Potential for micromachined actuation of ultra-wide continuously tunable optoelectronic devices

Tailored scaling represents a principle of success that, both in nature and in technology, allows the effectiveness of physical effects to be enhanced. Mutation and selection in nature are imitated in technology, e.g. by model calculation and design. Proper scaling of dimensions in natural photonic crystals and our fabricated artificial 1D photonic crystals (DBRs, distributed Bragg reflectors) enable efficient diffractive interaction in a specific spectral range. For our optical microsystems we illustrate that tailored miniaturization may also increase the mechanical stability and the effectiveness of spectral tuning by thermal and electrostatic actuation, since the relative significance of the fundamental physical forces involved considerably changes with scaling. These basic physical principles are rigorously applied in micromachined 1.55-μm vertical-resonator-based devices. We modeled, implemented and characterized 1.55-μm micromachined optical filters and vertical-cavity surface-emitting laser devices capable of wide, monotonic and kink-free tuning by a single control parameter. Tuning is achieved by mechanical actuation of one or several air-gaps that are part of the vertical resonator including two ultra-highly reflective DBR mirrors of strong refractive index contrast: (i) Δn=2.17 for InP/air-gap DBRs (3.5 periods) using GaInAs sacrificial layers and (ii) Δn=0.5 for Si₃N₄/SiO₂ DBRs (12 periods) with a polymer sacrificial layer to implement the air-cavity. In semiconductor multiple air-gap filters, a continuous tuning of >8% of the absolute wavelength is obtained. Varying the reverse voltage (U=0–5 V) between the membranes (electrostatic actuation), a tuning range of >110 nm was obtained for a large number of devices. The correlation of the wavelength and the applied voltage is accurately reproducible without any hysteresis. In two filters, tuning of 127 and 130 nm was observed for about ΔU=7 V. The extremely wide tuning range and the very small voltage required are record values to the best of our knowledge. For thermally actuated dielectric filters based on polymer sacrificial layers, Δλ/ΔU=-7 nm/V is found. Received: 10 May 2002 / Published online: 8 August 2002     

Magnetic anisotropy of textured CrO2 thin films investigated by X-ray magnetic circular dichroism

Highly a-axis-textured CrO₂ films have been deposited on Al₂O₃ (0001) substrates by chemical vapor deposition. CrO₂ has been found to have highly a-axis (010)-oriented columnar growth on a Cr₂O₃ (0001) initial layer. The six-fold surface symmetry of the Cr₂O₃ initial layer leads to three equivalent in-plane orientations of the a-axis-oriented CrO₂ unit cell. We report Cr L_2,3 X-ray magnetic circular dichroism data along the surface normal and at 60° off-normal sample orientation. For a 60° sample alignment, a strong increase of the projected orbital moment could be observed for unoccupied majority t_2g states using moment analysis. Therefore, the c axis is identified as the intrinsic magnetic easy axis of CrO₂. In addition, a small spin moment and a very strong magnetic dipole term T_z have been found. Received: 8 January 2002 / Accepted: 8 January 2002     

Spray thermometry using thermographic phosphors

In this study a novel technique for 2D spray temperature measurement is presented. For this purpose the thermographic phosphor (TP) Mg₄GeO_5.5F:Mn was dispersed in n-dodecane and atomised using a conventional semi solid-cone nozzle. The thermographic phosphor was excited electronically by a frequency tripled Nd:YAG laser (355 nm). An ICCD-camera in combination with an image doubler detected the subsequently emitted phosphorescence at both peak emission wavelengths located at 633 nm and 659 nm, respectively. Utilising suitable calibration measurements, the local spray temperature was determined by evaluating the intensity ratio of both emission wavelengths. To the knowledge of the authors this is the first approach of spray temperature measurement exploiting the temperature dependent intensity ratio of thermographic phosphors. PACS 07.20.Dt; 32.50.+d     

Modification of single molecule fluorescence by a scanning probe

We examine the optical near-field interaction between different types of scanning tips and single oriented fluorescent molecules. We demonstrate the influence of a tip on the excitation intensity as well as on the integrated fluorescence signal, the excited state lifetime, and the angular emission of single molecules. By using a standard model describing the radiation of an oscillating dipole close to a nanosphere or a flat interface, we interpret our observations and describe some central criteria for obtaining fluorescence enhancement or quenching. PACS 33.80.-b; 07.79.Fc; 78.90.+t     

Precision of a dual energy X-ray absorptiometry device

The standard method to diagnose and follow-up osteoporosis is the measurement of bone mineral density (BMD) using dual X-ray absorptiometry (DEXA). Manufacturers' manuals of DEXA devices state the intrascanner coefficient of variance is less than 0.01 g/cm². The aim of this study was to evaluate the in vivo coefficient of variance of a Lunar DPX scanner in male and female healthy adult subjects. Average BMD for females and males were 1.170±0.091 g/cm² and 1.272±0.115 g/cm², respectively. Monthly phantom measurements provided and controlled by the manufacturer were 1.243±0.008 g/cm² (range 1.222 to 1.257) and the coefficient of variance was 0.006. It is concluded that the in vivo coefficient of variance of DEXA devices can slightly be higher than that proposed by the manufacturer. This revised version was published online in August 2006 with corrections to the Cover Date.     

Investigating and ordering Quadrilaterals and their analogies in space—problem fields with various aspects

Problem fields with one or two generating problems and possibilities of varying existing problems give a good chance for self-activities of students and can be used for reaching different general aims. In this paper some topics concerning quadrilaterals will be presented. I hope they will animate teachers for more problem orientation in mathematics education. First we will reflect about different types of convex and non-convex quadrilaterals and possibilities of ordering them. Then we focus on middle-quadrilaterals and types of quadrilaterals with special middle-quadrilaterals as well as their logical ordering. Finally we investigate the analogies in space to the parallelogram and its sub-types and order them in the “house of parallelepipeds”.     

Spreading Code Design Using a Global Optimization Method

The performance of a code division multiple access system depends on the correlation properties of the employed spreading code. Low cross-correlation values between spreading sequences are desired to suppress multiple access interference and to improve bit error performance. An auto-correlation function with a distinct peak enables proper synchronization and suppresses intersymbol interference. However, these requirements contradict each other and a trade-off needs to be established. In this paper, a global two dimensional optimization method is proposed to minimize the out-of-phase average mean-square aperiodic auto-correlation with average mean-square aperiodic cross-correlation being allowed to lie within a fixed region. This approach is applied to design sets of complex spreading sequences. A design example is presented to illustrate the relation between various correlation characteristics. The correlations of the obtained sets are compared with correlations of other known sequences.     

Magnetic phases in Mn<Subscript>1</Subscript>_<Subscript>x</Subscript>Fe<Subscript>x</Subscript>WO<Subscript>4</Subscript> studied by neutron powder diffraction

The magnetic structures of Mn_1-xFe_xWO₄ with x = 0.0, 0.16, 0.21, 0.225, 0.232, 0.24, 0.27, 0.29, and 1.0 were refined from neutron powder diffraction data. The magnetic phase diagram could be completed in the coexistence range of different magnetic structures up to x = 0.29. For the magnetic state at 1.5 K a commensurate antiferromagnetic structure with a propagation vector = (±1/4, 1/2, 1/2) was found for x ⩽ 0.22 while the magnetic spins order with = (1/2, 0, 0) for x ≥ 0.22. In the latter phase, additionally, weak magnetic reflections indexed to an incommensurate ordering with = (- 0.214, 1/2, 0.457) occur in the diffraction pattern up to x = 0.29 indicating the occurence of a reentrant phase. For 0.12 ⩽ x ⩽ 0.29 the low temperature phases are separated from a magnetic high temperature phase showing only magnetic reflections indexed to a spin arrangement with = (1/2, 0, 0). The magnetic phase diagram is discussed qualitatively considering random superexchange between the statistically distributed Mn²⁺- and Fe²⁺-ions in the coexistence range 0.12 ⩽ x ⩽ 0.29 of different magnetic structures related to those of pure MnWO₄ and FeWO₄. Received 9 October 2002 Published online 14 March 2003     

Some Further Properties of the Accelerated Kerr-Schild Metrics

We extend the previously found accelerated Kerr-Schild metrics for Einstein-Maxwell-null dust and Einstein-Born-Infeld-null dust equations to the cases including the cosmological constant. This way we obtain the generalization of the charged de Sitter metrics in static space-times. We also give a generalization of the zero acceleration limit of our previous Einstein-Maxwell and Einstein-Born-Infeld solutions.