Reduction of chromium in ethylene polymerisation using bis(imido)chromium(VI) catalyst precursors

Hybrid density functional calculations on [Cr(NR)2C3H7(C2H4)]+ (R = H, tBu) have revealed a facile reductive elimination reaction involving beta-hydrogen transfer from the alkyl chain, suggesting that the active species in ethylene polymerisation with bis(imido)chromium(VI) precursors contains a reduced chromium atom.     

Thioacetylacetone: structural and vibrational assignments.

Thioacetylacetone and its variously deuterated isotopomers have been investigated using electronic and vibrational spectroscopy combined with quantum chemical calculations. Thioacetylacetone is known for its photochromic properties, but the structures of the initial and final forms have been the subject of a long debate. Analysis of the IR spectra recorded in low-temperature argon and xenon matrices, room-temperature solutions, and in the gas phase has allowed us to establish the nature of the photochromic species and of its precursor. Similar to the case of another beta-thioxoketone, monothiodibenzoylmethane, the photo-product has been assigned to the nonchelated SH exo-rotamer of the (Z)-enethiol tautomeric form, whereas the dominant ground-state species corresponds to the chelated (Z)-enol tautomeric form. Detailed vibrational assignments have been proposed for both forms based on quantum chemical calculations and polarization experiments. In the case of the chelated (Z)-enol species prevailing in the ground state, a second-order perturbative anharmonic analysis at the B3LYP/cc-pVTZ level indicated strong anharmonic effects associated with the intramolecular hydrogen bond, leading to a shift of more than 600 cm-1 of the wavenumber of the OH-stretching vibration. A small fraction of the SH endo-rotameric chelated (Z)-enethiol form was also detected under unperturbed conditions. The (Z)-enethiol form can be converted into the (Z)-enol form by irradiation at 290 nm.     

Feasibility of a liquid-phase microextraction sample clean-up and liquid chromatographic/mass spectrometric screening method for selected anabolic steroid glucuronides in biological samples

Anabolic androgenic steroids (AAS) are metabolized extensively in the human body, resulting mainly in the formation of glucuronide conjugates. Current detection methods for AAS are based on gas chromatographic/mass spectrometric (GC/MS) analysis of the hydrolyzed steroid aglycones. These analyses require laborious sample preparation steps and are therefore time consuming. Our interest was to develop a rapid and straightforward method for intact steroid glucuronides in biological samples, using liquid-phase microextraction (LPME) sample clean-up and concentration method combined with liquid chromatographic/tandem mass spectrometric (LC/MS/MS) analysis. The applicability of LPME was optimized for 13 steroid glucuronides, and compared with conventional liquid-liquid extraction (LLE) and solid-phase extraction (SPE) procedures. An LC/MS/MS method was developed for the quantitative detection of AAS glucuronides, using a deuterium-labeled steroid glucuronide as the internal standard. LPME, owing to its high specificity, was shown to be better suited than conventional LLE and SPE for the clean-up of urinary AAS glucuronides. The LPME/LC/MS/MS method was fast and reliable, offering acceptable reproducibility and linearity with detection limits in the range 2-20 ng ml(-1) for most of the selected AAS glucuronides. The method was successfully applied to in vitro metabolic studies, and also tested with an authentic forensic urine sample. For a urine matrix the method still has some unsolved problems with specificity, which should be overcome before the method can be reliably used for doping analysis, but still offering additional and complementary data for current GC/MS analyses.     

高岭石吸附乙烯和苯的Delft分子力学研究

运用Ｄｅｌｆｔ分子力学（ＤＭＭ）程序及其粘土和共轭烯烃力场，计算研究了高岭石对乙烯和苯的吸附作用，探讨了吸附对粘土晶体和有机分子的结构、电荷分布和能量的影响，求得了高岭石吸附乙烯和苯的吸附热等重要物理量．     

Transannular reactions of two parallel 1,3-butadiynes: syntheses,structures, and reactions of 1-azacyclotetradeca-3,5,10,12-tetrayne derivatives

The synthesis of 1-alkyl and 1-aryl-1-azacyclotetradeca-3,5,10,12-tetraynes was achieved in a stepwise approach. The key intermediate was 1,13-dibromotrideca-2,4,9,11-tetrayne (18). Reaction with methyl- (19 a), ethyl- (19 b), isopropyl- (19 c), n-butyl- (19 d), and tert-butylamine (19 e) as well as aniline (19 f) and p-methoxyaniline (19 g) gave the corresponding 14-membered tetraynes 20 a-20 g. The ring inversion process of 20 b was studied by variable temperature (1)H NMR spectroscopy. From these measurements a value of 10.6 kcal mol(-1) was calculated for DeltaG(not equal). X-ray investigations on single crystals of 20 b, 20 c, and 20 f revealed the axial position for the substituent at each nitrogen atom. For 20 b we encountered the chair conformation, for 20 c both chair and boat conformations, and for 20 f the boat conformation in the solid state. The reaction of 20 c with concentrated HCl in ethanol yielded 2,10-dichloro-6-isopropyl-6-azatricyclo[9.3.0.0(4,8)]tetradeca-1(11),2,4(8),9-tetraene (25 c). Compound 25 c was oxidized by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) to 27 c. The structure of the latter was confirmed by X-ray investigations. The reaction of 20 c in aqueous HCl lead to the formation of 10-chloro-2-isopropyl-1,3,4,6,7,8-hexahydro-2H-benzo[g]isoquinolin-9-one (37 c). The structure of 37 c was verified by X-ray studies on single crystals.     

Shortcut method for evaluation and design of a hybrid process for enantioseparations

Hybrid processes for enantioseparations have a considerable potential for reducing investment and operational costs. An example is the combination of simulated moving bed (SMB) chromatography and selective crystallisation. However, the design of integrated processes is a difficult task. A shortcut method is presented that can serve as a tool for design and estimation of the potential of such processes. The approach requires only limited experimental data and thus allows for systematic parameter studies. The method is based on the determination of the purity-performance characteristic of the SMB process and rigorous application of mass balances. The use of relative mass fluxes allows derivation of simple algebraic expressions for essential process parameters. The significant potential of combining SMB and crystallisation is demonstrated for the example of the separation of mandelic acid enantiomers.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-1-(Indanyloxymethyl) and <Emphasis Type="Italic">N</Emphasis>-1-(4-Hydroxybut-2-enyloxymethyl) Analogues of the HIV Drugs Emivirine and GCA-186

Summary. A series of Emivirine and GCA-186 analogues substituted at N-1 with indan-1-yloxymethyl (6a–6c) and indan-2-yloxymethyl (6d–6f) were synthesized by reaction of the corresponding bis(indanyloxy)methans with uracils having 5-ethyl or 5-isopropyl and 6-benzyl or 6-(3,5-dimethylbenzyl) substituents. A route to the corresponding N-1 substituted 4-hydroxybut-2-enyloxymethyl analogue was also devised. All newly synthesized compounds showed potent activity against wild-type HIV-1, the most active compound being 5-ethyl-1-(indan-1-yloxymethyl)-6-(3,5-dimethylbenzyl)uracil (6b), which was 50-fold more active than Emivirine.Present address: Chemistry Department, Faculty of Science, Tanta University, Tanta, EgyptA research center funded by The Danish National Research Foundation for studies on nucleic acid chemical biology     

The application of "click chemistry" for the decoration of 2(1H)-pyrazinone scaffold: generation of templates

The "click chemistry" approach has been explored on the 2-(1H)-pyrazinone scaffold for the generation of pharmacologically interesting heterocyclic moieties. Huisgen 1,3-dipolar cycloaddition has been evaluated as the key step for the construction of the 1,2,3-triazole ring at the C-3 position of 2-(1H)-pyrazinones. Two different pathways have been successfully evaluated: (1) via C-C or C-O linkage of the acetylenic part to the C-3 position of the 2-(1H)-pyrazinone scaffold or (2) via azide introduction in the C-3 position. The subsequent application of "click chemistry" resulted in the formation of hitherto unknown skeletons. Microwave irradiation has successfully been applied in different steps of the sequence.