Measurement of biological parameters during fermentation processes

Efficient fermentation control requires the measurement of biological parameters. Three techniques were tested for monitoring. In the first, the NADH-fluorescence of micro-organisms was measured in batch and in continuous cultures under aerobic and anaerobic conditions, providing information on the metabolic status of the cells. The effects of cell concentration and of different substrates (glucose, ethanol and oxygen) were studied. The second technique is the calorimetric determination of various substrates, such as penicillin or enzymes, by an enzyme/thermistor device. With immobilized penicillin acylase (E.C. 3.5.1.11) or penicillinase (E.C. 3.5.2.6), penicillin was determined selectively in a fermentation broth. The thermistor was also used to measure penicillin acylase activity. The third technique is laser flow cytometry. A commercial double-beam flow cytometry system was used to determine cell size, light scattering and the protein, DNA and RNA contents of single cells. Flow cytometry allows rapid and sensitive control of fermentation processes with genetically modified E. coli 5K (pHM12) cells. The results of monitoring the cell size, light scattering, and protein and DNA contents of different micro-organisms during fermentation are outlined.     

Nordesferriferrithiocin. Comparative Coordination Chemistry of a Prospective Therapeutic Iron Chelating Agent(1)

Nordesferriferrithiocin, NDFFTH(2), is a derivative of the siderophore desferriferrithiocin, DFFTH(2), in which the methyl group is substituted by a hydrogen atom. Both compounds show high oral activity as possible drugs for the treatment of iron overload. While DFFTH(2) is significantly toxic, NDFFTH(2) exhibits a lower toxicity and offers a much better therapeutic window than other orally active iron chelators. In this study, complexes of DFFTH(2) and NDFFTH(2) with various trivalent metals have been synthesized and characterized. Five isomers (the maximum possible) have been observed in the case of [Co(DFFT)(2)](-) in solution, as proved by (1)H-NMR measurements. Although normally labile, complexes of Al(3+) ([Al(DFFT)(2)](-)) have been separated by HPLC. In general, DFFTH(2) forms kinetically inert complexes whereas complexes of NDFFTH(2) tend to isomerize quickly in solution, as indicated by CD spectroscopy of separated HPLC fractions of [Cr(NDFFT)(2)](-). The most stable isomers of the aluminum complexes of both ligands have been characterized by X-ray crystallography; K[Al(DFFT)(2)] crystallizes from methanol/diethyl ether in the orthorhombic space group P2(1)2(1)2 with a = 11.238(3) ?, b = 31.719(11) ?, c = 7.684(2) ?, V = 2739.2(24) ?(3), and Z = 4. This isomer has the mer-(N,O-Lambda)(S,S) configuration, while K[Al(NDFFT)(2)] crystallizes from methanol/diethyl ether in the space group P6(1) (a = 21.269(8) ?, c = 9.643(3) ?, V = 3777.8(42) ?(3), Z = 6) and has the same coordination geometry. The solution thermodynamics of the Al(3+), Ga(3+), and Fe(3+) complexes have been studied by spectrophotometric titration. The stability constants (log K) are 23.6(1), 29.2(3), and 31.04(3), respectively, for the DFFTH(2) complexes and 22.0(1), 27.8(2), and 29.09(3), respectively, for the NDFFTH(2) complexes. Cyclic voltammograms of both iron complexes have been recorded in water at a carbon disk working electrode and in DMF at a graphite working electrode. The reduction waves measured in DMF indicate no reversibility whereas in water a quasi-reversible reduction is observed. The reduction potentials (E(1/2)'s) in water are -166 mV for [Fe(DFFT)(2)](-) and -97 mV for [Fe(NDFFT)(2)](-) versus NHE. These potentials are well in the range for biological reductants, which makes possible an in vivo reduction mechanism for the iron removal from the siderophore.     

Die Kristallstrukturen von KNdTe4, RbPrTe4 und RbNdTe4 — Untersuchungen zur thermischen Stabilität von KNdTe4 sowie Bemerkungen zu einigen anderen Vertretern der Zusammensetzung ALnTe4 (A = K,Rb, Cs und Ln = Seltenerd‐Metall)

Crystal Structures of KNdTe₄, RbPrTe₄, and RbNdTe₄ — Investigations concerning the Thermal Stability of KNdTe₄ as well as some Remarks concerning Additional Representatives of the Composition ALnTe₄ (A = K, Rb, Cs and Ln = Rare Earth Metal) Of the compounds ALnQ₄ (A = Na, K, Rb, Cs; Ln = Lanthanoid; Q = S, Se and Te) the crystal structures of the three new tellurides KNdTe₄, RbPrTe₄ and RbNdTe₄ were determined by X‐ray single‐crystal structure analysis and of the three additional new ones KCeTe₄, KPrTe₄ and CsNdTe₄ by X‐ray powder diffraction experiments. All six new compounds are isotypic with KCeSe₄. Characteristic for the crystal structure of the compounds mentioned above are layers built from (Q₂)^2— dumbbells in form of 4.3².4.3 nets with embedded cations A⁺ and Ln³⁺ between them, which are coordinated eightfold in form of square‐shaped antiprisms by Q ions. The distances Te‐Te within the dumbbells were found to be 277.8(2) pm for all investigated tellurides. By combination of X‐ray diffraction and DTA measurements it was shown that the compound KNdTe₄ is metastable at ambient temperature with a limited existence range between the temperatures 260 and 498 °C.     

Novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues

A series of novel open-chain and cyclic conformationally constrained (R)- and (S)-α,α-disubstituted tyrosine analogues 1a–e were synthesized in good yields and high optical purities (Schemes 1 and 2). The absolute configurations of these tyrosine analogues were unambiguously determined based on the X-ray structures of the precursor diastereoisomeric peptides of type 4 and 5 . Four of these structures are described (Figs. 1–4), showing β-turn type-I geometries for dipeptides 4a, 5b , and 4c and an extended conformation for peptide 5c (Table 3). The conversion of the free amino acids 1a–c into suitably protected building blocks 11a–d and 15d,e for peptide synthesis is discussed (Schemes 3 and 4).     

1,3-Cycloaddition von alkinen an hetero-1,3-diene 1-aminopyrrole aus 1,2-diazabuta-1,3-dienen und 1-diethylaminopropin

1-Aminopyrroles (4) are obtained by reaction of 1,2-diazabuta-1,3-dienes (1) and ynamines (2). This reaction represents one of the very rare examples of 1,3-cycloaddition processes of alkynes and hetero-1,3-dienes.     

A convenient synthesis of 1,3-oxazolidin-4-ones and 1,3-oxazin-4-ones

1,3-Oxazolidin-4-ones and 1,3-oxazin-4-ones were synthesized by formal cyclocondensation of imines with α- or β-hydroxy acids.     

Substituent Effects on the C-C Bond Strength, 15[1] Geminal Substituent Effects, 7[2]. Thermochemistry and Thermal Decomposition of Alkyl-substituted Tricyanomethyl Compounds

The thermolysis reactions of the tricyanomethyl compounds 10a-c were studied in solution. 2,2-Dicyano-3-methyl-3-phenylbutyronitrile ( 10a ) and 2,2-dicyano-3-methyl-3-(4-nitrophenyl)butyronitrile ( 10b ) decomposed heterolytically into carbenium ions and (CN)₃C⁻ anions, while 9-methyl-9-(tricyanomethyl)fluorene ( 10c ) underwent about 11% homolytic C-C bond cleavage into 9-methyl-9-fluorenyl- and tricyanomethyl radicals. The rates of the homolysis were determined by a radical scavenger procedure under conditions of pseudozero order kinetics. From the temperature effect on the rate constants the activation parameters were determined [ΔH ( 10c ) = 155· 2 kJ mol⁻¹, ΔS ( 10c ) = 58· 5 J mol⁻¹ K⁻¹]. Standard enthalpies of formation ΔH (g) were determined for 2,2-dicyanopropionitrile ( 2 ) (422.45 kJ mol⁻¹), 2,2-dicyanohexanenitrile ( 3 ) (349.74 kJ mol⁻¹), 2,2-dicyano-3-phenylpropionitrile ( 4 ) (540.75 kJ mol⁻¹), 2-butyl-2-methylhexanentrile ( 5 ) (-133.20 kJ mol⁻¹), 2,2-dimethylpentanenitrile ( 6 ) (-45.78 kJ mol⁻¹), and 2-methylbutyronitrile ( 7 ) (2.44 kJ mol⁻¹) from the enthalpies of combustion and enthalpies of sublimation/vaporization. From these data and known Δ (g) values for alkanenitriles and -dinitriles, thermochemical increments for ΔH (g) were derived for alkyl groups with one, two, or three cyano groups attached. The comparison of these increments with those of alkanes reveals a strong geminal destabilization, which is interpreted by dipolar repulsions between the cyano groups. - From ΔH (g) of 10c and ΔH of its homolytic decomposition the radical stabilization enthalpy for the tricyanomethyl radical 1 RSE ( 1 ) = -18 kJ mol⁻¹ was determined. Thus, 1 is destabilized, in comparison with the RSEs of tertiary α-cyanalkyl (23 kJ mol⁻¹) and α,α-dicyanoalkyl (27 kJ mol⁻¹) radicals, which were recalculated from bond homolysis measurements^[4] and the new thermochemical data. This change of RSE on increasing the number of α-cyano groups is discussed as the result of the additive contributions by resonance stabilization and increasing destabilization by dipolar repulsion. The amount of the dipolar energies was estimated by molecular mechanics (MM2).     

A hexa-peri-hexabenzocoronene cyclophane: an addition to the toolbox for molecular electronics

Cyclophanes with the largest-to-date polycyclic aromatic hydrocarbon (hexa-peri-hexabenzocoronene, HBC) to be entrained in such a structural motif are reported. The two disks are covalently captured by intermolecular ring-closing olefin metathesis of dienes in good yield. DSC, optical microscopy, and WAXD show the new cyclophanes to self-assemble to thermotropic columnar liquid crystal mesophases similar to monomeric analogues. Solution spectroscopic studies reveal that the two disks within a single unit lie face-to-face, with a small average lateral offset. Self-assembly into two-dimensional crystals at a solid-liquid interface was visualized by STM, and the electrical properties of single molecules were assessed by scanning tunneling spectroscopy revealing a diode-like behavior which is similar to that previously reported for single HBC disks, laying the groundwork for future electrical interrogations of dynamic molecular complexes.