w/M_n = 1.2) were obtained at 20 °C. The polymerization rate of PiA was much faster than that of the other monomers, and poly(PiA) was obtained in high yield even at ?78 °C in 24 h. The microstructure of the resulting polymers were exclusively 1,4‐ for poly(DMPA), whereas 20–30% of the 1,2‐structure was contained in poly(DiPA) and poly(PiA). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3714–3721, 2010     

Excitonic properties of nanostructure semimagnetic semiconductors

Magneto-optical properties of semimagnetic semiconductors with nanometer-scale structures (nanostructures) are described. Superlattices of the CdTe/Cd_{1 − x}Mn_xTe and Cd_{1 − x}Mn_xTe/ZnTe systems and microcrystals of Cd_{1 − x}Mn_xSe were grown by epitaxy and sputtering methods. These semimagnetic semiconductor nanostructures show remarkably enhanced magneto-optical responses in the optical absorption, the luminescence and the dynamics of the confined excitons. The results are interpreted by the quantum-confined excitonic states interacting with the magnetic ion spins involved in the nanostructures.     

An all-silicon linear chain NMR quantum computer

An updated version of our all-silicon quantum computing scheme [T.D. Ladd, J.R. Goldman, F. Yamaguchi, Y. Yamamoto, E. Abe, K.M. Itoh, Phys. Rev. Lett. 89 (2002) 017901. [3]] and the experimental progress towards its realization are discussed. We emphasize the importance of revisiting a wide range of isotope effects which have been explored over the past several decades for the construction of solid-state silicon quantum computers. Using RF decoupling techniques [T.D. Ladd, D. Maryenko, Y. Yamamoto, E. Abe, K.M. Itoh, Phys. Rev. B. 71 (2005) 014401] phase decoherence times T₂=25 s of ²⁹Si nuclear spins in single-crystal Si have been obtained at room temperature. We show that a linear chain of ²⁹Si stable isotopes with nuclear spin I=1/2 embedded in a spin free ²⁸Si stable isotope matrix can form an ideal building block for solid-state quantum information processors, especially, in the form of a quantum memory which requires a large number of operations within T₂ for the continuous error correction.     

Effects of ZnS:Mn/AlN multilayer structure on luminescent properties of nanostructured thin-film EL device

Effects of ZnS:Mn/AlN multilayer structure on luminescent properties of nanostructured (NS) thin-film electroluminescent (TFEL) device of which emission layer is a multilayer composed with ZnS:Mn layers and 0.7-nm-thick AlN interlayers were studied. The bandgap widening and the increased PL efficiency of Mn²⁺ 3d-3d transitions with a decrease in the ZnS:Mn single-layer thickness down to 5 nm were observed, which is ascribed to quantum confinement effects. Meanwhile, the multilayer with 2-nm-thick ZnS:Mn single-layers shows a drop of PL efficiency, indicating the presence of defective region just on AlN. The tendency of the luminous efficiency of the NS-TFEL device against the ZnS:Mn single-layer thickness is similar to the tendency found in the PL efficiency, indicating the importance of the ZnS:Mn/AlN interface for the device performance.     

Spectrophotometric determination of uric acid based on fading of o-hydroxyhydroquinonephthalein-palladium(II)-hexadecyltrimethyl-ammonium complex.

A simple and highly sensitive spectrophotometric method for the determination of uric acid (UA) was established based on fading of the o-hydroxyhydroquinonephthalein-palladium(II)-hexadecyltrimethylammonium complex. In the determination of UA, Beer's law is obeyed in the range of 0.01-0.20 microg ml(-1), with an effective molar absorptivity at 635 nm, the relative standard deviation being 6.5 x 10(5) dm(3) mol(-1) cm(-1) and 1.5% (n = 5). This method is about 20-times more sensitive than the conventional methods. The method was successfully applied to the assay of UA in human urine.     

Palladium‐Catalyzed Direct C?H Arylation of Isoxazoles at the 5‐Position

A palladium‐catalyzed direct arylation of isoxazoles with aryl iodides has been achieved. The C H bond at the 5‐position is activated selectively to give coupling products in moderate to good yields. This direct arylation was applied to the synthesis of a spiro‐type chiral ligand, which proved to be most effective to the palladium‐catalyzed tandem cyclization of a dialkenyl alcohol.     

Asymmetric Total Synthesis of ent‐Pyripyropene A

An asymmetric total synthesis of ent‐pyripyropene A was achieved by a convergent synthetic route. We used our originally developed Ti^III‐catalyzed radical cyclization to construct an AB‐ring portion that consisted of a trans‐decalin skeleton with five contiguous stereogenic centers. The coupling between the AB‐ring and the DE‐ring portions, and a subsequent C‐ring cyclization, led to the total synthesis of ent‐pyripyropene A. An evaluation of the insecticidal activity of ent‐pyripyropene A against two aphid species revealed that ent‐pyripyropene A was 35–175 times less active than naturally occurring pyripyropene A. This result indicated that the biological target of pyripyropene A recognizes the absolute configuration of pyripyropene A.     

Directing/Protecting‐Group‐Free Synthesis of Tetraaryl‐Substituted Pyrazoles through Four Direct Arylations on an Unsubstituted Pyrazole Scaffold

A directing/protecting‐group‐free synthesis of 1,3,4,5‐tetraaryl‐substituted pyrazoles was achieved through four transition metal‐catalyzed direct arylations. Various pyrazoles with four different aryl rings were obtained using readily available reagents from an unsubstituted pyrazole. Two aryl‐substituted pyrazoles showed intense violet fluorescence, high quantum yields (Φ_f=0.68, 0.64), and large Stokes shifts (19000, 15200 cm^?1).     

The effect of boric acid on the vapour liquid equilibrium of aqueous potassium carbonate

Aqueous potassium carbonate has seen renewed interest as a viable solvent for pre and post combustion carbon capture and storage. However, slow reaction kinetics may require the addition of a rate promoter such as boric acid to improve efficiency. The vapour liquid equilibrium of 30 weight percent potassium carbonate with 0, 3 and 5 weight percent boric acid was investigated at 50 and 70 °C using a dynamic inert gas stripping method. By estimating the boric acid reactions an Electrolyte-NRTL model was able to fit this data and literature results very closely.