Determination of polydimethylsiloxane-air partition coefficients using headspace sorptive extraction

Polydimethylsiloxane-air partition coefficients (K(PDMS-A)) were determined using direct headspace analysis and headspace sorptive extraction (HSSE) with polydimethylsiloxane-coated (PDMS) stir bars. The partition coefficients were investigated for three compounds, p-dichlorobenzene (PDCB), naphthalene and camphor, all of which sublimate at room temperature and find use as moth repellents. In order to determine the K(PDMS-A) values of these compounds, the air concentration and the concentration present on PDMS, both at equilibrium, were measured. The results indicate that PDMS-air partition coefficients are proportional to octanol-air partition coefficients. Thus, the latter could be used to estimate the extraction efficiency of PDMS for these compounds in air. Alternatively, octanol-air partition coefficients for organic compounds could be estimated from the PDMS-air partition coefficient values. As expected, the PDMS-air (or octanol-air) partition coefficient increased with decreasing temperature. Importantly, the partition coefficients determined at saturated vapor pressures were lower than the values determined at lower analyte concentrations, with the differences being greater for compounds with larger partition coefficients. Consequently, caution should be exercised when applying K(PDMS-A) values determined at high analyte concentrations to measurements at lower concentrations, especially when the partition coefficients are large.     

Development and validation of a qualitative screening method for the detection of exogenous anabolic steroids in urine by liquid chromatography-tandem mass spectrometry

A screening method for the urinary detection of 34 exogenous anabolic steroids has been developed. The method involves an enzymatic hydrolysis, liquid-liquid extraction and detection by liquid chromatography-tandem mass spectrometry. The use of some adducts such as [M+NH₄]⁺, [M+CH₃COO]⁻ and [M+H+MeOH]⁺ was necessary in order to detect some analytes at the required level (lower than 10 ng/ml). Two transitions were selected for each analyte. Different concentration factors have been studied in order to increase the sensitivity. A concentration factor of 50 was selected for the screening method although the high ion suppression observed under these conditions can hamper its application as a quantitative method. The method was validated and limits of detection were obtained by spiking ten different blank urine samples at five different concentration levels. Up to 29 analytes were detected in all spiked urines at the required level. Limits of detection between 1 and 10 ng/ml were obtained for most analytes which fulfil current requirements. The applicability of the method was shown by analysing positive samples.     

Synthetic,Optical and Theoretical Study of Alternating Ethylenedioxythiophene–Pyridine Oligomers: Evolution from Planar Conjugated to Helicoidal Structure towards a Chiral Configuration

A series of alternating 3,4‐ethylenedioxythiophene–alkynylpyridine oligomers (DA)_n with increased solubility are synthesized and their photophysical properties and nonlinear optical properties are investigated. Their quadratic polarizabilities are determined from hyper‐Rayleigh scattering experiments to obtain information on their conformations in solution. These chromophores, based on the alternation of electron‐rich (D) and electron‐deficient (A) moieties, exhibit optical properties that arise from the combination of dipolar and helicoidal features in the (DA)_n homologue series where n=1–4. The transition from dipolar conjugated planar structures (n=1, 2) to helicoidal structures (n=3, 4) is clearly evidenced by results from symmetry‐sensitive second‐order nonlinear optical experiments. This suggests an approach towards highly efficient chiral chromophores for second‐order nonlinear optics. Interestingly, this structural evolution also has significant impact on the photophysical properties: both absorption and fluorescence emission show bathochromic and hyperchromic shifts with increasing number of repeating units in the dipolar planar derivatives (n=1–2) but show saturation effects in the helicoidal structures (n=2–4). In addition, the helicoidal structures show sizeable two‐photon absorption at 700–750 nm (40–100 GM) for compounds lacking either electron‐donating or electron‐withdrawing substituents.     

Efficient approach for the detection and identification of new androgenic metabolites by applying SRM GC‐CI‐MS/MS: a methandienone case study

Identification of anabolic androgenic steroids (AAS) is a vital issue in doping control and toxicology, and searching for metabolites with longer detection times remains an important task. Recently, a gas chromatography chemical ionization triple quadrupole mass spectrometry (GC‐CI‐MS/MS) method was introduced, and CI, in comparison with electron ionization (EI), proved to be capable of increasing the sensitivity significantly. In addition, correlations between AAS structure and fragmentation behavior could be revealed. This enables the search for previously unknown but expected metabolites by selection of their predicted transitions. The combination of both factors allows the setup of an efficient approach to search for new metabolites. The approach uses selected reaction monitoring which is inherently more sensitive than full scan or precursor ion scan. Additionally, structural information obtained from the structure specific CI fragmentation pattern facilitates metabolite identification. The procedure was demonstrated by a methandienone case study. Its metabolites have been studied extensively in the past, and this allowed an adequate evaluation of the efficiency of the approach. Thirty three metabolites were detected, including all relevant previously discovered metabolites. In our study, the previously reported long‐term metabolite (18‐nor‐17β‐hydroxymethyl,17α‐methyl‐androst‐1,4,13‐trien‐3‐one) could be detected up to 26 days by using GC‐CI‐MS/MS. The study proves the validity of the approach to search for metabolites of new synthetic AAS and new long‐term metabolites of less studied AAS and illustrates the increase in sensitivity by using CI. Copyright © 2016 John Wiley & Sons, Ltd.     

Degradation of a polyester‐urethane coating: Physical properties

In this article we studied the evolution of thermomechanical properties of a polyester‐urethane coating during degradation under different degradation conditions, i.e., aerobic and anaerobic conditions with and without dry/wet cycling during degradation. Dynamic mechanical and thermal analyses show that under aerobic conditions the coatings become stiffer and more brittle in the glassy state. This stiffening is probably due to the increase in the amount of hydrogen bonding and the formation of oxidized groups which increase the polarity of the material and enhance the interactions of the polymer segments. However, oxidation reactions result in a considerable decrease in cross‐link density and stiffness in the rubbery state. Both changes, in the glassy and rubbery states, give rise to development of internal stresses. These stresses increase as the degradation process proceeds. Nevertheless, for samples exposed to anaerobic conditions, the stiffness remains constant in the glassy state and the cross‐link density slightly increases as a result of degradation. This reconfirms the dominance of the effect of oxidation reactions on the mechanical failure of the coatings. Oxygen permeation measurements show a more‐or‐less time‐independent diffusion coefficient and a gradual decrease in solubility of oxygen as a function of exposure time. This results in a slight decrease in oxygen permeation (mainly in the early stage of the degradation) as degradation proceeds. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 659–671     

Development of a qualitative liquid chromatography/tandem mass spectrometric method for the detection of narcotics in urine relevant to doping analysis

A new screening procedure for 18 narcotics in urine for anti-doping purposes has been developed using liquid chromatography/triple quadrupole mass spectrometry (LC/MS). Electrospray ionization (ESI) was used as interface. Infusion experiments were performed for all substances to investigate their mass spectrometric behaviour in terms of selecting product specific ions. These product ions were then used to develop a tandem mass spectrometric method using selected reaction monitoring (SRM). For the LC/MS analysis, chromatography was performed on an octadecylsilane column. The total run time of the chromatographic method was 5.5 min. For the sample preparation prior to LC/MS analysis, the urine samples were liquid-liquid extracted at pH 9.5 after overnight enzymatic hydrolysis. Two extraction solvents were evaluated: dichloromethane/methanol 9/1 (v/v), which is currently used for the extraction of narcotics, and diethyl ether, used for the extraction of steroids. With diethyl ether the detection limits for all compounds ranged between 0.5 and 20 ng/mL and with the mixture containing dichloromethane the detection limits ranged between 0.5 and 10 ng/mL. Taking into account the minimum required performance limits of the World Anti-Doping Agency of 200 ng/mL for narcotics, diethyl ether can also be considered as extraction solvent for narcotics. Finally, the described method was applied to the analysis of urine samples previously found to contain narcotics by our routine gas chromatography/mass spectrometry (GC/MS) method.     

Impact of Collection Volume and DNA Extraction Method on the Detection of Biomarkers and HPV DNA in First-Void Urine

The potential of first-void (FV) urine as a non-invasive liquid biopsy for detection of human papillomavirus (HPV) DNA and other biomarkers has been increasingly recognized over the past decade. In this study, we investigated whether the volume of this initial urine stream has an impact on the analytical performance of biomarkers. In parallel, we evaluated different DNA extraction protocols and introduced an internal control in the urine preservative. Twenty-five women, diagnosed with high-risk HPV, provided three home-collected FV urine samples using three FV urine collection devices (Colli-Pee) with collector tubes that differ in volume (4, 10, 20 mL). Each collector tube was prefilled with Urine Conservation Medium spiked with phocine herpesvirus 1 (PhHV-1) DNA as internal control. Five different DNA extraction protocols were compared, followed by PCR for GAPDH and PhHV-1 (qPCR), HPV DNA, and HBB (HPV-Risk Assay), and ACTB (methylation-specific qPCR). Results showed limited effects of collection volume on human and HPV DNA endpoints. In contrast, significant variations in yield for human endpoints were observed for different DNA extraction methods (p < 0.05). Additionally, the potential of PhHV-1 as internal control to monitor FV urine collection, storage, and processing was demonstrated.     

Visualizing defects and pore connectivity within metal–organic frameworks by X-ray transmission tomography

Metal–Organic Frameworks (MOFs) have the potential to change the landscape of molecular separations in chemical processes owing to their ability of selectively binding molecules. Their molecular sorting properties generally rely on the micro- and meso-pore structure, as well as on the presence of coordinatively unsaturated sites that interact with the different chemical species present in the feed. In this work, we show a first-of-its-kind tomographic imaging of the crystal morphology of a metal–organic framework by means of transmission X-ray microscopy (TXM), including a detailed data reconstruction and processing approach. Corroboration with Focused Ion Beam-Scanning Electron Microscopy (FIB-SEM) images shows the potential of this strategy for further (non-destructively) assessing the inner architecture of MOF crystals. By doing this, we have unraveled the presence of large voids in the internal structure of a MIL-47(V) crystal, which are typically thought of as rather homogeneous lattices. This challenges the established opinion that hydrothermal syntheses yield relatively defect-free material and sheds further light on the internal morphology of crystals.

TXM-tomography unraveled large macropore defects within a MIL-47(V) MOF crystal. These pores do not seem to be well connected and they show a preferential orientation.     

Outstanding Quadratic to Septic Optical Nonlinearity at Dipolar Alkynylmetal-Porphyrin Hybrids

Porphyrins are important macrocycles with applications in several areas including therapy, catalysis, and sensing. Strong nonlinear optical (NLO) responses are the key to fully exploiting the potential of these biocompatible molecules. We herein report that certain metal-alkynyl donor/nitro acceptor-functionalized porphyrins are attractive candidates for NLO applications. We show that specific examples exhibit record quadratic optical nonlinearity, exceptional two-photon absorption, and outstanding three-photon absorption, and we report the first porphyrins that exhibit four-photon absorption. The two-, three-, and four-photon absorption maxima are found at the corresponding multiples of linear absorption bands that time-dependent density functional theory assigns as admixtures of porphyrin-localized π*←π and donor-porphyrin to porphyrin-acceptor charge-transfer transitions.     

Translation Generalized Quadrangles In Even Characteristic

In this paper, we first introduce new objects called “translation generalized ovals” and “translation generalized ovoids”, and make a thorough study of these objects. We then obtain numerous new characterizations of the of Tits and the classical generalized quadrangle in even characteristic, including the complete classification of 2-transitive generalized ovals for the even case. Next, we prove a new strong characterization theorem for the of Tits. As a corollary, we obtain a purely geometric proof of a theorem of Johnson on semifield flocks. * The second author is a Postdoctoral Fellow of the Fund for Scientific Research—Flanders (Belgium).