Superhalogen properties of CumCln clusters: theory and experiment

Using a combination of density functional theory and anion photoelectron spectroscopy experiment, we have studied the structure and electronic properties of CuCl(n)(-) (n = 1-5) and Cu(2)Cl(n)(-) (n = 2-5) clusters. Prominent peaks in the mass spectrum of these clusters occurring at n = 2, 3, and 4 in CuCl(n)(-) and at n = 3, 4, and 5 in Cu(2)Cl(n)(-) are shown to be associated with the large electron affinities of their neutral clusters that far exceed the value of Cl. While CuCl(n) (n ≥ 2) clusters are conventional superhalogens with a metal atom at the core surrounded by halogen atoms, Cu(2)Cl(n) (n ≥ 3) clusters are also superhalogens but with (CuCl)(2) forming the core. The good agreement between our calculated and measured electron affinities and vertical detachment energies confirm not only the calculated geometries of these superhalogens but also our interpretation of their electronic structure and relative stability.     

Ultraviolet Photodissociation of Carboxylate-Derivatized Peptides in a Quadrupole Ion Trap

The fragmentation patterns obtained by ultraviolet photodissociation (UVPD) and collision-induced dissociation (CID) in a quadrupole ion trap mass spectrometer were compared for peptides modified at their C-termini and at acidic amino acids. Attachment of Alexa Fluor 350 or 7-amino-4-methyl-coumarin chromophores at the C-terminal and acidic residues enhances the UV absorptivity of the peptides and all fragment ions that retain the chromophore, such as the y ions that contain the chromophore-modified C-terminus. Whereas CID results in the formation of the typical array of mainly y-type and a/b-type fragment ions, UVPD produces predominantly a/b-type ions with greatly reduced abundances of y ions. Immonium ions, mostly ones from aromatic or basic amino acids, are also observed in the low m/z range upon UVPD. UVPD of peptides containing two chromophore moieties (with one at the C-terminus and another at an acidic residue) results in even more efficient photodissociation at the expense of the annihilation of almost all diagnostic b and y ions containing the chromophore.     

Massively parallel concentration device for multiplexed immunoassays

A massively parallel nanofluidic concentration device array for multiplexed and high-throughput biomolecule detection is demonstrated. By optimizing the microchannel/nanojunction design and channel conductivity, an array of up to 128 nanofluidic concentration devices were fabricated. Operation of the entire array requires only one inlet and one outlet reservoir, with the application of a single operational voltage bias across them. Concentration efficiencies of the devices were found to be uniform within the array, within 5% error. Alternatively, concentration speed in each channel can be individually tuned by controlling the length of the inlet microchannel and thus controlling the flow rate based on change of the tangential electric field. This allows immuno-binding reactions at different concentration ranges to be performed in parallel. Using multiplexed, successive-concentration enhanced detection in the device, we have shown that the dynamic range and reliability of the immunoassay can be significantly increased.     

Reducing the cost, smell, and toxicity of the Barton reductive decarboxylation: chloroform as the hydrogen atom source

When used as solvent, chloroform was found to act as a hydrogen atom donor in Barton reductive decarboxylation reactions. Chloroform offers a substantial practical advantage over pre-existing hydrogen atom donors.     

Emulsion electrospinning of a collagen-like protein/PLGA fibrous scaffold: empirical modeling and preliminary release assessment of encapsulated protein

The effectiveness of a multifunctional scaffold produced by the electrospinning of emulsions composed of organic PLGA and aqueous collagen-like protein (denoted as Fol-8Col) solutions is demonstrated. The resultant Fol-8Col/PLGA fibrous scaffolds with homogeneous morphology have mean fiber diameters from 600 to 2,000 nm. A uniform distribution of encapsulated Fol-8Col in the fibers is observed by fluorescence microscopy. TEM is used to clarify the representative core/sheath structure of emulsion electrospun Fol-8Col/PLGA fibers. Preliminary release assessment of encapsulated Fol-8Col shows results of sustained release for more than one month from the Fol-8Col/PLGA fibrous mats. The cytocompatibility of fibroblast cell line L929 with the fibrous composite seems promosing.     

Semitransitive subsemigroups of the singular part of the finite symmetric inverse semigroup

We prove that the minimal cardinality of a semitransitive subsemigroup in the singular part $\mathcal{I}_{n}\setminus \mathcal{S}_{n}$ of the symmetric inverse semigroup $\mathcal{I}_{n}$ is 2n?p+1, where p is the greatest proper divisor of n, and classify all semitransitive subsemigroups of this minimal cardinality.     

Precise control and consecutive modulation of spin transition temperature using chemical migration in porous coordination polymers

Precise control of spin transition temperature (T(c)) is one of the most important challenges in molecular magnetism. A Hofmann-type porous coordination polymer {Fe(pz)[Pt(II)(CN)(4)]} (1; pz = pyrazine) exhibited cooperative spin transition near room temperature (T(c)(up) = 304 K and T(c)(down) = 284 K) and its iodine adduct {Fe(pz)[Pt(II/IV)(CN)(4)(I)]} (1-I), prepared by oxidative addition of iodine to the open metal sites of Pt(II), raised the T(c) by 100 K. DSC and microscopic Raman spectra of a solid mixture of 1-I and 1 revealed that iodine migrated from 1-I to 1 through the grain boundary after heating above 398 K. We have succeeded in precisely controlling the iodine content of {Fe(pz)[Pt(CN)(4)(I)(n)]} (1-In; n = 0.0-1.0), which resulted in consecutive modulation of T(c) in the range 300-400 K while maintaining the hysteresis width. Furthermore, it was demonstrated that iodine migration in the solid mixture was triggered by the spin transition of 1-I. The magnetically bistable porous framework decorating guest interactive open-metal-site in the pore surface makes it possible to modulate T(c) ad arbitrium through unique postsynthetic method using iodine migration.     

Design and fabrication of a superhydrophobic glass surface with micro-network of nanopillars

The wetting property of a superhydrophobic glass surface with a micro-network of nanopillars fabricated from colloidal lithography and plasma etching is investigated in this paper. The micro-network distribution of nanospheres can be modulated by diluting the nanosphere concentration and controlling the spin rate. The micro-network of nanospheres spun on the glass surface serves as a mask for nanopillars during the plasma etching process. After the fabrication, the nano-structured surface is treated with fluoroalkylsilane self-assembled monolayers to obtain superhydrophobicity. Among several spin rates, the minimum colloidal network area density from a 100 nm polystyrene nanosphere solution diluted to 0.026% was found at a spin rate of 4000 rpm. The sample with the lowest network area density shows a good quality of superhydrophobicity, having the highest water contact angle and the lowest sliding angle among samples with other network area densities. In particular, samples with a micro-network of pillars also showed mechanical robustness against finger rubbing. To assess the superhydrophobic behavior in-depth, a size-dependent contact angle equation is proposed for use with a high contact angle (>135°) and with a Bo (Bond number) ? 1. Furmidge's sliding angle equation is also modified; it is derived considering a static contact angle to simplify the prediction of the sliding angle. The contact and sliding angle measurements from samples with a micro-network of nanopillars show good agreement with the proposed equations.     

Evaluation of 1‐arylpiperazine derivative of hydroxybenzamides as 5‐HT1A and 5‐HT7 serotonin receptor ligands: An experimental and molecular modeling approach

The synthesis and evaluation as 5‐HT_1A and 5‐HT₇ serotonin receptor ligands of the two sets of O‐substituted hydroxybenzamides, structurally related to 2‐{3‐[4‐(2‐methoxyphenyl)piperazin‐1‐yl]propoxy}benzamide ( 1 ), (K_i 5‐HT_1A = 21 nM, 5‐HT₇ = 234 nM) are reported. To affect the affinity for 5‐HT_1A and 5‐HT₇ receptors, an amide moiety ( 2 , 3 , 4 , 5 , 6 ) and a hydrocarbon chain length ( 7 , 8 , 9 , 10 ) were modified. The serotonergic activity of compounds 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 was generally higher in the case of 5‐HT_1A receptors compared with 5‐HT₇ ones; the most active 5‐HT_1A ligands being meta‐isomer 2 (K_i = 7 nM) and both analogs of 1 with the longest spacer, i.e., penta‐ and hexa‐methylene derivatives 9 and 10 (K_i = 4 and 3 nM, respectively). The observed biological properties of compounds 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 were elucidated using molecular modeling procedures. J. Heterocyclic Chem., (2010).