Assessing weak intramolecular donor-acceptor interactions using 1H-117Sn J-HMQC spectroscopy

It is demonstrated that long-range nJ(1H,117Sn) coupling constants down to 0.3 Hz, can be accurately quantified from non-linear fitting of the sine modulation of the associated 1H-117Sn correlation cross-peak intensities sampled as a function of the heteronuclear antiphase coherence preparation time in the 1H-117Sn J-HMQC pulse sequence. The contribution of additional, undesired modulations is illustrated and assessed using the product operator formalism, and is traced back to contributions that arise from miss-setting of the wandering 180 degrees pulse angle in the constant time period. The power of the method and its use in the characterization of weak intramolecular donor-acceptor interactions are illustrated by the determination of long-range nJ(1H,117Sn) coupling constants of bis[3-(dimethylamino)propyl]tin derivatives, [Me2N(CH2)3]2SnR2 (', R = Me; 3, R = Ph; 4, R = t-Bu). By comparing these with the values found for the corresponding bis(4-methylpentyl)tin derivatives, [Me2CH(CH2)3]2SnR2 (2', R = Me; 3', R = Ph), which lack such interactions, the use of long-range coupling constants to detect intramolecular donor-acceptor interactions is evaluated. It is concluded that nJ(1H,117Sn) couplings up to six bonds through an organic carbon chain can be quantified, whether donor-acceptor interactions are present or not. Furthermore, evidence is presented that, when two scalar coupling pathways co-exist, the pathway involving an intramolecular donor-acceptor interaction can have opposite sign, thus decreasing the overall coupling constant to a value smaller than that actually measured in the absence of a donor-acceptor interaction, where only one coupling pathway is active. There is nevertheless clear numerical value discrimination in the series of compounds investigated between long-range couplings in derivatives without weak intramolecular donor-acceptor interactions and those where such interactions can exist.     

Planar chiral (η6-arene)Cr(CO)3 containing carboxylic acid derivatives: synthesis and use in the preparation of organometallic analogues of the antibiotic platensimycin

With more and more organometallic compounds receiving attention for applications in medicinal organometallic chemistry, the need arises for stereoselective syntheses of more complicated structures containing organometallic moieties, for example as isosteric substitutes for organic drug candidates. Herein, the synthesis and characterization of both diastereomers of a planar chiral (η(6)-arene)Cr(CO)(3) containing carboxylic acid derivative, namely, 3-{η(6)-(1, 2, 3, 4-tetrahydro-1-endo/exo-methyl-2-oxonaphthalen-1-yl)-tricarbonylchromium(0)}propanoic acid (7 and 8) is reported. The molecular structures of both were confirmed by single crystal X-ray diffraction. The degree of diastereoselectivity in Cr(CO)(3) complexation with methyl/tert-butyl-3-(1,2,3,4-tetrahydro-1-methyl-2-oxonaphthalen-1-yl)propanoate (4a/4b) vs. the Michael addition of methyl/tert-butyl acrylate to (η(6)-1-methyl-2-tetralone)Cr(CO)(3) (9) was also examined. In the latter case the alkylation was found to be completely diastereoselective and gave methyl/tert-butyl-3-{η(6)-(1, 2, 3, 4-tetrahydro-1-endo-methyl-2-oxonaphthalen-1-yl)-tricarbonylchromium (0)}propanoate (5a and 5b) in excellent yield. Both the carboxylic acids 7 and 8 were coupled with the aminoresorcyclic acid core to achieve diastereomeric bioorganometallics 15a and 15b based on the naturally occurring antibiotic platensimycin lead structure (1a, see Fig. 1). The newly synthesized bioorganometallics were tested against various Gram-positive and Gram-negative bacterial strains but show no promising antibacterial activity.     

Adsorbents and columns in analytical high-performance liquid chromatography: a perspective with regard to development and understanding

A brief historical survey is presented on the evaluation of silica adsorbents in analytical HPLC. The theory of analytical HPLC is mostly still being based on the height equivalent to a theoretical plate concept and the van Deemter equation that was derived from gas phase adsorption involving a linear adsorption isotherm and fast mass transfer kinetics. One can obviously wonder whether the use of the van Deemter equation is relevant and valid for the evaluation of the performance of HPLC systems, where most often the liquid solutes involve charged molecules in electrolytes and in very many cases the adsorbates are macromolecules having diffusion coefficients of small magnitude. Instead of the van Deemter equation, a multi-scale modelling approach that involves microscopic and macroscopic dynamic non-linear mass-transfer-rate models should be employed. Furthermore, advanced experimental methods for the characterisation of porous media and the distribution of the density of immobilised active sites (e.g., ligands) on surfaces as well as microscopic pore-network modelling and molecular dynamics modelling and simulation methods could be used for the design of novel adsorbents whose porous structures and immobilised active sites would provide effective mass transport and adsorption rates for realising efficient separations as well as high dynamic capacities when larger throughputs are required.     

Layer-by-layer assembly of partially sulfonated isotactic polystyrene with poly(vinylamine)

The stereoregular synthetic polymer isotactic polystyrene bearing partially sulfonated groups (SiPS) was used as a layer-by-layer assembled thin film for the first time. When a low molecular weight compound was employed as the pair for the alternative layer-by-layer (LbL) assembly, the frequency shift was very small using quartz crystal microbalance (QCM) analysis, whereas poly(vinylamine) (PVAm) formed an effective pair for the construction of LbL films with SiPS. When it was neutralized, SiPS was not assembled, probably due to the loss of effective polymer-polymer interactions. The ionic strength conditions revealed a slight difference of the assembly behavior on the isotactic polymer as compared to the atactic one. The assembled LbL film showed the same peaks over the range from 1141 to 1227 cm(-1) and 700 cm(-1) in the FT-IR/ATR spectra as the bulk complex of SiPS/PVAm, and the thickness on one side was calculated at 76 nm by QCM analysis. The surface roughness of the film was also observed by AFM.     

Lactide Polymerisation with Air‐Stable and Highly Active Zinc Complexes with Guanidine–Pyridine Hybrid Ligands

New class of air‐stable catalysts for lactide polymerisation: Guanidine–pyridine hybrid ligands (picture, left) were used to prepare a series of zinc complexes (e.g., depicted cation [ZnL₂(CF₃SO₃)]⁺, where L is the quinoline‐containing ligand with R¹=R²=R³=R⁴=Me), in which the ligand binds through two different N‐donor atoms. The zinc complexes show high activity in ring‐opening polymerisation of d,l ‐lactide (right), giving polylactide with molecular masses up to 176 000 g mol^?1 and in high yield.

     

DMA analysis and wood bonding of PVAc latex reinforced with cellulose nanofibrils

Suspensions of commercial refined beech pulp (RBP) were further processed through mechanical disintegration (MD-RBP), chemical modification (CM-RBP) and through chemical modification followed by mechanical disintegration (CM-MD-RBP). Nanocomposites were prepared by compounding a poly(vinyl acetate) (PVAc) latex adhesive with increasing contents of the different types of nanofibrils, and the resulting nanocomposites were analyzed by dynamic mechanical analysis (DMA). Also, the suitability of using the CM-RBP fibrils to formulate PVAc adhesives for wood bonded assemblies with improved heat resistance was studied. The presence of cellulose nanofibrils had a strong influence on the viscoelastic properties of PVAc latex films. For all nanocomposites, increasing amounts of cellulose nanofibrils (treated or untreated) led to increasing reinforcing effects in the glassy state, but especially in the PVAc and PVOH glass transitions. This reinforcement primarily resulted from interactions between the cellulose fibrils network and the hydrophilic PVOH matrix that led to the complete disappearance of the PVOH glass transition (tan δ peak) for some fibril types and contents. At any given concentration in the PVOH transition, the CM-MD-RBP nanofibrils provided the highest reinforcement, followed by the MD-RBP, CM-RBP and the untreated RBP. Finally, the use of the CM-RBP fibrils to prepare PVAc reinforced adhesives for wood bonding was promising since, even though they generally performed worse in dry and wet conditions, the boards showed superior heat resistance (EN 14257) and passed the test for durability class D1.     

Ring Enlargement of Three-Membered Heterocycles by Treatment with In Situ Formed Tricyanomethane

Although the chemistry of elusive tricyanomethane (cyanoform) has been studied during a period of more than 150 years, this compound has very rarely been utilized in the synthesis or modification of heterocycles. Three-membered heterocycles, such as epoxides, thiirane, aziridines, or 2H-azirines, are now treated with tricyanomethane, which is generated in situ by heating azidomethylidene-malonodinitrile in tetrahydrofuran at 45 °C or by adding sulfuric acid to potassium tricyanomethanide. This leads to ring expansion with formation of 2-(dicyanomethylidene)oxazolidine derivatives or creation of the corresponding thiazolidine, imidazolidine, or imidazoline compounds and opens up a new access to these push–pull-substituted olefinic products. The regio- and stereochemistry of the ring-enlargement processes are discussed, and the proposed reaction mechanisms were confirmed by using ¹⁵N-labeled substrates. It turns out that different mechanisms are operating; however, tricyanomethanide is always acting as a nitrogen-centered nucleophile, which is quite unusual if compared to other reactions of this species.     

N-(4-(di-tert-butyl[F]fluorosilyl)benzyl)-2-hydroxy-N,N-dimethylethylammonium bromide ([F]SiFANBr): A novel lead compound for the development of hydrophilic SiFA-based prosthetic groups for F-labeling

¹⁸F-labeled compounds play a major role in the development of new in vivo imaging agents for Positron Emission Tomography (PET), a non invasive imaging modality depicting the biodistribution of radioactive compounds in humans. Recently we reported a new method for the introduction of fluorine-18 into a range of organic molecules exploiting the very fast ¹⁸F-¹⁹F isotope exchange of fluorosilanes (termed SiFA compounds). Here, we wish to report the labeling of the first charged SiFA molecule N-(4-(di-tert-butylfluorosilyl)benzyl)-2-hydroxy-N,N-dimethylethylammonium bromide (SiFAN⁺Br⁻) serving as a lead compound in the development of SiFA-based prosthetic groups of reduced lipophilicity for biomolecule labeling. Mild conditions for synthesis of [¹⁸F]SiFAN⁺Br⁻ and an easy purification procedure using simple C-18 solid phase cartridge have been developed yielding the [¹⁸F]SiFAN⁺Br⁻ in radiochemical yields of 34% (non-decay corrected) within 40 min. A series of kinetic experiments were performed that show high isotopic exchange rate constants. Low activation energy (15.7 kcal/mol) and a large preexponential factor (7.9 × 10¹³ M⁻¹ s⁻¹) were calculated for the isotopic exchange reaction from a corresponding Arrhenius plot. For comparison, the ¹⁸F-fluorination of ethyleneglycol-di-p-tosylate via the formation of a carbon-¹⁸F bond showed a 1.3 kcal/mol higher activation energy and a much lower preexponential factor of 2.9 × 10⁹ M⁻¹ s⁻¹. Moderate hydrophilicity (log D = 0.44), stability in aqueous media at pH up to 7.4 and a high specific activity of [¹⁸F]SiFAN⁺Br⁻ (SA = 20.4 GBq/μmol, 0.55 Ci/μmol) make this charged SiFA compound useful for the development of novel SiFA-based ¹⁸F-labeling synthons.     

Development and validation of a rapid LC-ESI-MS/MS method for quantification of fluoxetine and its application to MS binding assays

In the present study, a rapid and sensitive LC-ESI-MS/MS method for quantification of (S)-fluoxetine as a native marker in mass spectrometry (MS) binding assays addressing the human serotonin transporter (hSERT) was developed and validated. The concept of MS binding assays based on mass spectrometric quantification of a nonlabeled marker recently introduced by us represents a promising alternative to conventional radioligand binding without the drawbacks inherently connected with radioisotope labeling. For high-performance liquid chromatography (HPLC), a 20 × 2-mm RP-18 column with a mobile phase composed of acetonitrile and ammonium bicarbonate buffer (5 mmol L⁻¹, pH 9.5) at a ratio of 80:20 (v/v) and a flow rate of 800 μL min⁻¹ in an isocratic mode were used, resulting in a chromatographic cycle time of 60 s. Employing [²H₅]fluoxetine as internal standard enabled ESI-MS/MS quantification of (S)-fluoxetine between 3 nmol L⁻¹ and 50 pmol L⁻¹ (LLOQ) in matrix obtained from binding experiments without the need of any sample preparation. Validation of the method showed that linearity, intra-, and inter-batch accuracy as well as precision meet the requirements of the FDA guidance for bioanalytical method validation. Considering sensitivity and speed, the established method is clearly superior to those published for biological matrices so far. Furthermore, the method was transferred to other RP-18 columns of different lengths and respective validation experiments demonstrated its versatility and chromatographic robustness. Finally, the newly developed method was successfully applied to MS binding assays for hSERT. The affinity determined for (S)-fluoxetine in saturation experiments was in good agreement with literature data obtained in respective radioligand binding assays.