Zum Dissoziationsverhalten dimerer Metallhalogenide und zur Bildung von MnAl2Cl8

Dissoziation Behaviour of Dimerie Metal Halides and the Formation of MnAl₂Cl₈ The thermal dissoziation was measured of the gaseous dimeric metal halides Al₂Cl₆, Ga₂Cl₆, In₂Cl₆, and Mn₂I₄ and the formation of the gaseous chloride complex MnAl₂Cl₈ by MnCl_2,f and Al₂Cl_6,g in a membrane manometer. The enthalpy and the entropy of these reactions were derived.     

Continuous Selective Heating of the Dispersion Medium in a Unit Constituted by Heater and Mass-Exchange Apparatus

A new method for heat exchange between dispersed flows and a unit for continuous selective heating, comprising a heater and a mass-exchange apparatus, was proposed. A mathematical model of the unit was developed for the cases of direct-flow and counterflow heaters. Analytical solutions to the model equations were obtained. The parameters affecting the result of continuous selective heating of the dispersion medium in the unit were determined.     

Iodine(V) reagents in organic synthesis. Part 3. New routes to heterocyclic compounds via o-iodoxybenzoic acid-mediated cyclizations: generality, scope, and mechanism

The discovery and development of the o-iodoxybenzoic acid (IBX) reaction with certain unsaturated N-aryl amides (anilides) to form heterocycles are described. The application of the method to the synthesis of delta-lactams, cyclic urethanes, hydroxy amines, and amino sugars among other important building blocks and intermediates is detailed. In addition to the generality and scope of this cyclization reaction, this article describes a number of mechanistic investigations suggesting a single electron transfer from the anilide functionality to IBX and implicating a radical-based mechanism for the reaction.     

Determination of low levels of an antioxidant in polyolefins by large-volume injection temperature-programmed packed capillary liquid chromatography

Sub-ambient column temperatures, promoting strong interactions between the analyte and the stationary phase material, were utilized to focus large volumes of the polyolefin antioxidant Irganox 1076 [benzenepropanoic acid, 3.5-bis(1,1-dimethylethyl)-4-hydroxy-, octadecyl ester] on the column inlet, using pure acetonitrile as sample solvent and mobile phase. Injection volumes up to 100 microl were successfully employed on a 50 cm x 320 microm I.D. capillary column packed with 5 microm Kromasil 100 ODS particles. Irganox 1076 was eluted after completed injection by temperature programming, using a temperature program from 7 to 90 degrees C, in 3 degrees C min(-1). UV detection, using a low-dispersion "U"-shaped flowcell, was performed at 280 nm. The method was applied for the determination of Irganox 1076 that was extracted from low-density polyethylene (0.6 ppm, w/w). Both Soxhlet and microwave-aided solvent extractions were performed, using chloroform and acetonitrile as solvents, respectively. The microwave-aided extraction with acetonitrile was found to give approximately the same yield as the standard Soxhlet reference method. Consequently, small volumes of acetonitrile could be used both as extraction solvent, sample solvent and mobile phase, simplifying the analysis process. The mass limit of detection of the method was found to be 3.3 ng, corresponding to a concentration limit of detection of 33 ng ml(-1), utilizing an injection volume of 100 microl. The within and between day precision of retention times displayed relative standard deviations below 1.2%.     

Rheology of PVC plastisol--VI: criteria for yielding and fracture of an immobilized layer

PVC plastisol exhibits pseudo-plastic flow in steady shear; that is, viscosity decreases with the increasing shear rate. At higher shear rates viscosity reaches a minimum and then increases, i.e., dilatant behavior. Previously, pseudo-plastic behavior was explained by a mechanism in which the suspended particles partition into an immobilized layer and a mobile phase. The development of the immobilized layer with the increase in shear rate was shown to quantitatively account for pseudo-plastic behavior. In higher shear rates dilatation of the immobilized layer was shown to be the cause of dilatacy. At even higher shear rates the immobilized layer fractures. In this paper the viscosity minimum was interpreted as the yielding of the immobilized layer. Subsequently, data in the literature were analyzed to find criteria for the yielding and fracture of the immobilized layer. Yielding was found to obey Coulomb's criterion, from which the coefficient of friction and the cohesive strength of the immobilized layer were evaluated. These properties were controlled by the nature of particle assembly in the immobilized layer and the plasticizer type had only a minor effect. The value of the coefficient of friction was on the lower side and within the range of values found in the literature for other materials. There were two modes of fracture of the immobilized layer, one with low strength, low strain to break, and the other with high strength, high strain to break. The former is analogous to the brittle fracture of solids and the latter ductile failure. The strength of brittle fracture was somewhat higher than cohesive strength, which was evaluated from yielding data. This is akin to Griffith's criterion for brittle fracture of a solid. Ductile failure occurred when the shear stress exceeded normal stress.     

Thermal decompositions of sulphosalicylates of MG(II), CA(II) and ZN(II)

The thermal decompositions of the sulphosalicylates of Mg(II), Ca(II) and Zn(II) have been investigated by means of TG and DTA. The preparation and analysis of these compounds are included. The possible decomposition reactions in the various stages and the final decomposition products are discussed.     

Stereochemical effects in the electron impact mass spectra of cis–trans isomeric 1,2,3,5-tetramethylcyclohexanes and some trimethylcyclohexanes

The mass spectra of 10 isomeric trimethylcyclohexanes and six cis–trans isomeric 1,2,3,5-tetramethylcyclohexanes are discussed. The thermochemically stable isomers show a higher abundance of the [M? CH₃]⁺ ions and a lower abundance of the [M? C₂H₅]⁺ ions than the strained isomers. The log of the intensity ratio for loss of methyl and ethyl from the molecular ions correlates well with the strain energies and with the mean number of gauche arrangements of the stereoisomers.     

Phosphides with Zr2Fe12P7-type structure

Twenty-six ternary phosphides Ln₂T₁₂P₇ (Ln = lanthanoid, T = Fe, Co, Ni) were prepared for the first time by reaction of the elemental components in liquid tin or by reaction of the components in evacuated silica tubes. The analysis of their powder patterns indicates their isotypism with Zr₂Fe₁₂P₇. Their lattice constants are reported. Gd₂Ni₁₂As₇ also crystallizes with that structure.     

Itinerant electron ferromagnetism in Sr2+-, Ca2+-, and Ba2+-doped rare-earth orthocobaltites (Ln3+1−xM2+xCoO3)

Electronic and magnetic properties of Ln_1?xSr_xCoO₃ (Ln = Pr, Nd, Sm, Eu, and Gd) systems show that above a critical value of x, the d electrons become itinerant while the materials become ferromagnetic at low temperatures. The ferromagnetic component increases with increase in x and decrease in temperature. The Curie temperature increases with x and decreases with decrease in the size of the rare-earth ion. Incorporation of Ba²⁺ in LaCoO₃ favors itinerant electron ferromagnetism relative to Sr²⁺ while Ca²⁺ is less favorable than Sr²⁺.     

Calculations of electric dipole hyperpolarizability of polyatomic molecules

Coupled Hartree-Fock perturbation theory is employed to compute electric dipole hyperpolarizabilities of water, ammonia and methane with three different GTO basis sets. The results were extremely sensitive to the form of zero-order HF wave-functions. In some cases large discrepancies between computed and experimental values suggest that the latter ones must be reviewed. A comparison with other computations is also made.