Changes in diffusion tensor imaging (DTI) eigenvalues of skeletal muscle due to hybrid exercise training

Several studies have proposed the cell membrane as the main water diffusion restricting factor in the skeletal muscle cell. We sought to establish whether a particular form of exercise training (which is likely to affect only intracellular components) could affect water diffusion. The purpose of this study is to characterise prospectively the changes in diffusion tensor imaging (DTI) eigenvalues of thigh muscle resulting from hybrid training (HYBT) in patients with non-alcoholic fatty liver disease (NAFLD). Twenty-one NAFLD patients underwent HYBT for 30 minutes per day, twice a week for 6 months. Patients were scanned using DTI of the thigh pre- and post-HYBT. Fractional anisotropy (FA), apparent diffusion coefficient (ADC), the three eigenvalues lambda 1 (λ1), λ2, λ3, and the maximal cross sectional area (CSA) were measured in bilateral thigh muscles: knee flexors (biceps femoris (BF), semitendinosus (ST), semimembranous (SM)) and knee extensors (medial vastus (MV), intermediate vastus (IV), lateral vastus (LV), and rectus femoris (RF)), and compared pre- and post-HYBT by paired t-test. Muscle strength of extensors (P < 0.01), but not flexors, increased significantly post-HYBT. For FA, ADC and eigenvalues, the overall picture was of increase. Some (P < 0.05 in λ2 and P < 0.01 in λ1) eigenvalues of flexors and all (λ1-λ3) eigenvalues of extensors increased significantly (P < 0.01) post-HYBT. HYBT increased all 3 eigenvalues. We suggest this might be caused by enlargement of muscle intracellular space.     

In-situ X-ray diffraction study on β-CrOOH at high pressure and high-temperature

ABSTRACT

High pressure hydrous phases with distorted rutile-type structure have attracted much interest as potential water reservoirs in the Earth’s mantle. An in-situ X-ray diffraction study of β-CrOOH was performed at high pressures of up to 6.2?GPa and high-temperatures of up to 700?K in order to clarify the temperature effect on compression behaviors of β-CrOOH. The P-V-T data fitted to a Birch–Murnaghan equation of state yielded the following results: isothermal bulk modulus K_T0?=?191(4)?GPa, temperature derivative (?K_T/?T)_P?=??0.04(2)?GPa?K^?1, and volumetric thermal expansion coefficient α?=?3.3(2)?×?10^?5?K^?1. In this study, at 300?K, the a-axis became less compressible at pressures above 1–2?GPa. We found that the pressure where the slopes of a/b and a/c ratios turned positive increased with temperature. This is the first experimental study indicating the temperature dependence of the change in the axial compressibility in distorted rutile-type M³⁺OOH.     

Low Power Penalty Operation of a Wide Input Dynamic Range Cross-Phase Modulation Wavelength Converter

We successfully demonstrated low power penalty operation of a cross-phase modulated (XPM) wavelength converter using a semiconductor optical amplifier (SOA) power equalizer. We also clarified the SOA equalizing level for more adaptive wavelength conversion and achieved a power penalty of less than 1 dB over the wide input dynamic range of 15 dB.     

Analytical method for steady state vibration of system with localized non-linearities using convolution integral and Galerkin method

The analytical method using transfer function or impulse response is very effective for analyzing non-linear systems with localized non-linearities. This is because the number of non-linear equations can be reduced to that of the equations with respect to points connected with the non-linear element. In the present paper, analytical method for the steady state vibration of non-linear system including subharmonic vibration is proposed by utilizing convolution integral and the impulse response. The Galerkin method is introduced to solve the non-linear equations formulated by the convolution integral, and then the steady state vibration is obtained. An advantage of the present method is that stability or instability of the steady state vibration can be discriminated by the transient analysis from convolution integral. The three-degree-of-freedom mass-spring system is shown as a numerical example and the proposed method is verified by comparing with the result by Runge-Kutta-Gill method.     

ESR studies on calcite encrustation on Fili neotectonic fault, Greece

Electron spin resonance (ESR) study was done on calcite encrustation on Fili neotectonic fault surface, Greece. Normally such calcite encrustations on fault surfaces are not observed. Significantly, the ESR study has detected the presence of nitrate NO₃²⁻ radical in this calcite encrustation, havingg _⊥=2.0063±0.0001 and hyperfine coupling constantA _⊥=3.44 mT, the second such detection of nitrate NO₃²⁻ radical following a sample from Scott Glacier, Antarctica. From isochronal thermal annealing measurement the NO₃²⁻ radical was found to be quite stable, only fully annealed at 475°C. This study also shows that the ESR, as a tool, can be suitably applied to date the age of formation of the calcite encrustation with SO₃⁻ as an ESR dating signal by additive γ-ray irradiation. A preliminary estimation indicates the age of formation of calcite precipitation at Fili fault, Greece to be about 5600 years.     

Study of intrinsic localized vibrational modes in micromechanical oscillator arrays

Intrinsic localized modes (ILMs) have been observed in micromechanical cantilever arrays, and their creation, locking, interaction, and relaxation dynamics in the presence of a driver have been studied. The micromechanical array is fabricated in a 300 nm thick silicon-nitride film on a silicon substrate, and consists of up to 248 cantilevers of two alternating lengths. To observe the ILMs in this experimental system a line-shaped laser beam is focused on the 1D cantilever array, and the reflected beam is captured with a fast charge coupled device camera. The array is driven near its highest frequency mode with a piezoelectric transducer. Numerical simulations of the nonlinear Klein-Gordon lattice have been carried out to assist with the detailed interpretation of the experimental results. These include pinning and locking of the ILMs when the driver is on, collisions between ILMs, low frequency excitation modes of the locked ILMs and their relaxation behavior after the driver is turned off.     

Rotational spectrum of the Ar–dimethyl sulfide complex

The rotational spectra of three isotopomers of the Ar–dimethyl sulfide (DMS) complex – normal, ³⁴S, and ¹³C species – were measured in the frequency region from 3.7 up to 24.1 GHz by Fourier transform microwave spectroscopy. The normal species yielded 43 a-type and 79 c-type transitions. No Ar tunneling splitting was observed, while many transitions were split by the internal rotation of the two methyl tops of the DMS unit. In cases where the K-type splitting was close to that due to methyl internal-rotation, several forbidden transitions were observed that followed b-type selection rules. All of the observed transition frequencies were analyzed simultaneously using a phenomenological Hamiltonian also used in previously published work describing the Ar–dimethyl ether (DME) and Ne–DME complexes. The rotational and centrifugal distortion constants and the potential barrier height to methyl-top internal rotation, V₃, were determined. The rotational constants were consistent with an Ar–DMS center of mass (cm) distance of 3.796 (3) Å and a S–cm–Ar angle of 104.8 (2)°. The V₃ potential barrier obtained, 736.17 (32) cm⁻¹, was 97.8% of the DMS monomer barrier. By assuming a Lennard–Jones-type potential, the dissociation energy was estimated to be 2.4 kJ mol⁻¹, which was close to the value for Ar–DME, 2.5 kJ mol⁻¹.     

Why does shear banding behave like first-order phase transitions? Derivation of a potential from a mechanical constitutive model

Numerous numerical and experimental evidence suggest that shear banding behavior looks like first-order phase transitions. In this paper, we demonstrate that this correspondence is actually established in the so-called non-local diffusive Johnson-Segalman model (the DJS model), a typical mechanical constitutive model that has been widely used for describing shear banding phenomena. In the neighborhood of the critical point, we apply the reduction procedure based on the center manifold theory to the governing equations of the DJS model. As a result, we obtain a time evolution equation of the flow field that is equivalent to the time-dependent Ginzburg-Landau (TDGL) equations for modeling thermodynamic first-order phase transitions. This result, for the first time, provides a mathematical proof that there is an analogy between the mechanical instability and thermodynamic phase transition at least in the vicinity of the critical point of the shear banding of DJS model. Within this framework, we can clearly distinguish the metastable branch in the stress-strain rate curve around the shear banding region from the globally stable branch. A simple extension of this analysis to a class of more general constitutive models is also discussed. Numerical simulations for the original DJS model and the reduced TDGL equation is performed to confirm the range of validity of our reduction theory.     

A continuous-time dynamic pricing model knowing the competitor’s pricing strategy

In this paper we consider a dynamic pricing model for a firm knowing that a competitor adopts a static pricing strategy. We establish a continuous time model to analyze the effect of dynamic pricing on the improvement in expected revenue in the duopoly. We assume that customers arrive to purchase tickets in accordance with a geometric Brownian motion. We derive an explicit closed-form expression for an optimal pricing policy to maximize the expected revenue. It is shown that when the competitor adopts a static pricing policy, dynamic pricing is not always effective in terms of maximizing expected revenue compared to a fixed pricing strategy. Moreover, we show that the size of the reduction in the expected revenue depends on the competitor’s pricing strategy. Numerical results are presented to illustrate the dynamic pricing policy.     

Asymptotic enumeration of sparse 2‐connected graphs

We determine an asymptotic formula for the number of labelled 2‐connected (simple) graphs on n vertices and m edges, provided that m ‐ n →∞ and m = O(nlog n) as n →∞. This is the entire range of m not covered by previous results. The proof involves determining properties of the core and kernel of random graphs with minimum degree at least 2. The case of 2‐edge‐connectedness is treated similarly. We also obtain formulae for the number of 2‐connected graphs with given degree sequence for most (“typical”) sequences. Our main result solves a problem of Wright from 1983. © 2012 Wiley Periodicals, Inc. Random Struct. Alg., 2013