Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

Charge transfer across a polymer gel/liquid interface: determination of ionophores

An electrochemical method for the determination of the ionophores monensin and lasalocid was developed, based on the polarization of an agar gel/nitrobenzene electrolyte interface. The measured current corresponding to the facilitated ion transfer across this interface is directly proportional to the concentration of an ionophore dissolved in the organic phase. Using cyclic voltammetry in a three-electrode system the detection limit for both ionophores is about 3 × 10^?5 M.     

Über Reaktionen von Nitrosophenolen, 4. Mitt.: Reaktion von Nitrosonaphtholen mit Naphtholen

Zusammenfassung Die Reaktion von 1-Nitroso-2-naphthol mit 1-und 2-Naphthol sowie die Reaktion von 2-Nitroso-1-naphthol mit 2-Naphthol in Äthanol und in Äther bei Anwesenheit von HNO₃ gibt 5H-Dibenzo[a,j]phenoxazon-(5) (I), 5H-Dibenzo[a,j]phenoxazon-(5)-14-oxid (II), 5H-Dibenzo[a,h]phenoxazon-(5) (III) sowie 5H-Dibenzo[a,h]phenoxazon-(5)-14-oxid (IV). Es wurde ein Reaktionsmechanismus vorgeschlagen und die Konstitution der hergestellten Verbindungen spektrophotometrisch und potentiometrisch bestimmt.

---

The reaction of 1-nitroso-2-naphthol with 2-and 2-naphthol and the reaction of 2-nitroso-1-naphthol with 2-naphthol in ethanol or ether in the presence of nitric acid have been studied. The main reaction products isolated were the dibenzophenoxazones I–IV. The reaction mechanism for their formation is proposed.

---

---

Mit 4 Abbildungen     

Flow-injection determination of creatine in animal tissues

After deproteination of samples with trichloroacetic acid, creatine is determined by reaction with 1-naphthol and biacetyl, based on a stopped-flow method. The calibration graph is linear over the range 0–250 mg l^?1, and recoveries from muscle samples are quantitative.     

Possible Mechanisms of Intercalation

Recent knowledge of the kinetics and intercalation mechanisms are summarized and accompanied by examples of intercalation reactions of water and ethanol into anhydrous vanadyl phosphate and redox intercalation of alkali metal cations into vanadyl phosphate dihydrate. Three possible mechanisms of intercalation are presented which are based on: (i) a concept of exfoliation of layers; (ii) the formation of stages and randomly stacked layers; (iii) co-existence of intercalated and non-intercalated parts of crystals of the host separated by an advancing phase boundary. The corresponding kinetic curves are ascribed to mechanisms (ii) and (iii).     

Crystal structures and magnetic properties of two low-dimensional materials constructed from [Mn(III)(salen)H2O]+ and [M(CN)8](3-/4-) (M = Mo or W) precursors

The syntheses, X-ray structures, and magnetic behaviors of two new cyano-bridged assemblies, the molecular [Mn(III)(salen)H2O]3[W(V)(CN)8].H2O (1) and one-dimensional [Mn(salen)(H2O)2]2[[Mn(salen)(H2O)][Mn(salen)]2[Mo(CN)(8)]].0.5ClO4.0.5OH.4.5H2O (2), are presented. Compound 1 crystallizes in the monoclinic system, has space group P2(1)/c, and has unit cell constants a = 13.7210(2) A, b = 20.6840(4) A, c = 20.6370(2) A, and Z = 4. Compound 2 crystallizes in the triclinic system, has space group P, and has unit cell dimensions a = 18.428(4) A, b = 18.521(3) A, c = 18.567(4) A, and Z = 2. The structure of 1 consists of the asymmetric V-shaped Mn-NC-W-NC-Mn-O(phenolate)-Mn molecules, where W(V) coordinates with [Mn(salen)H2O] and singly phenolate-bridged [Mn(salen)H2O]2 moieties through the neighboring cyano bridges. The [W(V)(CN)8]3- ion displays distorted square-antiprism geometry. The structure of 2 consists of the cyano-bridged [Mn3(III)Mo(IV)]n- repeating units linked by double phenolate bridges into one-dimensional zigzag chains. The Mn(III) centers are bound to Mo(IV) of square-antiprism geometry through the neighboring cyano bridges. The magnetic studies of 1 reveal the antiferromagnetic intramolecular interactions through the CN and phenolate bridges and the relatively weak intermolecular interactions. Compound 1 becomes antiferromagnetically ordered below TN = 4.6 K. The presence of the magnetic anisotropy is documented with the MH measurements carried out for both polycrystalline and single-crystal samples. At T = 1.9 K, the spin-flop transition is observed in the field of 18 kOe applied parallel to the bc plane, which is the easy plane of magnetization. Field dependence of magnetization of 1 shows field-induced metamagnetic behavior from the antiferromagnetic ground state of ST = 3/2 to the state of ST = 5/2. The magnetic properties of 2 indicate a weak antiferromagnetic interaction between Mn(III) centers in double-phenolate-bridged [Mn(III)(salen)]2 dinuclear subunits and a very weak ferromagnetic interaction between them through the diamagnetic [Mo(IV)(CN)8]4- spacer.     

Synthesis and properties of water-soluble gold colloids covalently derivatized with neutral polymer monolayers

Citrate-capped gold nanoparticles as well as planar gold surfaces can be efficiently grafted with a covalently attached polymer monolayer a few nanometers thick, by simple contact of the metal surface with dilute aqueous solutions of hydrophilic polymers that are end-capped with disulfide moieties, as shown by UV/vis absorption, dynamic light scattering, and surface plasmon resonance studies. The hydrophilic polymer-coated gold colloids can be freeze-dried and stored as powders that can be subsequently dissolved to yield stable aqueous dispersions, even at very large concentrations. They allow for applying filtrations, gel permeation chromatography, or centrifugation. They do not suffer from undesirable nonspecific adsorption of proteins while allowing the diffusion of small species within the hydrogel surface coating. In addition, specific properties of the original hydrophilic polymers are retained such as a lower critical solution temperature. The latter feature could be useful to enhance optical responses of functionalized gold surfaces toward interaction with various substrates.     

Strukturanalyse organischer Sulfide mit Hilfe der Gras-Chromatographie

Zusammenfassung Eine Methode der Identifizierung von Alkyl- und Arylgruppen organischer Sulfide wurde ausgearbeitet, die die Spaltung dieser Stoffe mit Raney-Nickel zur gaschromatographischen Bestimmung der dabei entstandenen Kohlenwasserstoffe ausnützt.

---

Summary A method was developed for identifying alkyl- and aryl groups of organic sulfides. The method employs the cleavage of these materials with Raney nickel for the gas chromatographic determination of the resulting hydrocarbons.

---

Résumé On a mis au point une méthode d'identification des groupes alkylés et arylés des sulfures organiques exploitant la dissociation de ceux-ci par le nickel Raney pour le dosage par chromatographic en phase gazeuse des carbures d'hydrogène qui se forment.

---

---

Die Autoren danken den Kollegen Dr.M. Veea, Ing.J. Petránek und Ing.J. Gaspari für die Überlassung von Proben organischer Sulfide.     

An application of neural networks in chemistry. Prediction of13C NMR chemical shifts

Basic definitions of neural networks are given in terms of oriented graphs. Partial derivatives of an objective function with respect to the weight and threshold coefficients are derived. These derivatives are very important for the adaptation process, carried out by a version of the gradient method of We neural network considered. The stability of the adapted neural network toward small changes — perturbation — of input activities is described by sensitivities. The theory is illustrated by application of simple neural networks that reflect the topology of molecules to the classification of¹³C NMR chemical shifts of secondary carbons in acyclic alkanes.     

Combination of flow injection analysis and voltammetry

The flow injection analyzer for students, teaching and research (FIAstar) is used in conjunction with a new micropool mercury flow-through electrode, to explore the possibilities offered by using d.c. polarography, rapid scan and amperometric titrations on a dispersed sample zone in motion. The work outlines the principles of the use of a scanning detector for investigation of the concentration gradients and chemical reactions taking place during the dispersion of sample solution within a carrier stream. The data, which are collected in real time, are displayed in three-dimensional diagrams.