Zur Darstellung von Oxiden cyclischer,sekundärer Arsine

Hydrolysis of 1-chloro-arsolane, C₄H₈AsCl, and 1-chloro-arsenane, C₅H₁₀AsCl, leads to oxides C₈H₁₀As₂O and C₁₀H₂₀As₂O, respectively. On direct alkylation of arsenic trioxide with 1.4-butane- and 1.5-pentane-bis-magnesium bromide these oxides are formed only in trifling amounts. Better results are gained by alkylation of N,N-dimethylaminodichloroarsane into amino-arsolane and amino-arsenane, which are also transformed into these oxides by hydrolysis. By hydrolysis of 1.4-dichloro-diarsenane only a small amount of 1.4-epoxo-arsenane is formed, whereas mainly a dimer of this oxide results. Solvolysis of 2.6-dichloro-diarsa-[3.3.0]-bicyclooctane with water, hydrogen sulphide or methylamine leads to 7-oxa-, 7-thia- and 7-methylaza-2.5-diarsa-noradamantane, respectively.     

Quantitative goldbestimmung in filmmaterialien mittels flammenloser atomabsorption

A graphite rod electrothermal atomizer has been used for the AAS determination of traces of gold in hydrochloric and in hydrobromic acid solutions, and also after extraction into HBr-saturated methyl isobutyl ketone. Photographic film samples were decomposed first by enzyme action then by nitric acid/peroxide oxidation, and the gold was extracted into MIBK. For 10-μl aliquots of solution the 3s limits of detection were 3 × 10^?10g for aqueous solutions, 7 × 10^?10g for MIBK, and 7 × 10^?9 g/cm² for film.     

Die Analytik wasserl?slicher Cellulose?ther

Zusammenfassung Es werden allgemeine und qualitative Merkmale von Natrium-Carboxymethylcellulose, Methylcellulose und Hydroxyäthylcellulose sowie gravimetrische und titrimetrische Bestimmungsmöglichkeiten der wasserlöslichen Celluloseäther insbesondere im Zusammenhang mit dem Substitutionsgrad beschrieben.Verfahren zur Ermittlung der Viscosität von Lösungen, des Polymerisationsgrades und des Gelteilchengehaltes werden besprochen. Abschließend werden charakteristische Beispiele für das analytische Vorgehen bei Substanzgemischen gegeben, die nur einen geringen Anteil Celluloseäther enthalten.

---

Analysis of water-soluble cellulose ethers

General and qualitative characteristics of sodium carboxymethylcellulose, methylcellulose and hydroxyethylcellulose are presented and gravimetric and titrimetric methods for the determination of water-soluble cellulose ethers are described, especially with regard to the degree of substitution. Procedures for the measurement of the viscosity of solutions, of the degree of polymerisation and of the content of gel particles are discussed. Characteristic examples are presented for the treatment of mixtures containing only a small percentage of cellulose ethers.

---

---

Erweiterte und umgearbeitete Fassung eines Vortrages, gehalten am 28. 6. 1971 in Baden-Baden.

---

Frau Dr. G. Bartelmus, Analyt. Laboratorium der Fa. Kalle AG, sprechen wir an dieser Stelle unseren herzlichen Dank für wertvolle Beratung aus.     

Organische Schwefelverbindungen—IV: Elektronenstossinduzierte Redoxreaktion von ortho-Nitrothiobenzoesäure-S-p-tolylester

The electron-impact fragmentation of S-p-tolylester of nitrothiobenzoic acid leads to a previously unknown rearrangement in the case of the ortho compound. This consists of an intra molecular redoxreaction with oxygen transfer from the o-nitro group onto the sulphur of the thiol ester group. The position of the nitro group is not only an essential influence on the fragmentation pattern, but also of dramatic importance in determining the lifetime of the molecular ion.     

Strukturen und Molekül-Eigenschaften ladungsgestörter Moleküle. 52. Mitteilung. 2, 3-Diphenylchinoxalin-Radikalanionen in Lösung und im Kristall

Structures and Molecular Properties of Charge-Pertubed Molecules. 2, 3-Diphenylquinoxaline Radical Anions in Solution and in Crystals The Na⊕ and K⊕ radical-ion salts of 2, 3-diphenylquinoxaline seem to be (according to a structural database search) among the first ones of N-heterocyclic radical anions in crystals. The one-electron reduction in aprotic 1, 2-dimethoxyethan (DME) solution at metal mirrors and the crystallization under Ar have been preceded by cyclovoltammetric (CV) and ESR/ENDOR measurement. The first electron insertion at ?1.63 V proves to be reversible, whereas the irreversible second step, which is accompanied by an overcrossing of the CV line, can be rationalized by an ‘ECE-DISP’ mechanism via a dianion redox disproportionation. The ENDOR spectrum resolves four ¹H couplings and allows to simulate the ESR spectrum including the ¹⁴N hyperfine splittings. Both dark-blue single crystals of the radical ion salts $[2,3{\rm - diphenylquinoxaline}^{{.} \ominus} {\rm Met}^ \oplus ({\rm DME})]^.$ show unexpected similarities for Met⊕ = Na⊕, K⊕ despite the 36-pm difference in their ionic radii. The largest structural changes inflicted by the one-electron reduction of the N-heterocyclic molecule are observed in the vicinity of the N-centers bearing the highest effective nuclear charge. The DME-chelated metal cations coordinate at the N electron pairs and form Met⊕(DME)-bridged polymer chains of the radical anion, which are differently ondulated in the Na⊕ and K⊕ radical anion salts. The take-home lesson suggests that many more N-heterocyclic molecules might be analogously reduced under optimized conditions and isolated as single crystals.     

Carbonyl-yne reactions of 3,3,3-trifluoropyruvates

An efficient synthesis of trifluoromethyl-containing 2,3-allenols via carbonyl-yne reaction of 3,3,3-trifluoropyruvates with acetylenes is described. In the presence of MgBr₂·Et₂O the reaction of methyl trifluoropyruvate with hex-1-yne proceeds diastereoselectively. Trifluoromethyl-substituted 2,3-allenols can be stereoselectively transformed into trifluoromethyl-substituted 2,5-dihydrofurans on treatment with AgNO₃.     

Nordesferriferrithiocin. Comparative Coordination Chemistry of a Prospective Therapeutic Iron Chelating Agent(1)

Nordesferriferrithiocin, NDFFTH(2), is a derivative of the siderophore desferriferrithiocin, DFFTH(2), in which the methyl group is substituted by a hydrogen atom. Both compounds show high oral activity as possible drugs for the treatment of iron overload. While DFFTH(2) is significantly toxic, NDFFTH(2) exhibits a lower toxicity and offers a much better therapeutic window than other orally active iron chelators. In this study, complexes of DFFTH(2) and NDFFTH(2) with various trivalent metals have been synthesized and characterized. Five isomers (the maximum possible) have been observed in the case of [Co(DFFT)(2)](-) in solution, as proved by (1)H-NMR measurements. Although normally labile, complexes of Al(3+) ([Al(DFFT)(2)](-)) have been separated by HPLC. In general, DFFTH(2) forms kinetically inert complexes whereas complexes of NDFFTH(2) tend to isomerize quickly in solution, as indicated by CD spectroscopy of separated HPLC fractions of [Cr(NDFFT)(2)](-). The most stable isomers of the aluminum complexes of both ligands have been characterized by X-ray crystallography; K[Al(DFFT)(2)] crystallizes from methanol/diethyl ether in the orthorhombic space group P2(1)2(1)2 with a = 11.238(3) ?, b = 31.719(11) ?, c = 7.684(2) ?, V = 2739.2(24) ?(3), and Z = 4. This isomer has the mer-(N,O-Lambda)(S,S) configuration, while K[Al(NDFFT)(2)] crystallizes from methanol/diethyl ether in the space group P6(1) (a = 21.269(8) ?, c = 9.643(3) ?, V = 3777.8(42) ?(3), Z = 6) and has the same coordination geometry. The solution thermodynamics of the Al(3+), Ga(3+), and Fe(3+) complexes have been studied by spectrophotometric titration. The stability constants (log K) are 23.6(1), 29.2(3), and 31.04(3), respectively, for the DFFTH(2) complexes and 22.0(1), 27.8(2), and 29.09(3), respectively, for the NDFFTH(2) complexes. Cyclic voltammograms of both iron complexes have been recorded in water at a carbon disk working electrode and in DMF at a graphite working electrode. The reduction waves measured in DMF indicate no reversibility whereas in water a quasi-reversible reduction is observed. The reduction potentials (E(1/2)'s) in water are -166 mV for [Fe(DFFT)(2)](-) and -97 mV for [Fe(NDFFT)(2)](-) versus NHE. These potentials are well in the range for biological reductants, which makes possible an in vivo reduction mechanism for the iron removal from the siderophore.     

Die Kristallstrukturen von KNdTe4, RbPrTe4 und RbNdTe4 — Untersuchungen zur thermischen Stabilität von KNdTe4 sowie Bemerkungen zu einigen anderen Vertretern der Zusammensetzung ALnTe4 (A = K,Rb, Cs und Ln = Seltenerd‐Metall)

Crystal Structures of KNdTe₄, RbPrTe₄, and RbNdTe₄ — Investigations concerning the Thermal Stability of KNdTe₄ as well as some Remarks concerning Additional Representatives of the Composition ALnTe₄ (A = K, Rb, Cs and Ln = Rare Earth Metal) Of the compounds ALnQ₄ (A = Na, K, Rb, Cs; Ln = Lanthanoid; Q = S, Se and Te) the crystal structures of the three new tellurides KNdTe₄, RbPrTe₄ and RbNdTe₄ were determined by X‐ray single‐crystal structure analysis and of the three additional new ones KCeTe₄, KPrTe₄ and CsNdTe₄ by X‐ray powder diffraction experiments. All six new compounds are isotypic with KCeSe₄. Characteristic for the crystal structure of the compounds mentioned above are layers built from (Q₂)^2— dumbbells in form of 4.3².4.3 nets with embedded cations A⁺ and Ln³⁺ between them, which are coordinated eightfold in form of square‐shaped antiprisms by Q ions. The distances Te‐Te within the dumbbells were found to be 277.8(2) pm for all investigated tellurides. By combination of X‐ray diffraction and DTA measurements it was shown that the compound KNdTe₄ is metastable at ambient temperature with a limited existence range between the temperatures 260 and 498 °C.     

Novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues

A series of novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues 1a–e were synthesized in good yields and high optical purities (Schemes 1 and 2). The absolute configurations of these tyrosine analogues were unambiguously determined based on the X-ray structures of the precursor diastereoisomeric peptides of type 4 and 5 . Four of these structures are described (Figs. 1–4), showing β-turn type-I geometries for dipeptides 4a, 5b , and 4c and an extended conformation for peptide 5c (Table 3). The conversion of the free amino acids 1a–c into suitably protected building blocks 11a–d and 15d,e for peptide synthesis is discussed (Schemes 3 and 4).