Biosynthetic studies on the cyclopentane ring formation of allosamizoline, an aminocyclitol component of the chitinase inhibitor allosamidin

Allosamizoline (1) is an aminocyclitol component of allosamidin, a Streptomyces metabolite, and has a cyclopentane ring originated from D-glucosamine. Biosynthesis of the cyclopentane ring was studied by feeding experiments with a variety of deuterium-labeled glucosamine and glucose. In the feeding experiments with [3-(2)H]- and [4-(2)H]-D-glucosamine and [1-(2)H]-D-glucose, deuterium was incorporated into C-3, C-4, and C-1 of 1, respectively. On the other hand, feeding experiments with [5-(2)H]- and [6,6-(2)H(2)]-D-glucosamine showed that deuterium on C-5 and one of the two deuterium atoms on C-6 of glucosamine were lost during the cyclopentane ring formation of 1. In the feeding experiments with (6R)- and (6S)-[6-(2)H(1)]-D-glucose, the (6R)-deuterium of glucose was incorporated into the proS position on C-6 of 1, but the (6S)-deuterium of glucose was not incorporated into 1. These results suggested that an intermediate with a 6-aldehyde group is involved in the biosynthesis of the cyclopentane ring moiety of 1 and overall inversion of stereochemistry of the C-6 methylene group occurred by stereospecific oxidation and reduction on C-6 during the formation of 1. The 6-aldehyde intermediate may play a key role in the biosynthetic step(s) of cyclization to form the cyclopentane ring and/or deoxygenation at C-5.     

Phosphorescence of biacetyl sensitized by benzene in gas phase pulse radiolysis

The phophorescence of biacetyl induced by an energy transfer to biacetyl from triplet benzene produced in the pulse radiolysis of benzene-biacetyl mixtures has been studied. The time required to reach the maximum intensity of phosphorescence, t_max, after the electron pulse, varies as a function of biacetyl pressure at constant benzene pressure (40 torr), which gives the lifetime of triplet benzene τ = (6.7 ± 3.2) × 10⁻⁶ s and the rate constant of the energy transfer k_{C6H6^*(T1) + biacetyl} = (1.6 ± 0.7) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹.     

Removal of boron(III) by N-methylglucamine-type cellulose derivatives with higher adsorption rate

To obtain adsorbents for boron(III) derived from a natural polymer, two forms (powder and fiber) of N-methylglucamine-type cellulose derivatives were newly synthesized. After the graft polymerization of two forms of cellulose with vinyl monomer having epoxy groups, the N-methylglucamine-type cellulose derivatives were obtained by the reaction of the grafted cellulose with N-methylglucamine. The adsorption capacities of the cellulose derivatives for boron(III) were the same levels as that of a commercially available N-methylglucamine-type polystyrene resin. However, the cellulose derivatives adsorbed boron(III) more quickly than the polystyrene resin. The adsorption and desorption of boron(III) with a column method using the cellulose fiber were achieved at a higher flow rate than that using the polystyrene resin. In addition, the boron(III), adsorbed on the cellulose fiber column, was quantitatively recovered with dilute hydrochloric acid in 20- and 200-fold increased concentrations. Consequently, it was found that the cellulose derivatives were superior to the polystyrene resin as adsorbents for boron(III) for treatment of a large quantity of wastewater.     

STM observation of alkyl-chain-assisted self-assembled monolayers of pyridine-coordinated porphyrin rhodium chlorides

Alkyl-chain-assisted self-assembled monolayers of pyridine-coordinated porphyrin rhodium chlorides were observed at the solid-liquid interface by scanning tunneling microscopy (STM). The resolved images at a molecular level were obtainable in the pure solution of pyridine-coordinated porphyrin rhodium chloride with four triacontyl groups [Rh(C300PP)(Cl)(Py)]. In the case of pyridine-coordinated porphyrin rhodium chloride with four octadecyl groups [Rh(C18OPP)(Cl)(Py)], the STM images were not obtainable in the pure solution of Rh(C18OPP)(Cl)(Py) but obtainable in the mixture containing Rh(C18OPP)(Cl)(Py) and free porphyrin C18OPP. On the basis of the mixed self-assembled monolayer analysis, the apparent difference in the adsorption free energy between Rh(CnOPP)(Cl)(Py) and CnOPP (deltaGapp) was calculated. The calculated deltaGapp values for C18OPP and C30OPP mixed systems were quite different. The disadvantage of the adsorption free energy of Rh(C18OPP)(Cl)(Py) makes it difficult to obtain molecularly resolved images of Rh(C18OPP)(Cl)(Py), and the large adsorption energy due to the long alkyl chains enabled us to obtain molecularly resolved images of Rh(C30OPP)(Cl)(Py).     

Thiocarbonyl induced heterocumulenic Pauson-Khand type reaction: expedient synthetic method for thieno[2,3-b]indol-2-ones

The first examples of C[double bond, length as m-dash]S induced Pauson-Khand type reactions are described; 2-alkynylphenyl isothiocyanates were converted to 3-substituted-2H-thieno[2,3-b]indol-2-ones in the presence of a stoichiometric amount of Mo(CO)(6) or Co(2)(CO)(8), or a catalytic amount of Rh catalyst under an atmospheric pressure of carbon monoxide.     

X-ray photoelectron spectroscopy-based valence band spectra of passive films on titanium

Titanium (Ti) is always covered by thin passive films. Thus, valence band (VB) spectra, obtained using X-ray photoelectron spectroscopy (XPS), are superpositions of the VB spectra of passive films and that of the metallic Ti substrate. In this study, to obtain the VB spectra only of passive films, angular resolution (for eliminating the substrate Ti contribution) and argon ion sputtering (for removing passive films) were used along with XPS. The passive film on Ti was determined to consist of a very thin TiO₂layer with small amounts of Ti₂O₃, TiO, hydroxyl groups, and water with a thickness of 5.9 nm. The VB spectra of Ti were deconvoluted into four peak components: a peak at ~1 eV, attributed to the Ti metal substrate; a broad peak in the 3–10 eV range, mainly attributed to O 2p (~6 eV) and O 2p-Ti 3d hybridized states (~8 eV), owing to the π (non-bonding) and σ (bonding) orbitals in the passive oxide film; and a peak at ~13 eV, attributed to the 3σ orbital of O 2p as OH⁻or H₂O. The VB region spectrum between approximately 3 and 14 eV from Ti is originating from the passive film on Ti. In particular, characterization of VB spectrum obtained with a takeoff angle of less than 24° is effective to obtain VB spectrum only from the passive film on Ti. The property as n-type semiconductor of the passive film on Ti is probably higher than that of rutile TiO₂ceramics.     

Optically transparent conductive network formation induced by solvent evaporation from tin-oxide-nanoparticle suspensions

This investigation describes an optically transparent antistatic film composed of antimony-doped tin oxide (ATO) nanoparticles dispersed in a polymer matrix, with remarkably improved electrical and optical properties. The film is fabricated on the basis of a synergistic interaction between self-assembling nanoparticles and self-organizing matrix materials. The antistatic property of the film is obtained at ATO concentrations above a threshold value. A scaling analysis of the data yields an extremely low critical concentration (0.0020 volume fraction), which is considerably lower than the value predicted by percolation theory. Microscopic observations of the film have revealed a characteristic microstructure: "single-stranded" chainlike (linear form or fibrous) aggregates consisting of ATO nanoparticles and large ATO-depleted areas. The experiment results suggest that the high optical transparency and the low critical concentration are derived from the characteristic microstructures of the film.     

Anion-exchange chromatographic study of the chlorine isotope effect accompanying hydration

The single-stage separation factor for chlorine isotopes ((35)Cl and (37)Cl) was determined to be 1.00034 by anion exchange chromatography on a 4.5-m column operated in reverse breakthrough manner at 25 degrees C. This value is in good agreement with those obtained in our previous works. It was confirmed that the lighter isotope ((35)Cl) was preferentially fractionated into the resin phase, whereas the heavier isotope ((37)Cl) partitioned into the aqueous phase. This observation, however, contradicts the experimental results for Cl isotope fractionation during NaCl precipitation and the recent theoretical results on Cl isotope fractionation: the (37)Cl isotope selectively enriched into the solid phase and not into the aqueous phase. This discrepancy is discussed based on the theory of isotope distribution between two phases. It is suggested that the chromatographic results reflect an isotope effect accompanying hydration rather than an isotope effect due to a phase change, whereas the reverse is the case for the results in the NaCl precipitation study.     

Substituent effects in benz[a]anthracene carbocations: a stable ion, electrophilic substitution (nitration, bromination), and DFT study

A series of novel carbocations were generated from isomeric monoalkylated and dialkylated benz[a]anthracenes (BAs) by low-temperature protonation in FSO(3)H/SO(2)ClF. With the monoalkyl derivatives (5-methyl, 6-methyl, 7-methyl, and 7-ethyl) as well as the D-ring methylated analogues (9-methyl, 10-methyl, and 11-methyl), the C-7 or the C-12 protonated carbocations were observed (as the sole or major carbocation) in all cases. Protonation of the 12-methyl derivative (9) gave the C-7 protonated carbocation (9H+) as the kinetic species and the ipso-protonated carbocation (9aH+) as the thermodynamic cation. With the 12-ethyl derivative (10), relief of steric strain in the bay-region greatly favors ipso-protonation (10aH+). With 3,9-dimethyl (14), C-7 protonation (14H+) is strongly favored (with <10% protonation at C-12), and with 1,12-dimethyl (15) the sole species observed is the C-7 protonated carbocation (15H+). For 7-methyl-12-ethyl, 7-ethyl-12-methyl, and 7,12-diethyl derivatives (16, 17, and 18), two ipso-protonated carbocations were initially formed (C-7/C-12), rearranging in time to give the C-12 protonated carbocations exclusively (16aH+, 17aH+, and 18aH+). Protonation outcomes are compared with the computed relative energies by DFT. Charge delocalization paths in the resulting carbocations were deduced based on the magnitude of Deltadelta13C values. For the thermodynamically more stable C-12 protonated carbocations, the charge delocalization path is analogous to those derived based on computed NPA charges for the benzylic carbocations formed by 1,2-epoxide (bay-region) and 5,6-epoxide (K-region) ring opening. Nitration (and bromination) of the 4-methyl, 7-methyl, 7-ethyl, 3,9-dimethyl, and 1,12-dimethyl derivatives resulted in isolation and characterization of several novel derivatives. Excellent agreement is found between low-temperature protonation selectivities and the regioselectivities observed in model substitution reactions.