高含量钒的钼钒磷杂多化合物的合成和性质研究

本工作改进了文献[4]报导的几种原料同时混合、加热煮沸合成的方法采用分步加入原料,控制反应温度、多次重结晶的方法合成了6、7、8个钒原子取代的钼钒磷杂多酸铵;并以铵盐为原料,用离子交换、冷冻分离和真空抽吸相结合的提纯方法制备了未见文献报导的相应的固体杂多酸;H₅[PMo₅V₇O_37.5]·xH₂O,H₆[PMo₄V₈O_37.5]·xH₂O。通过元素组成分析确定了它们的组成。这些杂多酸在水溶液、非水溶液中的电位滴定表明,杂多阴离子在分解前没有发生自电离、水解等情况,它们在水溶液中是稳定的。酸的碱度分别为5、5、6。通过纸上色谱实验,讨论了杂多酸的分解过程。由热重分析和溶解性实验得到它们的分解温度,本文还讨论了这些化合物的红外、紫外光谱,x光粉末衍射及极谱性质。光谱结果表明,它们可能具有Keggin结构,由导数脉冲极谱得到它们的峰电位。     

Crystal Structure and Characterization of a Large Polyoxotungstate (NH4)21{La(H2O)5[Ni(H2O)]2As4W40O140}·53H2O

The heteropolytungstate (NH4)₂₁{La(H₂O)₅[Ni(H₂O)]₂As₄W₄₀O₁₄₀}·53H₂O is obtained by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀]· 60H₂O with NiCl₂·6H₂O, La(NO₃)₃·6H₂O and NH₄Cl at pH‐4.5. The structure and chemical composition are determined by X‐ray diffraction analysis and elemental analysis. The crystal data and main structure refinement are a = 1.9551(3) nm, b = 2.4156(4) nm, c= 3.7068(6) nm, β = 91.505(3)°, V = 17.500 (5) nm³, monoclinic crystal system with space group P2₁/n, Z = 4, R₁ = 0.0573, wR₂ = 0.0717 [I >2<s?(I)], R₁, = 0.2463 and wR₂ = 0.1199 (all data). [La(H₂O)₅] {Ni(H₂O)}₂AS₄W₄₀O₁₄₀ has C₂, symmetry. IR spectra of the ligand [NaAs₄W₄₀O₁₄₀]^27‐ and its three complexes were discussed.     

有机/无机异质结薄膜发光二极管

聚合物发光二极管（LED）自从Burrou吵es等于1990年首次报导PPV的电致发光［‘］以来，由于聚合物半导体具有热和化学性能的稳定，克眼了有机小分子材料容易晶化的优点，在平板显示领域必将占有一席之地，从而吸引了许多科学家投身到这一领域来．众所周知，要想实现LED的实用化     

N-(邻-氯苯基)氨基乙酸铜(Ⅱ)和N-(邻-甲基苯基)氨基乙酸铜(Ⅱ)的合成、晶体结构和电子结构

合成了N-(邻氯苯基)氨基乙酸铜(Ⅱ)和N-(邻甲基苯基)氨基乙酸铜(Ⅱ)的单晶体,测定了它们的晶体结构,并对其电子结构进行EHMO计算。N-(邻氯苯基)氨基乙酸铜(Ⅱ)属单斜晶系,空间群P2₁/a.a=8.786(4),b=7.777(2),c=11.956(2)Å,β=96.01(3)°,V=812.4ų,Z=2,D_c=1.77g·cm^-3;N-(邻甲基苯基)氨基乙酸铜(Ⅱ)属单斜晶系,空间群P2₁/a,a=8.925(6),b=7.973(8),c=11.856(9)Åβ=96.23(6)°,V=838.6Å,Z=2,D_c=1.55g·cm^-3。两配合物互为异质同晶。配合物中,铜原子为分子的对称中心,并与两个配位体的两个羧基氧和两个氨基氮原子形成四方形配位结构,平均Cu-O键长为1.902Å,Cu-N为2.050Å。量子化学计算表明,在配位键的形成中,铜原子的d轨道的作用均不大,但配体中苯环上取代基的性质对Cu-N键强度有一定影响。     

Pt对Mo基催化剂还原-硫化过程的影响

采用脉冲硫化、连续硫化、程序升温还原、程序升温及程序降温电导及X射线衍射等方法研究了贵金属Pt对MoO3催化剂还原-流化过程的影响及Pt对MOS2配位不饱和活性中心形成的影响．结果表明，Pt担载或在MoO3上可以促进MoO3的还原-硫化，使MoO3的还原-硫化温度大大降低Pt担载在MoSw上可促进MoS2的部分还原形成配位不饱和的钼中心     

联二脲氧化生成偶氮二甲酰胺反应的钒催化机理

在钒催伦剂存在下，用氯酸钠氧化联二脲制成偶氮二甲酰胺，从钒催化剂的单晶培养和结构解析入手，通过反应动力学研究，用ＥＳＲ检测反应过程中四价钒的生成，用分光光度法（分别以钛钛试剂和硫氰酸铵为显色剂）确定了反应过程中三价钒的生成和变化情况，从而提出了可能的催化机理，还利用量化计算从热力学角度证实了所提出的包括四价钒铬离子歧化过程在内的钒催化机理的合理性。     

Catalytic Para‐Xylene Maximization. V. Toluene Methylation with Methanol and Disproportionation of Toluene Using Pt/ZSM‐5 and Pt/Mordenite Catalysts

Toluene was methylated with methanol and disproportionated using catalysts containing different Pt contents (0.2, 0.4 and 0.6%) supported on H‐ZSM‐5 or H‐mordenite (H‐M) zeolites in a fixed‐bed flow‐reactor operated atmospherically at temperatures of 300–500 °C in a flow of hydrogen. Platinum dispersion in the zeolite supports and acid sites strength distribution were evaluated using hydrogen chemisorption (1:1 stoichiometry) and ammonia temperature programmed desorption (TPD) in a differential scanning calorimeter (DSC). Toluene methylation was much faster on all catalysts than toluene disproportionation (DISP). Both reactions were more accelerated using H‐ZSM‐5 containing catalysts than H‐M containing catalysts. The yield of xylenes, and in particular para‐xylene, was significantly influenced by the yield of trimethylbenzenes (TMBs) in product. The selectivities for para‐, ortho‐ and meta‐xylenes production were found largely dependent on the Pt content in the catalysts, particularly when supported on H‐ZSM5‐zeolite. However, using Pt/H‐M catalysts, these selectivities were not strictly controlled by Pt content in the catalysts.     

WOx/TiO2光催化剂的可见光催化活性机理探讨

采用磁控溅射技术在用浸渍提拉法制得的TiO2薄膜上，溅射氧化钨层,通过气相反应中光催化降解二甲苯的实验表明，WOx/TiO2薄膜具有可见光活性.通过UV-Vis吸收光谱、X射线光电子能谱（XPS）等方法对其可见光活性的机理进行探索.UV-Vis吸收光谱表明WOx,TiO2对可见光响应的范围有一定的扩展,吸收强度增加.XPS表明WOx/TiO2薄膜表面形成了明显的W杂质能级和Ti缺陷能级,这是WOx/TiO2在可见光范围有一吸收的主要原因,也是光催化剂具有可见光活性的必要条件之一，同时杂质能级的存在使半导体费米能级上移,载流子增加,光催化效率提高.     

The preparation of nano‐scope chitosan‐oligomer copper complexes and their interaction with DNA

Water‐soluble low molecular weight chitosan of nanometer level and its copper complexes were prepared, and characterized by IR spectra, elemental analysis and gel permeation chromatography (GPC). The modes and mechanism of these copper complexes interaction with DNA were studied by a fluorescent probe method and electrophoresis analysis. It is suggested that there are electrostatic and intercalation modes of copper complexes interacting with DNA. At first, the cationic complex electrostaticly binds to the negatively charged phosphate backbone of DNA, and then a portion of the complex intercalates between the base pairs on the DNA duplex strand. Copyright © 2005 John Wiley & Sons, Ltd.