Perpendicular magnetic anisotropy in single-crystal Co<Subscript>50</Subscript>Pt<Subscript>50</Subscript>/MgO(100) films

The crystal structure and hysteretic magnetic properties of equiatomic single-crystal CoPt films applied on MgO substrates by magnetron sputtering, as well as modification of these properties by thermal annealing, are studied. Heat-treated films of thickness in the range 2<d≤16 nm exhibit perpendicular magnetic anisotropy. A correlation between the crystalline anisotropy constant of the CoPt films and the order parameter of the LI₀ superstructure in these alloys is found. The effect of a single-crystalline MgO substrate on the structure and magnetic properties of equiatomic CoPt films is revealed.     

Longitudinal DC electric discharge in a supersonic air flow

A longitudinal dc electric discharge in a submerged high-pressure supersonic air jet is described. Photographs of the discharge are provided. The experimental voltage across the discharge gap and the discharge current are given for two resistances of the resistor that limits the discharge current over a certain range of the discharge channel length along the air flow. The current-voltage discharge characteristic is provided at a constant discharge length. The main discharge characteristics are obtained from a comparison of the experimental and theoretical results calculated on the basis of the simplest model.     

Numerical simulation of the translational nonequilibrium zone behind a shock-wave front

The translational nonequilibrium zone in a shock wave is considered for a gas consisting of light particles and a small addition of heavy particles. The gas is taken to be two-dimensional, and long-range forces are assumed to be absent. In the framework of this approximation, a program for molecular dynamics simulation of the gas is developed. It is applied to calculate a particle distribution function in the shock wave, to analyze the time evolution of the distribution function, and to study its dependence on the gas composition.     

Effect of γ radiation from <Superscript>60</Superscript>Co on the formation of metal contacts to GaAs (Al<Subscript>x</Subscript>Ga<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>As) structures

The properties of nonrectifying AuGe/GaAs (Al_0.4Ga_0.6As) contacts exposed to heat treatment, ⁶⁰Co γ radiation, and γ radiation combined with the application of an electrical bias are studied. A correlation between the type of interfacial interaction in the contacts and their resistance is found. Results obtained are explained in terms of a diffusion model with a movable boundary of the metal layer.     

Structure and properties of TiC-TiNi composites alloyed with iron

The structure, composition, and mechanical properties of iron-alloyed TiC-TiNi composite materials are studied. When the titanium carbide framework is sintered with iron and then impregnated with titanium nickelide, iron atoms are found to diffuse into the matrix and form the B2 structure that is inhomogeneous (gradient) in chemical composition and properties and exhibits various temperatures of martensitic transformation. The latter fact shows up in the broadening of the martensitic transformation hysteresis and its shift toward low temperatures with increasing iron content. At room temperature, the strength properties of gradient-matrix TiC-TiNi composites are shown to increase with iron concentration.     

Modulation of the phase difference between polarization modes in single-mode fibers

Mechanisms of polarization modulation in a single-mode fiber that modulate the phase difference between polarization modes without affecting their amplitudes are considered. A coefficient that characterizes the efficiency of cylindrical piezoceramic modulators and is independent of their resonant properties is introduced. Analytical expressions for this coefficient for different modulation mechanisms are derived. The lateral pressure on the fiber is shown to provide the highest efficiency. For isotropic fibers, a modulator with a squeezing covering, which increases significantly its efficiency, is studied. For anisotropic fibers, the most appropriate way of phase difference modulation is longitudinal extension, in which case the birefringence axes do not have to be matched. In most cases, the measured and predicted efficiencies are in good correspondence.     

Stimulated raman scattering in fiber-optic communication lines

Stimulated Raman scattering (SRS) in a long-distance fiber-optic communication line with wavelength-division multiplexing (WDM) is studied theoretically at a high power of the signal transmitted. A new criterion for determining the SRS threshold is used to calculate the critical input power versus the number of optical channels and frequency separation between them. The theoretical model is verified experimentally. SRS interaction between two channels in a communication line with an SRS amplifier for which the optical waveguide of the line serves as a nonlinear medium is measured.     

On the Efficiency of Nonchain Electric-Discharge HF (DF) Lasers

Russian Physics Journal -