Characterization and Oxidation of Magnetron Sputtered Fe-Al Intermetallic Alloys

Fe-Al intermetallic alloys have been considered as protective materials against corrosion. We have studied the properties of such intermetallic coatings Fe _x Al_1?x (x ≤ 0.5) on the aluminum-rich side and their oxidation behaviour. The samples were prepared using rf-magnetron sputtering. The composition and layer thickness were determined by Rutherford Backscattering Spectrometry (RBS) and high-resolution scanning electron microscopy (HRSEM). Conversion Electron Mössbauer Spectroscopy (CEMS) and X-Ray Diffraction (XRD) were applied for phase analysis. We report here on the oxidation of such coatings.     

The dimethyldioxirane-mediated oxidation of phenylethyne

The product pattern found for the dimethyldioxirane-mediated oxidation of phenylethyne strongly depends on the reaction conditions. Dimethyldioxirane generated in situ from caroate (HSO(5)(-)) and acetone in acetonitrile-water furnishes phenylacetic acid as the main product. With solutions of dimethyldioxirane in acetone, mandelic acid and phenylacetic acid are mainly formed. The relative abundances of the two acids depend on the residual water present in the dimethyldioxirane-acetone solution. Application of thoroughly dried solutions of the reagent effects increased formation of mandelic acid. When phenylethyne is oxidized by dimethyldioxirane transferred into tetrachloromethane, to minimize traces of water even further, oligomeric mandelic acid is obtained. The results are rationalized by the initial formation of phenyloxirene, which is known to equilibrate with phenylformylcarbene and benzoylcarbene. Subsequent Wolff rearrangement produces intermediate phenylketene, which can be trapped by water as phenylacetic acid or suffer from further oxidation to the alpha-lactone of mandelic acid. The alpha-lactone can either react with water to yield mandelic acid or, under anhydrous conditions, to yield oligomeric mandelic acid. In addition to mandelic acid and phenylacetic acid phenylglyoxylic acid, benzoic acid and benzaldehyde are observed as reaction products. The formation of phenylglyoxylic acid by transfer of two oxygen atoms to the unrearranged carbon skeleton of phenylethyne followed by oxygen insertion into the aldehydic C-H bond of the intermediately formed phenylglyoxal is discussed. In a second pathway this acid is formed by partial oxidation of mandelic acid. Benzaldehyde and benzoic acid are explained as products of the oxidative degradation of the alpha-lactone by dimethyldioxirane. Under in situ conditions benzoic acid is also formed by caroate initiated oxidative decarboxylation of phenylglyoxylic acid and/or intermediate phenylglyoxal.     

Synthetic studies on palytoxin. Stereocontrolled,practical synthesis of the C.101–C.115 segment

A stereocontrolled and practical synthetic route to the acetal $\text{2a}$, a degradation product of palytoxin, in optically active form is described.     

Heterocycles [h]-fused to 4-oxoquinoline-3-carboxylic acid. Part VII: synthesis of some 6-oxoimidazo[4,5-h]quinoline-7-carboxylic acids and esters

Abstract  

A series of ethyl 2-(substituted)-9-cyclopropyl-4-fluoro-6-oxo-1H-imidazo[4,5-h]quinoline-7-carboxylates has been prepared from ethyl 7,8-diamino-1,4-dihydroquinoline-3-carboxylate via thermally induced reactions with model alkanoic acids or via microwave-assisted cyclocondensation with some arene carboxaldehydes. Acid-catalysed hydrolysis of the resulting ester derivatives furnished the corresponding imidazoquinoline-7-carboxylic acids. The structures of these new acid and ester derivatives are based on microanalytical and spectral (IR, MS, and NMR) data.     

New types of asymmetrical bromonium salts [RF(RF′)Br]Y where RF and/or RF′ represent perfluorinated aryl, alkenyl, and alkynyl groups

A series of previously unknown asymmetrical fluorinated bis(aryl)bromonium, alkenyl(aryl)bromonium, and alkynyl(aryl)bromonium salts was prepared by reactions of C₆F₅BrF₂ or 4-CF₃C₆H₄BrF₂ with aryl group transfer reagents Ar′SiF₃ (Ar′ = C₆F₅, 4-FC₆H₄, C₆H₅) or perfluoroorganyl group transfer reagents R_F′BF₂ (R_F = C₆F₅, trans-CF₃CFCF, C₃F₇C≡C) preferentially in weakly coordinating solvents (CCl₃F, CCl₂FCClF₂, CH₂Cl₂, CF₃CH₂CHF₂ (PFP), CF₃CH₂CF₂CH₃ (PFB)). The presence of the base MeCN and the influence of the adducts R_F′BF₂·NCMe (R_F = C₆F₅, CF₃C≡C) on reactions aside to bromonium salt formation are discussed. Reactions of C₆F₅BrF₂ with Alk_F′BF₂ in PFP gave mainly C₆F₅Br and Alk_F′F (Alk_F′ = C₆F₁₃, C₆F₁₃CH₂CH₂), presumably, deriving from the unstable salts [C₆F₅(Alk_F′)Br]Y (Y = [Alk_F′BF₃]⁻). Prototypical reactivities of selected bromonium salts were investigated with the nucleophile I^-and the electrophile H⁺. [4-CF₃C₆H₄(C₆F₅)Br][BF₄] showed the conversion into 4-CF₃C₆H₄Br and C₆F₅I when reacted with [Bu₄N]I in MeCN. Perfluoroalkynylbromonium salts [C_nF_2n+1C≡C(R_F)Br][BF₄] slowly added HF when dissolved in aHF and formed [Z-C_nF_2n+1CFCH(R_F)Br][BF₄].     

Concerning the deprotonation of the trimethylsulfonium ion by the dimethylsulfinyl anion

As shown by deuterium labelling experiments, the deprotonation of the trimethylsulfonium ion (1) by the dimsyl anion (8) is accompanied by extensive hydrogen exchange. This cannot be explained by an acid-base equilibrium between the trimethylsulfonium ion (1) and the dimsyl anion (8) on one side and dimethylsulfonium methylide (2) and DMSO on the other side, because for thermodynamic reasons this process is irreversible due to the limited life-time of 2. Therefore, the isotopic exchange that accompanies the deprotonation is an indicator of a more complex deprotonation process. It is suggested that in a kinetically controlled reaction, a proton of 1 is transferred to the O-atom of 8 rather than to the carbanionic centre. This means that instead of DMSO, its tautomer, hydroxy-methylsulfonium methylide (10), is obtained in the deprotonation process. Similarly, in the acid-base interaction between DMSO and its conjugate base 8, the formation of the DMSO tautomer 10 is kinetically favoured. The intermediate 10 produced in this way transfers a DMSO-derived proton to 1 when it intervenes in the back reaction 10 + 2→8 + 1. An alternative mechanism based on methyl group exchange between 1 and 8 could be excluded by a (13)C-labelling experiment. The hydrogen exchange according to the suggested scenario is taking place in competition with the reaction of dimethylsulfonium methylide (2) with electrophilic substrates. This explains the different degrees of isotopic exchange when compounds of different electrophilicities are used to scavenge 2 from the deprotonation-hydrogen distribution equilibria.     

Energetics of Electron‐Transfer Reactions of Photoinitiated Polymerization: Dye‐Sensitized Fragmentation of N‐Alkoxypyridinium Salts

Electron transfer from excited dyes to N‐alkoxypyridinium salts leads to reductive cleavage of the N−O bond to give an alkoxy radical that can be used to initiate polymerization. Bond‐dissociation energies obtained from calculations based on density‐functional theory are in agreement with predictions from a thermochemical cycle. These data show a difference of ca. 290 – 315 kJ/mol between the BDE of the pyridinium and that of the pyridyl radical and indicate that the fragmentation of the radical is highly exothermic. The energetic requirements for the photochemical electron transfer are discussed in terms of a simplified model that shows that the initiation efficiency of the radical polymerization can be correlated with a single parameter, the reduction potential of the sensitizing dye. Dyes from many classes and with absorption bands spanning the entire visible region were found to be effective in initiating photopolymerization of acrylate monomers in this system. Doubling of the photoresponse can be achieved through coupling of the reductive cleavage of the N‐alkoxypyridinium with an oxidative cleavage of a C−B bond of an alkyltriarylborate, a process that utilizes the chemical potential stored in the oxidized dye following electron transfer to the pyridinium salt.     

Surface vibrational thermodynamics from ab initio calculations for fcc(1 0 0)

We present vibrational dynamics and thermodynamics for the (1 0 0) surfaces of Cu, Ag, Pd, Pt and Au using a real space approach. The force field for these systems is described by density functional theory. The changes in the vibrational dynamics and thermodynamics from those in bulk are confined mostly to the first-layer. A substantial enhancement of the low-frequency end of the acoustic branch was found and is related to a loosening of the bond at the surface. The thermodynamics of the first-layer also show significant differences (higher heat capacity, lower free energy and higher mean vibrational square amplitudes) from what obtains in bulk. Comparing these results with those calculated using embedded-atom method potentials, we discovered that for Ag(1 0 0) and Cu(1 0 0), the two methods yield very similar results while for Pd(1 0 0), Pt(1 0 0) and Au(1 0 0) there are substantial differences.