Immobilized Polysaccharide-Based Stationary Phases for Enantioseparation in Normal Versus Reversed Phase HPLC

A set of 31 structurally different chiral pharmaceutical compounds was used as model analytes for investigation of the enantioselective potential of two immobilized polysaccharide-based chiral stationary phases under normal and reversed phase separation conditions. These chiral stationary phases differed in the polymeric backbone, amylose or cellulose, but possessed the same derivatization functionality. The results showed that the tris(3,5-dimethylphenylcarbamate) of amylose and cellulose have very broad, and often complementary, enantiorecognition abilities. In general, normal phase separation mode seemed to be more advantageous for separation of the majority of studied pharmaceuticals no matter if amylose- or cellulose-based columns were used. However, in certain cases the reversed phase separation system yielded better results. The combination of these two immobilized chiral stationary phases offers a powerful tool for enantioseparation of different types of pharmaceuticals in the normal and/or reversed phase mode.

     

Visible-light photocurrent response of TiO2-polyheptazine hybrids: evidence for interfacial charge-transfer absorption

We investigated photoelectrodes based on TiO(2)-polyheptazine hybrid materials. Since both TiO(2) and polyheptazine are extremely chemically stable, these materials are highly promising candidates for fabrication of photoanodes for water photooxidation. The properties of the hybrids were experimentally determined by a careful analysis of optical absorption spectra, luminescence properties and photoelectrochemical measurements, and corroborated by quantum chemical calculations. We provide for the first time clear experimental evidence for the formation of an interfacial charge-transfer complex between polyheptazine (donor) and TiO(2) (acceptor), which is responsible for a significant red shift of absorption and photocurrent response of the hybrid as compared to both of the single components. The direct optical charge transfer from the HOMO of polyheptazine to the conduction band edge of TiO(2) gives rise to an absorption band centered at 2.3 eV (540 nm). The estimated potential of photogenerated holes (+1.7 V vs. NHE, pH 7) allows for photooxidation of water (+0.82 V vs. NHE, pH 7) as evidenced by visible light-driven (λ > 420 nm) evolution of dioxygen on hybrid electrodes modified with IrO(2) nanoparticles as a co-catalyst. The quantum-chemical simulations demonstrate that the TiO(2)-polyheptazine interface is a complex and flexible system energetically favorable for proton-transfer processes required for water oxidation. Apart from water splitting, this type of hybrid materials may also find further applications in a broader research area of solar energy conversion and photo-responsive devices.     

Raman spectroscopic evidence for bent metallocene fragments [M(Cp)2]2+

Raman spectroscopy was used as a very simple and convenient tool for the detection of bent metallocene fragments [M(Cp)₂]²⁺ (Cp = η⁵‐cyclopentadienyl ring; M = early transition metal) both in solid state and in solution. The rules were formulated and tested on the group of titanium complexes containing one or two η⁵‐bonded cyclopentadienyl rings, as well as on a series of model α‐amino acid complexes of antitumour active titanocene and vanadocene dichlorides. Copyright © 2005 John Wiley & Sons, Ltd.     

Ionic complexes of 1,1′‐dimethyltitanocene(IV) dichloride with simple α‐amino acids: synthesis,structural characterisation and investigation on hydrolytic stability in aqueous solution

Five cationic complexes of the general formula [Cp′₂Ti(A)₂]²⁺ [Cl^?]₂ [Cp′ = η⁵‐(CH₃)C₅H₄ and A = glycine, 1 ; 2‐methylalanine, 2 ; N‐methylglycine, 3 ; L ‐alanine, 4 ; and D ‐alanine 5 ] were prepared by the reaction of Cp′₂TiCl₂ and the appropriate α‐amino acid in 1:2 molar ratio from methanol–water solution in high yield. Air‐stable crystalline solids, highly soluble in water, were characterized by means of elemental analysis, IR, Raman, ¹H, ¹³C and ¹⁴N NMR spectroscopy. The structure of compound 3 was determined by single crystal X‐ray crystallography: orthorhombic Pbca No. 61, a = 9.5310(3), b = 18.2980(5), c = 26.6350(5) Å, V = 4654 ų, Z = 8. Hydrolytic stability of all compounds in D₂O was investigated using ¹H NMR spectroscopy within the pD interval of 2.9–6.5. All compounds slowly decomposed during 24 h at pD = 2.94, forming a mixture of hydrolytic products [Cp′₂Ti(A)(D₂O)]²⁺, [Cp′₂Ti(D₂O)₂]²⁺ and respective α‐amino acids. By elevating pD to 4.0 and up to 6.5, a yellowish precipitate was formed, which indicates decomposition of the complexes. These compounds were characterized using elemental analyses, IR and Raman spectroscopy and attributed to oligomeric and/or polymeric structures described empirically by the formula Ti(Cp′)_xO_y(OH)_z (x = 0.65; y = 0.3, z = 1.9). Copyright © 2005 John Wiley & Sons, Ltd.     

Crystallographic report: The [bis(η5‐methylcyclopentadienyl)titanium(IV)‐bis(N‐methylglycine)] dichloride

The crystal network of [Cp′₂Ti(N?CH₃? Gly)₂]²⁺[Cl^?]₂ (Cp′ = (CH₃)C₅H₄) complex, which crystallizes as a solvate with CH₃OH, is built up with discrete cationic units connected through intermolecular H· · ·Cl bonds. The α‐amino acid ligands are attached through an intramolecular H· · ·O bond within one cationic unit. Copyright © 2004 John Wiley & Sons, Ltd.     

Enantiomeric purity control of <Emphasis Type="Italic">R</Emphasis>-cinacalcet in pharmaceutical product by capillary electrophoresis

The capillary zone electrophoresis method was developed for the chiral separation of R,S-cinacalcet. Cyclodextrins with different substituents were tested in both acidic and alkaline background electrolytes. The non-ionic cyclodextrin, 2-hydroxypropyl-γ-cyclodextrin, was selected as the best chiral selector. The separation was performed using a positive voltage in a phosphate buffer at pH 2.5. The analytes studied were separated within 12 min. The proposed method was applied to the analysis of tablets containing R-cinalcalcet as the active substance. The enantiopurity of R-cinacalcet in the tablets studied was confirmed. Subsequently, the analysis of tablets spiked with S-cinacalcet (chiral impurity) was also performed. The method here presented makes possible the determination of 0.1 % of S-cinacalcet in tablets. The analytical characteristics of the method, such as linearity, recovery and RSD values of the peak area and the migration time, were evaluated. The inter-day RSD values of the peak area and the migration time were lower than 3.71 % and 1.3 %, respectively.     

Influence of substituents on selectivity and efficiency of chiral separations of anions containing single nido-7,8-dicarbaundecaborane cluster with alpha-cyclodextrin

In background electrolyte (BGE) with the optimal methanol concentration of 30% (v/v), the ion with -NCS group bonded to a cluster boron atom exhibits the strongest interaction with alpha-cyclodextrin and the highest separation selectivity. Interaction of ions with alkyl or thioalkyl group weakens with the increasing substituent size. The ion with phenyl group exhibits the weakest interaction. Bonding of a group to boron atom weakens the ion interaction with alpha-cyclodextrin. Second substituent further weakens the interaction with alpha-cyclodextrin. Separation efficiency is lower at the presence of alpha-cyclodextrin than at its absence. This separation efficiency loss, amounts up to 90%.     

Interactions of the “piano‐stool” [ruthenium(II)(η6‐arene)(quinolone)Cl]+ complexes with water; DFT computational study

Full optimizations of stationary points along the reaction coordinate for the hydration of several quinolone Ru(II) half‐sandwich complexes were performed in water environment using the B3PW91/6‐31+G(d)/PCM/UAKS method. The role of diffuse functions (especially on oxygen) was found crucial for correct geometries along the reaction coordinate. Single‐point (SP) calculations were performed at the B3LYP/6‐311++G(2df,2pd)/DPCM/saled‐UAKS level. In the first part, two possible reaction mechanisms—associative and dissociative were compared. It was found that the dissociative mechanism of the hydration process is kinetically slightly preferred. Another important conclusion concerns the reaction channels. It was found that substitution of chloride ligand (abbreviated in the text as dechlorination reaction) represents energetically and kinetically the most feasible pathway. In the second part the same hydration reaction was explored for reactivity comparison of the Ru(II)‐complexes with several derivatives of nalidixic acid: cinoxacin, ofloxacin, and (thio)nalidixic acid. The hydration process is about four orders of magnitude faster in a basic solution compared to neutral/acidic environment with cinoxacin and nalidixic acid as the most reactive complexes in the former and latter environments, respectively. The explored hydration reaction is in all cases endergonic; nevertheless the endergonicity is substantially lower (by ～6 kcal/mol) in basic environment. © 2016 Wiley Periodicals, Inc.     

The study of properties of HPLC determination of polycyclic aromatic nitrogen heterocycles

The study of the separation of polycyclic aromatic nitrogen heterocycles (PANHs) by reverse-phase liquid chromatography with an octadecyl stationary phase is presented. The retention behaviour of a mixture of PANHs was studied under different chromatographic conditions. A mixture of phosphate buffer/acetonitrile was used as mobile phase in isocratic and gradient modes. The effect of different pH mobile phase in the range from 2.5 to 6.5 has been investigated to describe retention changes of PANHs as a function of their acid/base properties. Different concentrations of phosphate buffer as a component of the mobile phase were used to study the effect of ionic strength. Very good RP-HPLC separation of 24 PANHs and 16 EPA polycyclic aromatic hydrocarbons (PAHs) was obtained without a pre-separation step in a test mixture and the extract of a real soil sample. Limits of detection of PANHs obtained by two detection techniques, ultraviolet-diode array detection (UV-DAD) and fluorescence detector (FD), are compared. The proposed method is tested with a real soil sample.